.STL or .OBJ file for a F25 or F33 Quick Click
#1
Senior Member
Thread Starter
Join Date: Oct 2013
Location: Mich
Posts: 7,391
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,972 Times
in
1,918 Posts
.STL or .OBJ file for a F25 or F33 Quick Click
Does anyone have any renderings of the F25 or F33 Quick Click wedge pack fixer Inner Mount?
Nothing is off the shelf ready to procure & I haven't ran across much that modifies the part that mounts to the seat {or seat post} . Basically am after a wedge pack quick click fixer 1" thick 2.5"ish long 2"ish wide rectangular block with a thru-hole for a bolt in the center. Don't want any degrees to it & the back side has to be flat across.
Nothing is off the shelf ready to procure & I haven't ran across much that modifies the part that mounts to the seat {or seat post} . Basically am after a wedge pack quick click fixer 1" thick 2.5"ish long 2"ish wide rectangular block with a thru-hole for a bolt in the center. Don't want any degrees to it & the back side has to be flat across.
__________________
-Oh Hey!
-Oh Hey!
#2
Senior Member
Thread Starter
Join Date: Oct 2013
Location: Mich
Posts: 7,391
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,972 Times
in
1,918 Posts
trying to make this: (in red)
__________________
-Oh Hey!
-Oh Hey!