Hubs identification
#1
Senior Member
Thread Starter
Join Date: May 2014
Location: Cleveland, Ohio
Posts: 2,122
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 243 Post(s)
Liked 172 Times
in
110 Posts
Hubs identification
Any idea of the maker?
There is nothing written on them.
You can use skewers also.
There is nothing written on them.
You can use skewers also.
__________________
1992 Torelli Nitro Express; 1972 Claud Butler.
1992 Torelli Nitro Express; 1972 Claud Butler.
Last edited by marius.suiram; 02-25-24 at 06:13 PM.
#2
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,866
Bikes: Too many to list here check my signature.
Mentioned: 193 Post(s)
Tagged: 2 Thread(s)
Quoted: 2935 Post(s)
Liked 2,930 Times
in
1,495 Posts
American Classic? Bullseye?
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#3
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
Hi-E
#4
Senior Member
Thread Starter
Join Date: May 2014
Location: Cleveland, Ohio
Posts: 2,122
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 243 Post(s)
Liked 172 Times
in
110 Posts
Looking at pictures online, I think they are Bullseye
__________________
1992 Torelli Nitro Express; 1972 Claud Butler.
1992 Torelli Nitro Express; 1972 Claud Butler.
#5
Disciple of St. Tullio
Join Date: Jul 2008
Location: State of Jefferson
Posts: 743
Bikes: Ciöcc, Bianchi, DeRosa, Eddy Merckx, Frejus, Hampsten, Kondor, Losa, Magni, Pegoretti, Pelizzoli, Pogliaghi, Scapin
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 334 Times
in
140 Posts
They look like Bullseye to me as well. Bullseye hubs are awesome, they roll better than any other hub that I've ever owned.
They came with the allen head screw in the axle, though you can remove it and use quick-releases. Note that the allens and the set screws on the end spacers are SAE rather than metric.
They came with the allen head screw in the axle, though you can remove it and use quick-releases. Note that the allens and the set screws on the end spacers are SAE rather than metric.
Likes For Choke:
Likes For Mr. 66:
#7
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,478
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,377 Times
in
1,581 Posts
I'm voting Bullseye, mostly based on the internal threads at the ends of the axle. This is something that Hi-E never did. Not sure about whether anyone else did internal threads.
I've owned a Bullseye rear hub and thought it was pretty nice! It was possible to change out the axle to go from 126mm to 135. I only got rid of it because I was changing from freewheel to cassette on this bike.
pics of my hub:
... and some of Bullseye's literature about the hubs...
edit: If you want to bolt the axle in place, take note that the threading is imperial and not metric! I think this was because it was designed for the domestic BMX market initially.
Steve in Peoria
I've owned a Bullseye rear hub and thought it was pretty nice! It was possible to change out the axle to go from 126mm to 135. I only got rid of it because I was changing from freewheel to cassette on this bike.
pics of my hub:
... and some of Bullseye's literature about the hubs...
edit: If you want to bolt the axle in place, take note that the threading is imperial and not metric! I think this was because it was designed for the domestic BMX market initially.
Steve in Peoria
Likes For steelbikeguy:
Likes For rando_couche: