oneclick 

Fitting a QR-less set of side-pulls, need a pair of levers with QR.

Trade/money/small parts made

unworthy1

Do you care which style QR (these could be a 1. flip sideways spring-loaded dealio which Schwinn often used in several colors of anno or 2. a flip-inward alloy casting and if you want to add Weinmann possibilities then there are also 3. "buttons")?
Also presuming NOT with turkey levers, correct?

strichzwei

ISO: Campagnolo 126mm skewer rod.
I did something stupid with my quick release (I dont want to talk about it) and snapped the rod, just need a replacement rod.
Scott

oneclick 

Don't care which kind, turkey levers I would remove and file flat the pivot - but without is better.

PhilFo 

ISO non-drive side Suntour Superbe Pro crankarm, 175mm.
Thanks all

unworthy1

OK I found a pair but should note when you wrote "DC" I was assuming them to be in the vintage "Weinmann" style and there's probably later models of levers made by DC that have some sort of QR.
With that said: what I found are a nice pair of classic Weinmann levers with the "flip-up" casting QR, red anno pivots and include the often-missing cable housing ferrules.
The blades have the subtle cross-hatching texture, no round hole or slot drillium.
Only thing is two different clamps: one is stamped "22" and the other "23.5" so if you go for these tell me which you want and I'm 97% sure I can fine another clamp to make a matched pair.
Let's talk trade-bait: what items are you thinking to off-load? I just solved my "fender mount hardware" needs (probably) so need to think about what I'm looking for, next.

mountaindave 

Do you have a picture of the skewer? I might have a whole QR skewer for you.

oneclick 

Obsessive-compulsive means the levers HAVE to match the brakes I put on (Flash) - anyone got a pair they would sell/trade/exchange for custom small metalwork?

jethin

I think I have a pair. I’ll check tomorrow.

Andy_K 

I was going through some boxes and found these things which I'll never use since I don't generally ride on tubulars and don't often sew.













I'm not especially in search of anything right now. I'm mostly just interested in getting these in the hands of someone who will value them.

Edit: These have found a good home.

jethin

I wasn’t able to help oneclick, so the search for some Modolo levers continues.

bwilli88 

I need a double DT cable stop, any brand. This is for my International.

Also any one have a 39t 110bcd chainring?
Do not have much trade bait but have some portraits of ugly presidents

unworthy1

I might have one (will look) but chances are it will be a SunTour so NOT for a metric DT (and that Simplex almost certainly is metric). So your International is a Raleigh (or maybe Nishiki?) and has Imperial tubes, correct?

strichzwei

The rear dropout spacing is 124 on my raleigh international but I assume (?) this would be a standard 126 skewer?

nlerner

David, I finally remembered to check the stash and found a couple of 52t 110 bcd rings. Still have a need?

nlerner

Brian, I have a Shimano cable stop in decent shape, as well as a 38t 110 bcd ring, new in package. Are you stateside? I’d imagine shipping to Cambodia would be dear.

bwilli88 

Stateside. Pm incoming

unworthy1

IIRC the Modolo levers for Flash calipers had black plastic (resin) bodies, am I correct? If so I might have 'em but will need a day or two to check the bins.

jethin

ISO: Left crank arm, 170mm, straight. Will be paired with a Nervar Star that nlerner generously sent me awhile back. I don't need an exact match -- just something that is the right length and of roughly similar appearance. Alternatively if you've just got to have a Nervar Star right arm I would swap for a different crankset, or possibly parts so I can finish one from my bin. Thanks.

oneclick 

Just got a set of Comando al Manubrio, one side complete, the other missing a couple of bits:




What's (now) missing is the second black friction washer, part # 174 - I made the brass locknut, that was easy.

# 174 is the same as used in the Gran Sport and Record shifters.

Mad Honk 

I have way too many bikes here in Honk-Land and once again I am asking for someone to rescue this frame and fork from my donating it to my co-op. I am reasonably sure that someone here will like this one if it fits. Raleigh 1977 Comp GS that had been repaired and re-painted by Keith Anderson in the late 70's or early 80's. I got it and recoated it in a cranberry prismatic color, added decals from Greg in OZ, and clear coated with lacquer. Reynold stickers are period correct but just a bit lower so pumps won't destroy the frame decals. 55cm ctt with a daily rider geometry. It is free but I am asking for cost of shipping from Bloomington, likely $50 through pirate ship. I had a complete NR group on it but it is just a bit too tall for me. SHS (Shrinking Human Syndrome). I can sweeten the deal with same color bottle cage, and fenders that were on it when I got it. First to PM is first in line as always, Smiles, MH Pics:

Frame and fork normal sizing for group.

Detail of decals, period correct. Comes with new SS drop out screws and Raleigh seat binder.

Down tube decal detail.

Fork decal detail.

oneclick 

I have a nice Blueline rear mech with a missing spring; this appears to be the same part as that in any of the various V-series and the first version Cyclone.

Mad Honk 

Good news fellow C&Ver's; the Raleigh has been claimed and is on the way to a new home in MA. Smiles, MH

mountaindave 

Sorry for the slow response. PM me if you’re still in need.

strichzwei

No worries, thanks for getting back to me, I was able to locate a replacement skewer.
Scott