Dropout Alignment Tools
#1
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,798
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3515 Post(s)
Liked 2,929 Times
in
1,777 Posts
Dropout Alignment Tools
Picked up a pair of Cyclus Dropout Alignment Tools for about $32 bucks. They appear to be shop quality, with nicely machined surfaces and deep knurling. Most of the tool is blackened steel--almost like a gun blue.
Knowing the Campy versions of the same tool can cost over $200 bucks, these seem like a steal. Even the Park versions are over $100. Got them on-line from a shop in Germany called Bike24.
Dropout Alignment Tools
Knowing the Campy versions of the same tool can cost over $200 bucks, these seem like a steal. Even the Park versions are over $100. Got them on-line from a shop in Germany called Bike24.
Dropout Alignment Tools
Likes For smd4:
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,100
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4212 Post(s)
Liked 3,883 Times
in
2,318 Posts
As with any tool the manor od handling and applying the tool is more important than its cost. I have three different DO tool brands in my basement. All are good at what they do. My friends drool over the Campy ones. I more often reach for the Cyclus or the Steins though. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,558
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4367 Post(s)
Liked 4,006 Times
in
2,675 Posts
Cyclus makes some decent tools, I really want a Radonaut (which I mentioned in a thread a while back) and if I needed alignment tools I might pick up a set of those but I simply would just bring my bike to work and do it there. I don't really have the want to do it at the house and collect more tools when I have other tools I want and more bike parts I "need".
#5
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,798
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3515 Post(s)
Liked 2,929 Times
in
1,777 Posts
I guess I’m sort of a tool junkie. I like being able to do almost everything on my bike. I’d never heard of Cyclus until I found these alignment tools, and was impressed by the price. Even more impressed with their quality.
Likes For smd4:
#6
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
I never heard of Cyclus ether, and was looking at their tool offerings. I'm trying really hard to think what tool I need. From the few comments on this post, they seem to be a quality product.
#7
Senior Member
I have a bunch of Cyclus tools. Mostly facers and reamers for frame prep. They were the most affordable and have worked well for me.
As far as dropout alignment tools, I owned both Campy and Park versions. I'm a Campy man and hate to admit this, but I found the Park ones were easier to use. I sold off the Campy tool.
As far as dropout alignment tools, I owned both Campy and Park versions. I'm a Campy man and hate to admit this, but I found the Park ones were easier to use. I sold off the Campy tool.