Sports drink and water bottle cleaning ritual?
#1
Junior Member
Thread Starter
Sports drink and water bottle cleaning ritual?
I used to drink just plain water. But at some point, I started using sports drinks (Gatorade etc), which I like. However, those seems a perfect medium for bacteria growth!
I've been caught a few times when I came home late or tired, and forgot to clean the bottle. The next day? It was yucky!
Now, I do my best to rinse the bottle out as soon as I get home. But recently, I discovered "stuff" growing in the drinking spout! Upon closer examination, "stuff" are also found in area not easily reached, e.g. around the curvy narrow part of the bottle where the cage grabs the bottle... Needless to say, I didn't clean my bottle as thoroughly as I should have.
For those of you who use sports drinks, what do you do to clean your bottle?
And, if you're the absent minded kind like me, what's your best "rescue plan" to clean up bottles that got over-populated by sports drink fed bacteria?
I've been caught a few times when I came home late or tired, and forgot to clean the bottle. The next day? It was yucky!
Now, I do my best to rinse the bottle out as soon as I get home. But recently, I discovered "stuff" growing in the drinking spout! Upon closer examination, "stuff" are also found in area not easily reached, e.g. around the curvy narrow part of the bottle where the cage grabs the bottle... Needless to say, I didn't clean my bottle as thoroughly as I should have.
For those of you who use sports drinks, what do you do to clean your bottle?
And, if you're the absent minded kind like me, what's your best "rescue plan" to clean up bottles that got over-populated by sports drink fed bacteria?
#2
Senior Member
hot water and soap, rinse and store in the freezer when not in use
Likes For Bolo Grubb:
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,546
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,435 Times
in
2,761 Posts
Dishwasher
Likes For shelbyfv:
#4
Junior Member
Thread Starter
I found dishwasher most disappointing.
It doesn't reach the part beyond the neck (the narrow part of the bottle). The backside of that part didn't get cleaned at all.
It's only when the bottle was dirty (because I forgot to clean it immediately) that I can actually SEE which part of the bottle did or didn't get cleaned.
It doesn't reach the part beyond the neck (the narrow part of the bottle). The backside of that part didn't get cleaned at all.
It's only when the bottle was dirty (because I forgot to clean it immediately) that I can actually SEE which part of the bottle did or didn't get cleaned.
#6
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,180
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 867 Post(s)
Liked 1,205 Times
in
694 Posts
I buy cheap bottles.
scalding water and bottle brush with dishsoap.
Any bottle doesn’t make the grade, even a little suspect gets tossed.
I buy cheap bottles. $2.78ea
Barry
scalding water and bottle brush with dishsoap.
Any bottle doesn’t make the grade, even a little suspect gets tossed.
I buy cheap bottles. $2.78ea
Barry
Last edited by Barry2; 09-27-21 at 05:14 PM. Reason: Added link
Likes For Barry2:
#7
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
I've got some Camelback bottles and you can take the spouts completely apart - I'll do that every once in a while, and give the parts an overnight soak in water with a tbsp of bleach, or so. It helps a lot, and would not buy any new bottles if the spouts couldn't be disassembled, cleaned and reassembled.
Preventative maintenance goes a long way, though. Yes, rinse as soon as possible. Another thing that I'll do is contain the funk somewhat by assigning bottles for sports drink duty... like, for the lifetime of the bottle. Those not assigned to sports drink duty get water only - this keeps them from getting as funky. When I head out on a ride, I'll grab one of each bottle.
Preventative maintenance goes a long way, though. Yes, rinse as soon as possible. Another thing that I'll do is contain the funk somewhat by assigning bottles for sports drink duty... like, for the lifetime of the bottle. Those not assigned to sports drink duty get water only - this keeps them from getting as funky. When I head out on a ride, I'll grab one of each bottle.
Likes For WhyFi:
#8
Senior Member
Join Date: Feb 2007
Posts: 1,440
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 625 Post(s)
Likes: 0
Liked 397 Times
in
275 Posts
I have clean canteen bottles. I use metal lids on them no drink spout. I use them to refill my Camelbak. I only use the little water bottle to mix drinks and only water in everything else. hot or boiling water and soap for cleaning.
#9
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,222
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2584 Post(s)
Liked 5,642 Times
in
2,922 Posts
Have a Bosch dishwasher and it cleans even the tall bottles really well.
1. Unscrew lid and place on upper tray
2. Place bottle with glassware
3. Push button
1. Unscrew lid and place on upper tray
2. Place bottle with glassware
3. Push button
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#10
cycles per second
Join Date: Oct 2003
Location: Minnesota
Posts: 1,930
Bikes: Early 1980's Ishiwata 022 steel sport/touring, 1986 Vitus 979, 1988 DiamondBack Apex, 1997 Softride PowerWing 700, 2001 Trek OCLV 110
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 71 Times
in
48 Posts
Hot soapy water and bottle brush for the bottles, and toothbrush for the caps.
#11
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Baby bottle brush for quick cleaning. I'll fill 'em with hot water and a little Dawn or other dish soap, shake 'em up, squirt the soapy water through the lid several times, then rinse.
As noted above, Camelbak lids with one-way valves can be disassembled for thorough cleaning. Reminds me, mine are overdue for disassembly and cleaning. After awhile they'll develop mold, despite the plastic being designed to resist buildup of bacteria, mold, etc.
