Science behind the steele frame
#26
Senior Member
Join Date: Apr 2020
Posts: 331
Bikes: '68 Masi Special road, Grail bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 70 Times
in
58 Posts
BITD I think it was Tom Ritchey who said: a really good road bike is supposed to react like a spring
you don't make springs out of aluminum" that springy, resiliant, alive feel only comes from steel or titane
bikes alu-alloy and carbon fibre will feel dead. but the rider who only wants lightness combined with
stiffness will sadly never have the time or inclination to feel it
you don't make springs out of aluminum" that springy, resiliant, alive feel only comes from steel or titane
bikes alu-alloy and carbon fibre will feel dead. but the rider who only wants lightness combined with
stiffness will sadly never have the time or inclination to feel it
Likes For steve sumner:
#27
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,926
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,693 Times
in
974 Posts
The stiffest, least comfortable bike I own is made of steel. It is pretty much unrideable with tires less than 30 mm width. The most comfortable lively bike I own is carbon fibre, nothing dead feeling about it
#28
Senior Member
Perhaps one reason steel bikes are preffered by some people is because when aluminum frames where introduced the low end ones used larger, thick diameter tubes to compensate for the reduced strength of aluminum vs steel by volume. This design regardless of material makes for a stiffer frame.
Also, Steel is springy, Aluminum much less so, but absorbs more vibration. A well designed carbon frame might offer an almost perfect ballance of absorbing vibration, feel/springyness and low weight, and why it is the gold standard for performance road/gravel bikes.
Also, Steel is springy, Aluminum much less so, but absorbs more vibration. A well designed carbon frame might offer an almost perfect ballance of absorbing vibration, feel/springyness and low weight, and why it is the gold standard for performance road/gravel bikes.
Likes For xroadcharlie:
#29
Senior Member
Thread Starter
Join Date: May 2020
Location: Great White North
Posts: 1,226
Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 548 Post(s)
Liked 473 Times
in
302 Posts
Korina Interesting videos, thanks for sharing.
I will agree my OP was a loaded comment/question considering the audience but I wanted to get some facts behind my statement that steele is a good frame material (note I didn't say better) acknowledging that there are many other factors. I guess I have forgotten what a real crappy bike rides. like the ones I had as a kid. I guess I could head over to a big box store and take one of those bikes out for a spin. I did also change my wheels recently on my vintage steele bike and that's made a big difference in the ride.
I will agree my OP was a loaded comment/question considering the audience but I wanted to get some facts behind my statement that steele is a good frame material (note I didn't say better) acknowledging that there are many other factors. I guess I have forgotten what a real crappy bike rides. like the ones I had as a kid. I guess I could head over to a big box store and take one of those bikes out for a spin. I did also change my wheels recently on my vintage steele bike and that's made a big difference in the ride.
#30
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,955 Times
in
1,678 Posts
Curious how people are now obsessed with fitting the widest tires possible in their vintage steel bikes. Apparently not quite comfortable enough.
As I've mentioned on this site several times before, I rode pro-level steel bikes for racing and training from 1965 to 2005, when I bought my first aluminum bike. I may have ridden a couple of my steel bikes (Reynolds 531 or 853; all the Columbus SL or SP bikes are gone) a few times since then, but they're all collecting dust in the basement these days.
As Sheldon Brown wisely said, in response to a question on the topic of frame material and comfort,
"A bicycle frame is made up of triangles, and there is no compressibility in the frame members whatever they're made of. You've fallen for folklore. . . . Ride comfort is much more affected by geometry, saddle type, and, even more important, tire choice/pressure."
I still like looking at beautifully painted steel bikes, but I choose aluminum for every ride (4 hours yesterday and 4 hours today; no fillings lost).
As I've mentioned on this site several times before, I rode pro-level steel bikes for racing and training from 1965 to 2005, when I bought my first aluminum bike. I may have ridden a couple of my steel bikes (Reynolds 531 or 853; all the Columbus SL or SP bikes are gone) a few times since then, but they're all collecting dust in the basement these days.
As Sheldon Brown wisely said, in response to a question on the topic of frame material and comfort,
"A bicycle frame is made up of triangles, and there is no compressibility in the frame members whatever they're made of. You've fallen for folklore. . . . Ride comfort is much more affected by geometry, saddle type, and, even more important, tire choice/pressure."
I still like looking at beautifully painted steel bikes, but I choose aluminum for every ride (4 hours yesterday and 4 hours today; no fillings lost).
Likes For Trakhak:
#31
Member
Join Date: Mar 2016
Location: CT
Posts: 45
Bikes: Performer X-Low, Catrike Trail, Windcheetah Club Sport, HPV Grasshopper, FAW+ Velomobile (under construction)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 40 Times
in
17 Posts
Perhaps one reason steel bikes are preffered by some people is because when aluminum frames where introduced the low end ones used larger, thick diameter tubes to compensate for the reduced strength of aluminum vs steel by volume. This design regardless of material makes for a stiffer frame.
