Regina freewheel question
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,055
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
Regina freewheel question
So all of my previous bikes had/have fixed, 3-speed or 4-speed. This is my first venture with these new-fangled 5-speeds. When I bought these two, I was just looking at the big cog, I wanted a 24. Now that I am putting them on the on the wheel, I notice the difference between the two.
I assume the one on the right is older. The small cog on the right is flush, on the left, it is an outie. On the back, the big cog on the left is flush, the one on the right is an outie. There are less threads on the right one. When mounted, the one on the left has more clearance from the spokes. I will be using the one on the left for this build.
Can anyone tell me what's going on? I have seen the one on the left in the Regina catalog. What's with the one on the right?
I assume the one on the right is older. The small cog on the right is flush, on the left, it is an outie. On the back, the big cog on the left is flush, the one on the right is an outie. There are less threads on the right one. When mounted, the one on the left has more clearance from the spokes. I will be using the one on the left for this build.
Can anyone tell me what's going on? I have seen the one on the left in the Regina catalog. What's with the one on the right?
#2
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
So all of my previous bikes had/have fixed, 3-speed or 4-speed. This is my first venture with these new-fangled 5-speeds. When I bought these two, I was just looking at the big cog, I wanted a 24. Now that I am putting them on the on the wheel, I notice the difference between the two.
I assume the one on the right is older. The small cog on the right is flush, on the left, it is an outie. On the back, the big cog on the left is flush, the one on the right is an outie. There are less threads on the right one. When mounted, the one on the left has more clearance from the spokes. I will be using the one on the left for this build.
Can anyone tell me what's going on? I have seen the one on the left in the Regina catalog. What's with the one on the right?
I assume the one on the right is older. The small cog on the right is flush, on the left, it is an outie. On the back, the big cog on the left is flush, the one on the right is an outie. There are less threads on the right one. When mounted, the one on the left has more clearance from the spokes. I will be using the one on the left for this build.
Can anyone tell me what's going on? I have seen the one on the left in the Regina catalog. What's with the one on the right?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#3
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7351 Post(s)
Liked 2,478 Times
in
1,439 Posts
Different models, different designs. Long ago, I worked in a bike shop (Toga Bike Shop in NYC) that liked Regina freewheels for their versatility. We had to stock various size cogs for various different positions. The big cogs were screwed on from the back with reverse threads. It's cool until you consider that stock freewheels offer just about any combo a person would want.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Likes For noglider:
#4
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
on the older Regina multi-speed blocks there were two body patterns
recall the firm offering 6V at least as far back as the late fifties
if one wished to build a 6V it was necessary to employ the body termed the "Scalare"
will pipe down now and wait for someone who really knows what they are talking about - calling @pastorbobnlnh
-----
on the older Regina multi-speed blocks there were two body patterns
recall the firm offering 6V at least as far back as the late fifties
if one wished to build a 6V it was necessary to employ the body termed the "Scalare"
will pipe down now and wait for someone who really knows what they are talking about - calling @pastorbobnlnh
-----
Likes For juvela:
#5
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,886
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1453 Post(s)
Liked 2,196 Times
in
963 Posts
I've only worked on the model on the right a few times. I assume it is an older model. However, I don't recall the ones I worked on had the pawl's pivot holes drilled all the way through the inner body. This is more typical of some Atom and Maillard models.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#6
Full Member
Join Date: Nov 2022
Location: California's capital
Posts: 467
Bikes: Litespeed Firenze, Spot Acme, Specialzed S Works Pro Race, Davidson Stiletto, Colnago Superissimo
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 133 Post(s)
Liked 302 Times
in
173 Posts
As a data point, my Regina freewheels are newer CX/CX-S 6/7 speed and the 7sp is like the lefthand one--flush in back with the low cog extending past the lock ring. 6SP is flush in front, being 5mm narrower. I'm inferring the one on the right is earlier, being a complete departure from newer models.
As to what's with the lock ring in back...is that the only way to get at the bearings?
As to what's with the lock ring in back...is that the only way to get at the bearings?
#7
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,530
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 792 Post(s)
Liked 1,783 Times
in
638 Posts
The one on the left is a multi speed design the last two cogs screw off to change gearing. But can be difficult to get apart.
Last edited by zukahn1; 03-17-24 at 02:03 PM.
#8
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,817
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 839 Post(s)
Liked 1,258 Times
in
663 Posts
the mention of the "scalare" body above is a possibility.
The other possibility is that the one on the right was a 6 speed and the outer cog was replaced with one that was intended for use as a middle cog.
on the 6 speed, the outer cog was theaded onto the 5th cog, not onto the body.
Reginas are not my first choice in freewheels for bikes I ride - I will have 2 5-speeds up for sale soon, one VG, one NOS, with nice chain
/markp
The other possibility is that the one on the right was a 6 speed and the outer cog was replaced with one that was intended for use as a middle cog.
on the 6 speed, the outer cog was theaded onto the 5th cog, not onto the body.
Reginas are not my first choice in freewheels for bikes I ride - I will have 2 5-speeds up for sale soon, one VG, one NOS, with nice chain
/markp
#9
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
So the one on the right is scary-lare?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#10
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,530
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 792 Post(s)
Liked 1,783 Times
in
638 Posts
The one on the right is older late 60's design the one on the left is late 70's early 80's .
#11
Senior Member
Thread Starter
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,055
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
I was able to remove the outer 2 cogs on the right freewheel. Not easy. Left handed, as expected. The middle cog was the same threading, diameter and left handed, but couldn't get it off. That bugger was on tight and I see no need to remove it other than for curiosity.
One other fun fact. Center to center from small to big on the left freewheel is 24mm, like the catalog says. The right, 21.2mm (ish). So then I took out a 3/32 chain. Fits fine. Go figure. So I think @mpetry912 is correct. Maybe a narrow 6 converted to a 5.
Also, I changed my mind. I'll use a spacer to save the spokes and use the one on the right. It is for a 1951 bike. Seems more appropriate.
Finally, since it is a narrower body, it can't be a scalare. Those have a wider body, according to the catalog.
One other fun fact. Center to center from small to big on the left freewheel is 24mm, like the catalog says. The right, 21.2mm (ish). So then I took out a 3/32 chain. Fits fine. Go figure. So I think @mpetry912 is correct. Maybe a narrow 6 converted to a 5.
Also, I changed my mind. I'll use a spacer to save the spokes and use the one on the right. It is for a 1951 bike. Seems more appropriate.
Finally, since it is a narrower body, it can't be a scalare. Those have a wider body, according to the catalog.
Likes For iab:
#12
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,707
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1952 Post(s)
Liked 2,013 Times
in
1,112 Posts
Fingers Crossed: the small cog on the older one won't skip with a new chain.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#13
Senior Member
Thread Starter
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,055
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
I was on Mark Campbell's Cordorino site. He seems to believe the last two digits on what's stamped on the back of the right freewheel (254) is a date. So made in 1954.
#14
Junior Member
Here's a page from Regina's 1978 catalog showing the difference between regular and "scalare" (close-ratio) freewheels.