As noted above, Camelbak lids with one-way valves can be disassembled for thorough cleaning. Reminds me, mine are overdue for disassembly and cleaning. After awhile they'll develop mold, despite the plastic being designed to resist buildup of bacteria, mold, etc.
#12
Junior Member
I put a table spoon of rice, tiny drip of soap and a little water into bottle. Shake bottle to scrub the inside clean. Dump rice in trash, and rince out bottle to remove soap. I do this if a bottle grows mold, or about once a month even if it looks clean.
#14
Senior Member
Join Date: May 2021
Posts: 8,438
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,864 Times
in
3,010 Posts
I use those baby bottle sterilising tablets (Milton). Not every wash, but once I start seeing signs of mould growing.
#15
Junior Member
Bottles and lids go in the dishwasher. As for hydration bladders, hot soapy water, multiple rinses and we store them empty in the freezer.
Off topic but related: If you have a chest freezer with enough space and return from a camping trip with wet gear and no time or space to immediately dry it out, freeze it until you can properly deal with it.
Off topic but related: If you have a chest freezer with enough space and return from a camping trip with wet gear and no time or space to immediately dry it out, freeze it until you can properly deal with it.
#16
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6195 Post(s)
Liked 4,810 Times
in
3,318 Posts
I rinse mine out soon after I get home. Also use a bottle brush on them. My bottles are just 25 fl oz Monster Energy drink bottles that I bought at a convenience store and emptied the contents which I don't care for. Every blue moon or two I might add a little chlorine bleach or Oxyclean if I ever spot any thing that looks like life inside.
On Camelback bottles, same thing. However they more often need to have the nipple pulled off and taken apart. Mold or mildew seems to like getting up in there and growing. Bleach and a small brush get it cleaned out then after drying, reassembled.
On Camelback bottles, same thing. However they more often need to have the nipple pulled off and taken apart. Mold or mildew seems to like getting up in there and growing. Bleach and a small brush get it cleaned out then after drying, reassembled.
#17
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
TBH, this is why I only put water in water bottles. Yes, they can be cleaned, but it's a PITA. Any sugar water is a perfect growth medium for all sorts of things. If your soda from a fountain has an off-taste, do not drink it! They're probably not cleaning the system properly, and I've seen the crap that can grow in those nozzles.
#19
Senior Member
Join Date: Oct 2013
Location: Highlands Ranch, CO
Posts: 1,221
Bikes: '13 Diamondback Hybrid Commuter, '17 Spec Roubaix Di2, '17 Spec Camber 29'er, '19 CDale Topstone Gravel
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 590 Post(s)
Liked 445 Times
in
260 Posts
Dumb question, is the black stuff that grows in the spout actually bad for you? What is it technically (and don't just say mold), because I eat bleu cheese with mold in it and I'm still standing. How many others don't care a lot about a little crud in their bidon?
#20
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
There's a huge range and variety of mold - some can be bad for you, while others aren't. The stuff growing in your bottles hasn't exactly been hand-picked, so who knows what's growing in there. While I'm not terribly concerned about the health ramifications, I just think that black **** growing on my nozzles is gross and cleaner bottles taste better.
Likes For WhyFi:
#21
Junior Member
Thread Starter
I'm pretty sure the mold in bleu cheese came about because many ate their cheese with mold in it and one mold taste better than others. How many died from eating the wrong kind of mold? Hard to say. But who knows, perhaps we're survivors from Darwinism and can eat many molds with impunity! On the other hand, it only take one bad one to rake havoc in one body...
Likes For atnyc:
#22
Super-duper Genius
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 984 Times
in
508 Posts
TBH, this is why I only put water in water bottles. Yes, they can be cleaned, but it's a PITA. Any sugar water is a perfect growth medium for all sorts of things. If your soda from a fountain has an off-taste, do not drink it! They're probably not cleaning the system properly, and I've seen the crap that can grow in those nozzles.
Likes For Broctoon:
#23
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,637
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4736 Post(s)
Liked 1,532 Times
in
1,003 Posts
Sports drink with sugar is the primary problem. That's what gives bacteria/mold something to eat. Dishwasher only does so much, especially if you have bottle caps that are the variety that are leakproof while open and liquid only travels thru the nozzle when forced by squeezing. That obviously means that wash water will likely not get inside even in the dishwasher.
Basically I just empty when done with a ride. Hot sudsy dawn + water in the bottle and then squirt thru the cap to flush out anything in there remaining. Yes, being able to dismantle the nozzles for cleaning helps from time to time, but probably only do this once in every 10 rides' worth of usage.
Basically I just empty when done with a ride. Hot sudsy dawn + water in the bottle and then squirt thru the cap to flush out anything in there remaining. Yes, being able to dismantle the nozzles for cleaning helps from time to time, but probably only do this once in every 10 rides' worth of usage.
Likes For Sy Reene:
#24
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Bleu cheese mold is a very specific penicillium mold with very specific properties. If you're drinking through a bunch of slime, who the hell knows what molds and bacteria are in there? Keep in mind there's a bunch of random contaminants getting kicked up from the road or trail landing on that nozzle. Feel free to run your little experiment and consume "black stuff", what could go wrong?
#25
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
I'm pretty sure the mold in bleu cheese came about because many ate their cheese with mold in it and one mold taste better than others. How many died from eating the wrong kind of mold? Hard to say. But who knows, perhaps we're survivors from Darwinism and can eat many molds with impunity! On the other hand, it only take one bad one to rake havoc in one body...