How fast should tires lose air?
#1
Senior Member
Thread Starter
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,142
Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 677 Post(s)
Liked 460 Times
in
182 Posts
How fast should tires lose air?
Seems if I haven't ridden a bike in a week or so the tire pressure drops from 100 psi down to about 60 psi.
Is this normal? Not just one particular bike but all 5 that I own.
Is this normal? Not just one particular bike but all 5 that I own.
#4
LBKA (formerly punkncat)
Join Date: Jan 2010
Location: Jawja
Posts: 4,299
Bikes: Spec Roubaix SL4, GT Traffic 1.0
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 2208 Post(s)
Liked 960 Times
in
686 Posts
My road bike needs the air topped every subsequent daily ride. I try to be very specific about the pressure in those tires, as well as the comment above cause wise.
My city bike I have often just "finger pinch" check and go for a week or so because I am (mostly) not as concerned about it on that bike and MUCH larger tires.
My city bike I have often just "finger pinch" check and go for a week or so because I am (mostly) not as concerned about it on that bike and MUCH larger tires.
#5
Sophomore Member
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
I like to think by keeping my tires aired up to nice high pressures, I can avoid a lot of flats. IMO, soft tires tend to pick up more debris, have a larger contact patch, and have more "give" if poked with something sharp, which invites sharp objects to get a foothold. Which is yet another reason I'm not a huge fan of the whole "run your 120 lb rated tires at 60 PSI" fad.
Last edited by Lemond1985; 10-12-20 at 11:15 AM.
#6
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,039 Times
in
1,877 Posts
I find that the ability to hold pressure will vary with the tube. It can occur even within a brand/model. One will hold air well, while another will lose pressure relatively quickly, yet there are no leaks to be found during a submersion test. I put it down to poor quality control during the manufacturing process. Then, of course, there's also some natural variation due to thickness and compounds. It was amazing how many upset customers would come into the shop because they thought they shouldn't have to pump up their tyres more than once a year! When I started riding tubulars, back in the early 1970s, it was standard procedure to top them off, daily.
#7
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
@robertj298 - Yes
Interesting you would ask about how fast a tire looses air (pressure) instead of how long a tire should hold pressure.
I check and pump before every ride.
Interesting you would ask about how fast a tire looses air (pressure) instead of how long a tire should hold pressure.
I check and pump before every ride.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#8
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,111
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,024 Times
in
666 Posts
The higher the pressure, the faster the loss.
#9
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,442
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 641 Times
in
407 Posts
+1
I've stepped down form 145PSI 23's to 120PSI 25's last year, and am now experimenting with 110PSI. No change, every day need a top-off of a few PSI regardless.
I've stepped down form 145PSI 23's to 120PSI 25's last year, and am now experimenting with 110PSI. No change, every day need a top-off of a few PSI regardless.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#10
Senior Member
Join Date: Dec 2005
Posts: 17,160
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,716 Times
in
2,613 Posts
That's why the good people at Park Tool sell pumps.
#11
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Depends on the tubes. I like latex and the very thin butyl Continental Race 28 Lite, both of which lose pressure more quickly. Latex tubes need to be checked every day and it's not unusual for those to lose 20 psi overnight. With thinner sidewall tires it's easier to get snakebite pinch flats.
My hybrids have heavier tubes and I might check them once a week. Even if they're a little low it doesn't matter much because I'm using 700x32 up to 700x40 tires, with more rigid sidewalls so they're a bit more resistant to snakebite flats.
My hybrids have heavier tubes and I might check them once a week. Even if they're a little low it doesn't matter much because I'm using 700x32 up to 700x40 tires, with more rigid sidewalls so they're a bit more resistant to snakebite flats.
#12
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
I like to think by keeping my tires aired up to nice high pressures, I can avoid a lot of flats. IMO, soft tires tend to pick up more debris, have a larger contact patch, and have more "give" if poked with something sharp, which invites sharp objects to get a foothold. Which is yet another reason I'm not a huge fan of the whole "run your 120 lb rated tires at 60 PSI" fad.
Last edited by Cyclist0108; 10-12-20 at 02:55 PM. Reason: How did I manage to mis-spell balloon not once, but twice?
#13
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,539
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 932 Post(s)
Liked 1,312 Times
in
491 Posts
In answer to the OP and as alluded to by several, the air-loss properties depend on tube type (fastest to slowest loss would be latex, ultralight, regular, heavy duty), and pressure (high pressure loses faster). On my most commonly used bike, running 32 mm tires, ultralight tubes and about 70 psi, I only need to pump it up about once every two weeks.
Last edited by davester; 10-12-20 at 02:34 PM.
#14
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,442
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 641 Times
in
407 Posts
I am not certain that that analogy, ahem, holds air.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#15
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
I don't know how I managed to mangle the spelling of balloon twice, but it is a bit more than an analogy.
Low-pressure tires, especially supple ones like Rene Herse, measurably deform around objects that more highly-inflated tires ping off of (or get stabbed by).
When I first started riding them, I assumed they would be a nightmare in terms of puncture resistance, since they don't have kevlar belts and stuff that I previously thought was a necessity for riding the streets of America. But I hardly ever get punctures (and the two I did get were pinch-flats). It really does work.
Low-pressure tires, especially supple ones like Rene Herse, measurably deform around objects that more highly-inflated tires ping off of (or get stabbed by).
When I first started riding them, I assumed they would be a nightmare in terms of puncture resistance, since they don't have kevlar belts and stuff that I previously thought was a necessity for riding the streets of America. But I hardly ever get punctures (and the two I did get were pinch-flats). It really does work.
#17
Senior Member
Thread Starter
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,142
Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 677 Post(s)
Liked 460 Times
in
182 Posts
#18
Senior Member
Join Date: Dec 2005
Posts: 17,160
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,716 Times
in
2,613 Posts
Shrinkage happens!
#20
Senior Member
Join Date: Jan 2016
Posts: 3,453
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 2,296 Times
in
1,283 Posts
I check and usually add whenever I ride because i have more than one bike and rotate with reckless abandon. I can't remember which one I rode last unless I check my Strava. So sometimes a bike may have been siting for 2 weeks without riding. I routinely check the tires before I take off for a ride for thorns or damage. Better to find it on the stand than out in the middle of nowhere sweating and changing a tube.
#21
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,056
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,805 Times
in
1,409 Posts
Likes For iab:
#22
Senior Member
Mine also will lose some pressure between rides. I always check my tires before a ride. Both road and mountain. But I'm religious about checking my road tires. Not as festidious with my mtb tires, but still check them regularly, at least every other ride. And I find I have to top them off each time.