Aluminum (and titanium) do not and can fatigue over time which can also play into the tubing size and design margins.
Last edited by skier; 08-30-20 at 04:18 PM.
Likes For skier:
#32
Senior Member
Just to add the the great reply here, it’s also worth nothing the steels have a knee in the S-N curve where you can essentially achieve “infinite life” if you stay below a certain stress level. Composites can also be designed to not be impacted by fatigue.
Aluminum (and titanium) do not and can fatigue over time which can also play into the tubing size and design margins.
Aluminum (and titanium) do not and can fatigue over time which can also play into the tubing size and design margins.
#34
Senior Member
Thread Starter
Join Date: May 2020
Location: Great White North
Posts: 1,226
Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 548 Post(s)
Liked 473 Times
in
302 Posts
Sorry you didn’t get the joke in post #13 .
#35
Used to be Conspiratemus
Join Date: Jan 2009
Location: Hamilton ON Canada
Posts: 1,512
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 245 Times
in
163 Posts
Curious how people are now obsessed with fitting the widest tires possible in their vintage steel bikes. Apparently not quite comfortable enough.
[heh, heh, good zinger. Steel is real when it suits us, but rubber rocks when the going gets tough.]
As Sheldon Brown wisely said, in response to a question on the topic of frame material and comfort,
"A bicycle frame is made up of triangles, and there is no compressibility in the frame members whatever they're made of. You've fallen for folklore. . . . Ride comfort is much more affected by geometry, saddle type, and, even more important, tire choice/pressure.” . . .
[heh, heh, good zinger. Steel is real when it suits us, but rubber rocks when the going gets tough.]
As Sheldon Brown wisely said, in response to a question on the topic of frame material and comfort,
"A bicycle frame is made up of triangles, and there is no compressibility in the frame members whatever they're made of. You've fallen for folklore. . . . Ride comfort is much more affected by geometry, saddle type, and, even more important, tire choice/pressure.” . . .
OK, this is reductio ad absurdum but my point is the role of material in a bike frame (or a bridge or an orthopedic implant) cannot be dismissed just by saying triangles can’t deform, because they do. As the owner (but never racer beyond sprinting for road signs) of several high quality steel bikes I am prepared to admit the only reason to prefer them over newer materials is that they are much cheaper and fit at a sweeter spot on my personal marginal utility curve. And I have actually ridden one or two CF frames short distances. Impressed but not blown away, for the price.
And the risk of asplosion.
Last edited by conspiratemus1; 08-30-20 at 06:50 PM.
Likes For conspiratemus1:
#36
With a mighty wind
Join Date: May 2015
Posts: 2,594
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 862 Times
in
490 Posts
So I've mentioned this in other threads. I'll mention it here too.
In my racing days, I got relatively cheap aluminum frames, slapped Ultegra or Dura Ace on them, and away we went. They were fast, responsive, and light. Maybe they rode rough on 23's @ 120psi but I was like 24, who cares. They weren't sought after or special.
Lately, being done with racing I've been riding high end steel or custom made steel. There is no question that they ride better and are more comfortable. It's probably not frame material but frame quality. We also know more about tires now, so the standard 25-28 certainly help. It really isn't a fair comparison.
I did end my racing on a Litespeed Vortex. Around 2005-6. I hated that bike. It was squirrelly and slow.
In my racing days, I got relatively cheap aluminum frames, slapped Ultegra or Dura Ace on them, and away we went. They were fast, responsive, and light. Maybe they rode rough on 23's @ 120psi but I was like 24, who cares. They weren't sought after or special.
Lately, being done with racing I've been riding high end steel or custom made steel. There is no question that they ride better and are more comfortable. It's probably not frame material but frame quality. We also know more about tires now, so the standard 25-28 certainly help. It really isn't a fair comparison.
I did end my racing on a Litespeed Vortex. Around 2005-6. I hated that bike. It was squirrelly and slow.
#37
Member
Mike Burrows take on frame materials:
I think the classic steel bike looks the best! And especially I have a soft spot for lo pros. The biggest advantage of carbon fiber, beside the strength-weight ratio, is the form freedom it gives the designer. The UCI rules have kept designers from using this advantage, and thereby keeping the difference between the materials smaller.
Maybe my fascination of the lo pros is also the reason I find modern triathlon bikes far more interesting than modern road bikes (interesting is far from equal to beautiful...).
I think the classic steel bike looks the best! And especially I have a soft spot for lo pros. The biggest advantage of carbon fiber, beside the strength-weight ratio, is the form freedom it gives the designer. The UCI rules have kept designers from using this advantage, and thereby keeping the difference between the materials smaller.
Maybe my fascination of the lo pros is also the reason I find modern triathlon bikes far more interesting than modern road bikes (interesting is far from equal to beautiful...).
