11 speed chain on 7 speed drive
#1
Newbie
Thread Starter
Join Date: May 2015
Location: New Jersey
Posts: 39
Bikes: Wilier GTR SL, Wilier Jena Hybrid ebike, Cannondale Scalpel
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 0 Times
in
0 Posts
11 speed chain on 7 speed drive
I was asked to install new 7 speed twist shifters on my friends Specialized Crossroads 3x7 hybrid bike. The chain looks all gunked up but seems to shift fairly well front and back with the new shifters. I have a low use clean11 speed chain laying around and was wondering if the narrowness of the 11 speed chain would be too much for it to engage the front rings and the rear 7 speed cassette.
#2
Senior Member
Join Date: Dec 2008
Location: Pioneer Valley
Posts: 1,048
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 777 Times
in
402 Posts
It would fit the teeth of the chainrings but shifting would probably be sloppy due to its outer width. Why not just clean the current chain?
#3
Newbie
Thread Starter
Join Date: May 2015
Location: New Jersey
Posts: 39
Bikes: Wilier GTR SL, Wilier Jena Hybrid ebike, Cannondale Scalpel
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 0 Times
in
0 Posts
Yea, makes sense. I'll pop the pin, pull off the chain and soak it in some gas. It's really thick gunk and will need some scrubbing after soaking. Just thought getting use of a spare chain laying around.
#7
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,025
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 320 Post(s)
Liked 860 Times
in
450 Posts
clean/soak chain with kerosene. it's a cleaner and a lube in one. You can get small bottles of kerosene in sports aisle at Walmart.
#8
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,525
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2750 Post(s)
Liked 3,407 Times
in
2,062 Posts
#9
Newbie
Thread Starter
Join Date: May 2015
Location: New Jersey
Posts: 39
Bikes: Wilier GTR SL, Wilier Jena Hybrid ebike, Cannondale Scalpel
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 0 Times
in
0 Posts
I ended up using a heavy duty degreaser sprayed on to a rag and wiped the gung off the chain. My buddy will think the chain was soaked but it looks pretty good with min. effort. Really good link to different chain specks. Thanks for the info.
#10
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,614
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4403 Post(s)
Liked 4,036 Times
in
2,693 Posts
Probably could use a new chain and cassette or freewheel. If it is that dirty and gunked up the whole thing could probably use replacement and the rest of the drivetrain could use a good cleaning. With 8 speed chains being quite cheap I see no reason to use the wrong chain.
Likes For veganbikes:
#11
jsallen
The important part of the chain to clean and relubricate is inside. Wiping dirt off the outside only makes it look better and can push grit inside.
Last edited by jsallen; 12-07-23 at 09:06 AM.
#12
Senior Member
Join Date: Mar 2012
Posts: 986
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 510 Post(s)
Likes: 0
Liked 643 Times
in
359 Posts
Now that you have externally cleaned the chain, take a measurement of its elongation (wear) by measuring the distance between the pins of 12" of chain. If the measurement is over 12 & 1/8 " then replace the chain. If the chain is not worn out, do a better clean by dripping solvent on the chain as you pedal the bike off the ground. The solvent will loosen all the internal gunk as you pedal. Wipe the chain and then repeat the process. At this point the chain will be pretty clean externally and more importantly, internally. Drip lube on the chain and pedal to make sure the lube gets worked in. Wipe, wipe, wipe to get the lube off the external parts of the chain.