Shimano 105 32hole hub and Hyperglide 13-21 7sp
#1
Senior Member
Thread Starter
Join Date: Feb 2020
Posts: 2,820
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,328 Times
in
784 Posts
Shimano 105 32hole hub and Hyperglide 13-21 7sp
These are like new, but I know they are not because I unlaced them; the wheel was unused, rim shows no brake marks, the hub shows no marks from the cassette and the cassette has *not* been cleaned - the pics show why.
$30 each and I'll pay postage in NA
OR
$55 the pair postage as above
OR
trade either one for a Campy Triomphe left arm 170mm
OR
trade both for a Campy Record HF 36hole rear hub - decent user quality will do.
$30 each and I'll pay postage in NA
OR
$55 the pair postage as above
OR
trade either one for a Campy Triomphe left arm 170mm
OR
trade both for a Campy Record HF 36hole rear hub - decent user quality will do.
#3
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
It's good stuff. If I didn't already have a stash of these exact parts, I might have bit. GLWS!
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 03-19-21 at 09:40 PM.
#4
Junior Member
Join Date: Feb 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm interested, but I'm not convinced that the 1st position cog and lockring pictured are meant for this particular Hyperglide/Uniglide hub. All the H/U hubs that I'm familiar with have an integrated lockring with the first position cog, meant to thread onto the external part of the cassette, and you can see that external threading on the end of your cassette. What you have in your picture looks to me like a 1st position cog and separate lockring from a modern cassette (in this case, lockring would thread on the INSIDE of the cassette), and would not be compatible with the pictured hub. If you can include a picture of the entire cassette assembled and locked into place on the hub, that would change my mind. Thanks!
#5
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
I'm interested, but I'm not convinced that the 1st position cog and lockring pictured are meant for this particular Hyperglide/Uniglide hub. All the H/U hubs that I'm familiar with have an integrated lockring with the first position cog, meant to thread onto the external part of the cassette, and you can see that external threading on the end of your cassette. What you have in your picture looks to me like a 1st position cog and separate lockring from a modern cassette (in this case, lockring would thread on the INSIDE of the cassette), and would not be compatible with the pictured hub. If you can include a picture of the entire cassette assembled and locked into place on the hub, that would change my mind. Thanks!
#6
Senior Member
Join Date: Aug 2009
Posts: 2,394
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1562 Post(s)
Liked 1,734 Times
in
974 Posts
I'm interested, but I'm not convinced that the 1st position cog and lockring pictured are meant for this particular Hyperglide/Uniglide hub. All the H/U hubs that I'm familiar with have an integrated lockring with the first position cog, meant to thread onto the external part of the cassette, and you can see that external threading on the end of your cassette. What you have in your picture looks to me like a 1st position cog and separate lockring from a modern cassette (in this case, lockring would thread on the INSIDE of the cassette), and would not be compatible with the pictured hub. If you can include a picture of the entire cassette assembled and locked into place on the hub, that would change my mind. Thanks!
Likes For icemilkcoffee:
#7
Senior Member
Thread Starter
Join Date: Feb 2020
Posts: 2,820
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,328 Times
in
784 Posts
I'm interested, but I'm not convinced that the 1st position cog and lockring pictured are meant for this particular Hyperglide/Uniglide hub. All the H/U hubs that I'm familiar with have an integrated lockring with the first position cog, meant to thread onto the external part of the cassette, and you can see that external threading on the end of your cassette. What you have in your picture looks to me like a 1st position cog and separate lockring from a modern cassette (in this case, lockring would thread on the INSIDE of the cassette), and would not be compatible with the pictured hub. If you can include a picture of the entire cassette assembled and locked into place on the hub, that would change my mind. Thanks!
#8
Junior Member
Join Date: Feb 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Great, thanks for including that pic. I'll take it, but since I'm an newbie I can't PM you. Can you get a hold of me and let me know how to send payment? Thanks
#12
Catching Smallmouth
Join Date: Oct 2013
Location: In a boat
Posts: 590
Bikes: 1990 Specialized Sirrus Triple, 1985 Trek 460, 2005 Lemond Tourmalet, 1984 Schwinn LeTour 'Luxe, 1988 Trek 400T, 1985 Trek 450, 1997 Lemond Zurich, 1993 Diamond Back Apex, 1988 Schwinn Circuit, 1988 Schwinn Prologue, 1978 Trek TX700, Sannino
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 88 Post(s)
Liked 134 Times
in
79 Posts