Vintage Gravel Grinders
08-24-20, 02:15 PM
#1
Senior Member
Thread Starter
Vintage Gravel Grinders
As if there’s really such a thing. But let’s play along. Anyone care to post a pic of there bikes? Honestly, I think a Schwann Varsity with knobby tires is probably the ultimate vintage version.
08-24-20, 02:20 PM
#2
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 1,865
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1974 Allegro No. 76, 1973 Raleigh Competition, 1973 Raleigh GS, 1971 Gitane Tour de France and others
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 826 Times
in
444 Posts
Likes For rustystrings61:
08-24-20, 02:22 PM
#3
Senior Member
The ultimate vintage version would be one of the wide-tired pass-hunting machines from the high-end French framebuilders of the 40s, 50s, 60s, and 70s. The constructeurs were some of the few framebuilders making bicycles that take wide tires (650b) and wide gear ranges that were also very lightweight and sporty, meant for racing through the French Alps. They are probably the closest analogues to the modern gravel bike.
Last edited by TenGrainBread; 08-24-20 at 02:25 PM.
Likes For TenGrainBread:
08-24-20, 02:27 PM
#4
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 1,865
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1974 Allegro No. 76, 1973 Raleigh Competition, 1973 Raleigh GS, 1971 Gitane Tour de France and others
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 826 Times
in
444 Posts
And then there's this one of mine - '73 Raleigh Competition Mk. II running 42/44T chainrings against a Surly Dingle 17/19T fixed cogset on 35 mm Continental Cyclocross tires -
Likes For rustystrings61:
Likes For Sluggo:
08-24-20, 02:53 PM
#6
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,138
Bikes: '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 224 Post(s)
Liked 293 Times
in
176 Posts
All bikes are gravel bikes...
...well at least most tourish.
Likes For mechanicmatt:
Likes For clubman:
08-24-20, 03:06 PM
#8
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,415
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Motobecane(2), Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 537 Post(s)
Likes: 0
Liked 451 Times
in
222 Posts
These are my designated gravel bikes
Dirty Bike by L Travers, on Flickr
Katy Machens 23 mi 2 res by L Travers, on Flickr
Dirty Bike by L Travers, on FlickrKaty Machens 23 mi 2 res by L Travers, on Flickr
Likes For CV-6:
08-24-20, 03:10 PM
#9
Senior Member
Join Date: Dec 2005
Posts: 15,536
Mentioned: 394 Post(s)
Tagged: 0 Thread(s)
Quoted: 2886 Post(s)
Liked 3,457 Times
in
1,573 Posts
Likes For nlerner:
Likes For iab:
Likes For iab:
Likes For iab:
08-24-20, 04:26 PM
#13
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 8,359
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 118 Post(s)
Tagged: 0 Thread(s)
Quoted: 1207 Post(s)
Liked 697 Times
in
490 Posts
This one is almost entirely original, early-90's Performance Parabola "Road Hybrid". Bought a pair of them from Goodwill for $80 about 15 years ago.
It uses huge dual-pivot calipers with cable-release QR arrangement to accommodate huge tires. Tange Infinity DB CrMo tubing and unicrown fork w/1" steerer.
I used it for lots of mtb trail riding and a half-dozen CX races over the years.
Also bought, rode and raced this one from around the same time:
My current all-round road/gravel bike is this 1977 Pro-Tour, which gets by using Pasela tires maesuring only 26mm wide:
Then versus now, six months of abuse on said 1" Paselas:
It uses huge dual-pivot calipers with cable-release QR arrangement to accommodate huge tires. Tange Infinity DB CrMo tubing and unicrown fork w/1" steerer.
I used it for lots of mtb trail riding and a half-dozen CX races over the years.
Also bought, rode and raced this one from around the same time:
My current all-round road/gravel bike is this 1977 Pro-Tour, which gets by using Pasela tires maesuring only 26mm wide:
Then versus now, six months of abuse on said 1" Paselas:
Last edited by dddd; 08-24-20 at 05:01 PM.
08-24-20, 04:50 PM
#14
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 3,840
Bikes: Indeed!
Mentioned: 79 Post(s)
Tagged: 0 Thread(s)
Quoted: 1138 Post(s)
Liked 1,797 Times
in
644 Posts
Motobecane Le Champion
Some sort of Diamondback hybrid (I think.)
Carré Lejeune
Brent
Likes For obrentharris:
08-24-20, 05:00 PM
#15
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,177
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 1210 Post(s)
Likes: 0
Liked 1,203 Times
in
706 Posts
I keep this early eighties Bianchi Touring in Jamaica and, generally, put about 3000km on the bike each winter. Did not do that this years, though, as I had to leave the island six weeks ahead of schedule. Anyway, what a great, solid, dependable and ugly old bike. I love it..!
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
08-24-20, 05:04 PM
#16
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 19,300
Bikes: A bunch of old bikes and a few new ones
Mentioned: 168 Post(s)
Tagged: 0 Thread(s)
Quoted: 5420 Post(s)
Liked 2,232 Times
in
1,444 Posts
Originally Posted by Sluggo
Everybody rode on gravel until the '60s or '70s.
This is Anquetil and Bahamontes, TDF 1963.
This is Anquetil and Bahamontes, TDF 1963.
Last edited by bikemig; 08-24-20 at 05:09 PM.
