Display bike and tire pressure
#1
Senior Member
Thread Starter
Display bike and tire pressure
Hello!
I'm restoring a Benotto 850 that I found abandoned. I don't intend to ride it, as its not my size, and the frame is known for breaking at the seat tube / bottom bracket weld.
I do want however to make it shine, as I intend to display it on a wall at my home office.
The wall in question is quite high, and I can't easily reach it, so I was wondering what can I do with the tires to avoid having to pump them up every couple of months to keep them looking good. I know there are solid tires, but I've been unable to find one that has the size I need.
Any idea? I don't care if the bike is unrideable after doing whatever is needed as it will only be a display piece.
I'm restoring a Benotto 850 that I found abandoned. I don't intend to ride it, as its not my size, and the frame is known for breaking at the seat tube / bottom bracket weld.
I do want however to make it shine, as I intend to display it on a wall at my home office.
The wall in question is quite high, and I can't easily reach it, so I was wondering what can I do with the tires to avoid having to pump them up every couple of months to keep them looking good. I know there are solid tires, but I've been unable to find one that has the size I need.
Any idea? I don't care if the bike is unrideable after doing whatever is needed as it will only be a display piece.
#2
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,627
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3890 Post(s)
Liked 6,490 Times
in
3,213 Posts
The tires need to look of appropriate quality, or it's going to throw the whole bike off. You have at least three options:
1. Mount appropriate tubes/tires and inflate every five months.
2. Mount appropriate tires without tubes and stuff with something like plastic peanuts.
3. Do not mount any rubber on the rims.
1. Mount appropriate tubes/tires and inflate every five months.
2. Mount appropriate tires without tubes and stuff with something like plastic peanuts.
3. Do not mount any rubber on the rims.
#3
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
In my experience, if you don't have anything pressing against the tire, then a suspended bike with severely underinflated tires will not necessarily look it. A less supple wire bead tire (like Michelin Dynamic Classic) will hold its shape fairly well, despite having only a few psi in the tube. It's why I check and reinflate before every ride!
Likes For noobinsf:
#4
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I'd add: use thick tubes that are known not to have slow leaks (I assume everyone else has a diverse stash to draw from, too ), and go ahead and pump them up as far as you're comfortable when you do. No need to air these down for 15% drop!
#5
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,716 Times
in
2,613 Posts
Back in my bike shop days, we sold these really thick “flat prevention/thorn proof” tubes that were close to solid but not quite. We all hated installing and removing them (the latter of which often involved destroying the tire). Perhaps you can still get those.
#6
Senior Member
Thread Starter
The tires need to look of appropriate quality, or it's going to throw the whole bike off. You have at least three options:
1. Mount appropriate tubes/tires and inflate every five months.
2. Mount appropriate tires without tubes and stuff with something like plastic peanuts.
3. Do not mount any rubber on the rims.
1. Mount appropriate tubes/tires and inflate every five months.
2. Mount appropriate tires without tubes and stuff with something like plastic peanuts.
3. Do not mount any rubber on the rims.
Inflating them every X months is a PITA, as I can't reach the bike easily where I want to hang it.
#8
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,529
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1508 Post(s)
Liked 3,480 Times
in
1,133 Posts
I'd try a flexible foam rod sold by your local hardware/building supply store. Available in diameters up to 1 1/4". Do an internet search for "foam caulk backer rod" or "caulk filler rope."
Brent
Brent
Likes For obrentharris:
#9
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,867
Bikes: Too many to list here check my signature.
Mentioned: 193 Post(s)
Tagged: 2 Thread(s)
Quoted: 2935 Post(s)
Liked 2,932 Times
in
1,496 Posts
Personally, as stated, I wouldn’t worry about it.
if you want to put something in the tire to hold shape try pipe insulation. It comes in a variety of diameters
if you want to put something in the tire to hold shape try pipe insulation. It comes in a variety of diameters
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#10
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,997
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4957 Post(s)
Liked 8,099 Times
in
3,833 Posts
This ^^^. Easy solution.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Last edited by Eric F; 01-03-22 at 06:21 PM.
#11
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
I don't know as I've never used the product/s, but what about the stuff they put in tubeless tires? Or that "slime" stuff. Maybe either would provide a more durable seal on the tube.
#12
Senior Member
Thread Starter
That seems like a great idea. I have to find one that fits inside 700x21 tires, but I think it should work!
#13
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
That pipe insulation is measured for the inside diameter. IOW's, it's measured for what size pipe it's intended to insulate. So, you will have trouble finding something small enough. Perhaps some clear, flexible vinyl tubing? It should have the rigidity to give the appearance of an inflated tire. None of it is sold in metric, though...all in standard...ie. 1/2in, 3/4in, 1in, etc
#14
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
That pipe insulation is measured for the inside diameter. IOW's, it's measured for what size pipe it's intended to insulate. So, you will have trouble finding something small enough. Perhaps some clear, flexible vinyl tubing? It should have the rigidity to give the appearance of an inflated tire. None of it is sold in metric, though...all in standard...ie. 1/2in, 3/4in, 1in, etc
#15
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
you need a library ladder.
#16
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
This stuff is available in 16mm, 18mm, or 20mm outer diameter: https://www.amazon.com/uxcell-Tubing.../dp/B09521HQHL
#17
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,025
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 925 Times
in
370 Posts
I would go with the foam option, but there's also things like the Vittoria Air Liner or Tannus Armour
__________________
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
#18
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,752 Times
in
939 Posts
Install thorn resistant inner tubes, pump them to prescribed pressure and forget about them for years. They do not bleed air like the flimsy inner tubes commonly fitted to vintage road bikes...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#19
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,053
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4513 Post(s)
Liked 6,388 Times
in
3,673 Posts
Hello!
I'm restoring a Benotto 850 that I found abandoned. I don't intend to ride it, as its not my size, and the frame is known for breaking at the seat tube / bottom bracket weld.
I do want however to make it shine, as I intend to display it on a wall at my home office.
The wall in question is quite high, and I can't easily reach it, so I was wondering what can I do with the tires to avoid having to pump them up every couple of months to keep them looking good. I know there are solid tires, but I've been unable to find one that has the size I need.
Any idea? I don't care if the bike is unrideable after doing whatever is needed as it will only be a display piece.
I'm restoring a Benotto 850 that I found abandoned. I don't intend to ride it, as its not my size, and the frame is known for breaking at the seat tube / bottom bracket weld.
I do want however to make it shine, as I intend to display it on a wall at my home office.
The wall in question is quite high, and I can't easily reach it, so I was wondering what can I do with the tires to avoid having to pump them up every couple of months to keep them looking good. I know there are solid tires, but I've been unable to find one that has the size I need.
Any idea? I don't care if the bike is unrideable after doing whatever is needed as it will only be a display piece.
#20
Junior Member
Join Date: Sep 2021
Location: So Cal
Posts: 97
Bikes: 2023 S-Works Tarmac SL7 Dura-Ace Di2, 2022 Cervelo Caledonia-5 SRAM Rival etap AXS, 2019 Specialized Sirrus Elite Alloy, 1977 Schwinn Super LeTour 12.2, 85 Bianchi Limited Shimano New 600EX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 50 Times
in
28 Posts
Likes For Bici Veloce:
#21
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,442
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 641 Times
in
407 Posts
What, can't one link an electric pump to an app these days? "Alexa, pump up my tires"
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.