Need rack suggestions for Raleigh rebuild
#1
bill nyecycles
Thread Starter
Join Date: Mar 2013
Location: Houston TX
Posts: 3,328
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 789 Post(s)
Liked 350 Times
in
190 Posts
Need rack suggestions for Raleigh rebuild
I'm reaching the end of my rebuild and am looking for a nice rear rack - one that's both useful utility-wise, but also fitting for the era/look of the bike.
My first pick is a Portland Design Works Payload rack, and it's probably what I'll go with but I wanted some other input & ideas because who knows what else is out there...
https://ridepdw.com/products/payload...nt=24749204929
I'll be commuting with an Arkel Tailrider trunk bag, so I'm looking for something with a decent platform to support it (also future hauling things): https://www.arkel-od.com/en/tailride...-rack-bag.html
But I am open to other ideas for racks.
I'm looking to stay under $100 in price (so no Tubus rec's please). It will need to be P-clamp compatible (I don't like how the single arm brake attachment looks & there are no rack mounts on the seat stays).
I already have a Topeak Explorer rack that I used to use on my old MTB when I had it as a commuter but I was looking for something a little more....elegant?
I also have the original rack that came stock on a 1974 Raleigh Sprite - which is period correct, lol, but not very pretty, and lacks support legs to hook panniers to.
Here's what the bike looks like currently to help stir your brains. Thanks for any input!
My first pick is a Portland Design Works Payload rack, and it's probably what I'll go with but I wanted some other input & ideas because who knows what else is out there...
https://ridepdw.com/products/payload...nt=24749204929
I'll be commuting with an Arkel Tailrider trunk bag, so I'm looking for something with a decent platform to support it (also future hauling things): https://www.arkel-od.com/en/tailride...-rack-bag.html
But I am open to other ideas for racks.
I'm looking to stay under $100 in price (so no Tubus rec's please). It will need to be P-clamp compatible (I don't like how the single arm brake attachment looks & there are no rack mounts on the seat stays).
I already have a Topeak Explorer rack that I used to use on my old MTB when I had it as a commuter but I was looking for something a little more....elegant?
I also have the original rack that came stock on a 1974 Raleigh Sprite - which is period correct, lol, but not very pretty, and lacks support legs to hook panniers to.
Here's what the bike looks like currently to help stir your brains. Thanks for any input!
#2
Senior Member
Consider Pletscher. It's about the same price as the Portland rack. https://www.rivbike.com/collections/...cher-clem-rack
The original Pletschers were pretty wimpy and had only one pair of stays, but really they were the only racks around when your Raleigh was new. The new version is much improved since now has two pairs of stays, but it retains its vintage looks. The mousetrap was great for holding your brown paper bag lunch...
The original Pletschers were pretty wimpy and had only one pair of stays, but really they were the only racks around when your Raleigh was new. The new version is much improved since now has two pairs of stays, but it retains its vintage looks. The mousetrap was great for holding your brown paper bag lunch...
#4
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
If you have a co-op near they can be a good source for vintage racks. I have a blackburn that came on my 78 Motobecane GT that has a rack that mounts in behind the brake and since you don't have any rack braze-ons that might work and the rack stays could mount to your fender eyelets. It looks like this
#5
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,331
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 886 Post(s)
Liked 998 Times
in
525 Posts
I am looking at a Wald Rack for my Raleigh Gran Sport
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
#6
Senior Member
Elegance + Trunk Bag (or small panniers)
Bet you could make this work...
It's a Wald rack trimmed back using a Dremel.
Project is by BF member "steppinthefunk"...
It's a Wald rack trimmed back using a Dremel.
Project is by BF member "steppinthefunk"...
Last edited by chainwhip; 06-07-19 at 09:26 AM.
#7
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,878
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Probably the two most common racks from my old days ('60s) are the Blackburn and the Pletcher with mousetrap. Prior to those there were steel racks by Wald and others on the market. Tubus is popular today and has been for at least 15 years, but more pricey, and not neessarily light.
#8
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
I have a few excess racks - in particular a Blackburn and a Cyclepro that have some wear, but are sound, and not eyesores - that would look right at home on that sweet Super-Tourer. Once I resolve my Flickr account issue, I'll send a PM.
__________________
In search of what to search for.
In search of what to search for.
#9
bill nyecycles
Thread Starter
Join Date: Mar 2013
Location: Houston TX
Posts: 3,328
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 789 Post(s)
Liked 350 Times
in
190 Posts
Consider Pletscher. It's about the same price as the Portland rack. https://www.rivbike.com/collections/...cher-clem-rack
The original Pletschers were pretty wimpy and had only one pair of stays, but really they were the only racks around when your Raleigh was new. The new version is much improved since now has two pairs of stays, but it retains its vintage looks. The mousetrap was great for holding your brown paper bag lunch...
The original Pletschers were pretty wimpy and had only one pair of stays, but really they were the only racks around when your Raleigh was new. The new version is much improved since now has two pairs of stays, but it retains its vintage looks. The mousetrap was great for holding your brown paper bag lunch...
Keep the suggestions comin!
Likes For tyrion:
#11
Senior Member
My guess is you chose style over function in picking that rack.
I like the wood insert but it won't last, especially if it ever gets wet. It will prevent soft things from protruding down onto the wheel, so that's good.
Get rid if the "swoopy" rack stays.
I think the black will go very well with the bike's color scheme.
I like the wood insert but it won't last, especially if it ever gets wet. It will prevent soft things from protruding down onto the wheel, so that's good.
Get rid if the "swoopy" rack stays.
I think the black will go very well with the bike's color scheme.
#12
Senior Member