Likes For bikemig:
08-24-20, 05:15 PM
#17
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 19,300
Bikes: A bunch of old bikes and a few new ones
Mentioned: 168 Post(s)
Tagged: 0 Thread(s)
Quoted: 5420 Post(s)
Liked 2,232 Times
in
1,444 Posts
Bridgestone, Bianchi, and GT
Before gravel bikes became a thing, they reminded me a lot of the the early days of MTBs. Old bikes were repurposed to handle gravel and it was a way of avoiding cars.
Vintage MTBs obviously make good gravel grinders. There are also some bikes that pushed the design envelope: the Bridgestone XO series (many of these had road geometry with 26 inch wheels), the Bianchi project bikes that were early forerunners of the 29ers, and the GT Tachyon bikes.
Here is a good piece on the Bianchi Project and GT tachyon bikes
https://www.bikehugger.com/posts/the...at-wasnt-700d/
I have a 1992 Bridgestone XO 2. The bike is a great gravel and all around bike with plush 26 inch tires and road geometry:
Vintage MTBs obviously make good gravel grinders. There are also some bikes that pushed the design envelope: the Bridgestone XO series (many of these had road geometry with 26 inch wheels), the Bianchi project bikes that were early forerunners of the 29ers, and the GT Tachyon bikes.
Here is a good piece on the Bianchi Project and GT tachyon bikes
https://www.bikehugger.com/posts/the...at-wasnt-700d/
I have a 1992 Bridgestone XO 2. The bike is a great gravel and all around bike with plush 26 inch tires and road geometry:
Last edited by bikemig; 08-24-20 at 05:28 PM.
Likes For bikemig:
08-24-20, 06:34 PM
#18
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 2,891
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Liked 254 Times
in
177 Posts
Originally Posted by dddd
This one is almost entirely original, early-90's Performance Parabola "Road Hybrid". Bought a pair of them from Goodwill for $80 about 15 years ago.
It uses huge dual-pivot calipers with cable-release QR arrangement to accommodate huge tires. Tange Infinity DB CrMo tubing and unicrown fork w/1" steerer.
I used it for lots of mtb trail riding and a half-dozen CX races over the years.
It uses huge dual-pivot calipers with cable-release QR arrangement to accommodate huge tires. Tange Infinity DB CrMo tubing and unicrown fork w/1" steerer.
I used it for lots of mtb trail riding and a half-dozen CX races over the years.
1992 Performance Parabola
The aforementioned brakes with 28 mm tires. I mounted fenders over 32mm tires with room to spare.
08-24-20, 06:51 PM
#19
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 1,770
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,065 Times
in
573 Posts
For the budget-minded, a lot of these '80s tourers make great gravel bikes!
But I'll give a plug for Jack Taylor's work as well. He was making purpose-built mountain bikes for his customers while Gary Fisher was still messing about with old Schwinns! And I still take this old '59 Taylor tandem on gravel.
But I'll give a plug for Jack Taylor's work as well. He was making purpose-built mountain bikes for his customers while Gary Fisher was still messing about with old Schwinns! And I still take this old '59 Taylor tandem on gravel.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
08-24-20, 07:37 PM
#20
Senior Member
Join Date: Jun 2006
Posts: 17,255
Mentioned: 113 Post(s)
Tagged: 0 Thread(s)
Quoted: 2340 Post(s)
Liked 1,260 Times
in
949 Posts
Originally Posted by iab
The shift paddle on the LH side just an artifact?
08-24-20, 08:00 PM
#21
Senior Member
Originally Posted by repechage
I am not a proponent of single ring, but this looks well planned.
The shift paddle on the LH side just an artifact?
The shift paddle on the LH side just an artifact?
Likes For iab:
08-24-20, 08:20 PM
#22
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,066
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 PeugeotPX-10, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 81 Post(s)
Tagged: 0 Thread(s)
Quoted: 625 Post(s)
Liked 1,250 Times
in
515 Posts
My Mark I happily eats dirt all day.
Paused at Hastings-On-Hudson
Paused at Hastings-On-Hudson
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1972 Raleigh Super Course, 1971 Philips Sport
08-24-20, 08:53 PM
#23
small ring
Join Date: Jul 2012
Location: PNW
Posts: 828
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 506 Times
in
240 Posts
Univega is for shorter rides 700x38, Rockhopper is for longer self supported rides, usually has a rack on the back, 26x2.0
__________________
08-25-20, 09:01 AM
#24
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 19,300
Bikes: A bunch of old bikes and a few new ones
Mentioned: 168 Post(s)
Tagged: 0 Thread(s)
Quoted: 5420 Post(s)
Liked 2,232 Times
in
1,444 Posts
Originally Posted by cs1
As if there’s really such a thing. But let’s play along. Anyone care to post a pic of there bikes? Honestly, I think a Schwann Varsity with knobby tires is probably the ultimate vintage version.
But what about a Schwinn Excelsior Klunker?
Schwinn Excelsior Klunker
That would make a cool vintage gravel bike.
Likes For bikemig:
08-25-20, 09:08 AM
#25
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 19,300
Bikes: A bunch of old bikes and a few new ones
Mentioned: 168 Post(s)
Tagged: 0 Thread(s)
Quoted: 5420 Post(s)
Liked 2,232 Times
in
1,444 Posts
Originally Posted by droppedandlost
Univega is for shorter rides 700x38, Rockhopper is for longer self supported rides, usually has a rack on the back, 26x2.0
How the heck did you get 38c tires mounted on the univega? Just asking because not a lot of road bikes can handle a 38c which is one reason why 650b has become popular.
I started a thread on this a while back:
https://www.bikeforums.net/classic-v...tage-bike.html