#38
Senior Member
Steel does seem to be an excellent choice for bike frames, Perhaps better then alluminum if we use good steel tubing (like thinwall cromoly).
Is it possible that the bicycle industry's marketing team had worked overtime, and sucessesfly convinced average consumers that alluminum bikes are better then steel to boost sales.
Then theres manufacturing cost. I'm not an engineer, But it wouldn't surprise me if it was less expensive to build good quality, inexpensive alluminum bikes then steel ones with the tighter tolerances and careful welding needed for thin tubing.
And while we could, and someone probably does build high quality, performance steel frame bikes to this day that might rival some carbon frame ones, Carbon might be the best choice for mass production.
Is it possible that the bicycle industry's marketing team had worked overtime, and sucessesfly convinced average consumers that alluminum bikes are better then steel to boost sales.
Then theres manufacturing cost. I'm not an engineer, But it wouldn't surprise me if it was less expensive to build good quality, inexpensive alluminum bikes then steel ones with the tighter tolerances and careful welding needed for thin tubing.
And while we could, and someone probably does build high quality, performance steel frame bikes to this day that might rival some carbon frame ones, Carbon might be the best choice for mass production.
Last edited by xroadcharlie; 08-31-20 at 07:29 AM.
#39
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,955 Times
in
1,678 Posts
Steel does seem to be an excellent choice for bike frames, Perhaps better then alluminum if we use good steel tubing (like thinwall cromoly).
Is it possible that the bicycle industry's marketing team had worked overtime, and sucessesfly convinced average consumers that alluminum bikes are better then steel to boost sales.
Then theres manufacturing cost. I'm not an engineer, But it wouldn't surprise me if it was less expensive to build good quality, inexpensive alluminum bikes then steel ones with the tighter tolerances and careful welding needed for thin tubing.
And while we could, and someone probably does build high quality, performance steel frame bikes to this day that might rival some carbon frame ones, Carbon might be the best choice for mass production.
Is it possible that the bicycle industry's marketing team had worked overtime, and sucessesfly convinced average consumers that alluminum bikes are better then steel to boost sales.
Then theres manufacturing cost. I'm not an engineer, But it wouldn't surprise me if it was less expensive to build good quality, inexpensive alluminum bikes then steel ones with the tighter tolerances and careful welding needed for thin tubing.
And while we could, and someone probably does build high quality, performance steel frame bikes to this day that might rival some carbon frame ones, Carbon might be the best choice for mass production.
Likes For Trakhak:
#40
Junior Member
I thought it would have been racing that would influence the move to aluminum and CF.
would they not want to shave every last gram of weight for that bit of competitive edge?
I do agree, as a non competitive rider steel is my daily ride.
would they not want to shave every last gram of weight for that bit of competitive edge?
I do agree, as a non competitive rider steel is my daily ride.
#41
curmudgineer
Join Date: Dec 2009
Location: Chicago SW burbs
Posts: 4,417
Bikes: 2 many 2 fit here
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 263 Post(s)
Liked 112 Times
in
70 Posts
A premise has been made, that the tubes of a frame triangle provide compliance by bowing, i.e. pre-buckling, which I question. A mathematical analysis would show how much bowing would be needed to provide the equivalent of a compliant suspension, and I suspect it would also show that not only aluminum, but also steel and titanium frames would be in a fatigue regime if they were bowing to such an extent. So, I tend to agree with Sheldon about the compressibility of the frame triangle.
I will grant that a steel tubing frame will twist more than one of aluminum tubing, under the same torque loading and when designed for the same mission with the same skill and resources.
I will grant that a steel tubing frame will twist more than one of aluminum tubing, under the same torque loading and when designed for the same mission with the same skill and resources.
Likes For old's'cool:
#42
Used to be Conspiratemus
Join Date: Jan 2009
Location: Hamilton ON Canada
Posts: 1,512
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 245 Times
in
163 Posts
I think I agree that a triangular bike frame cannot bow from vertical loads with anywhere near the amplitude of a compliant suspension. (Steel forks, which are not triangulated, do move enough that it has to be considered in avoiding the tire interfering with fenders or handlebar bags on rough roads.). I was thinking more about the tiny movements set up in the frame members which each impact, which can’t be seen even if they can be felt. If you strike a hard-thrown baseball with the wrong part of the bat, the vibrations transmitted to your hands are painful. A hit in the sweet spot is painless (and will more likely result in a base hit.) My thought was that different materials might be expected to handle these low-amplitude, high-frequency vibrations from road roughness differently, with the differences perceived as “lively”, “dead”, or “harsh” with “notes of assertiveness without overpowering fruitiness” . And these vibrations must be propagated through the frame tubes by tiny compression-rarefaction deformations of the (triangulated) frame material.
Last edited by conspiratemus1; 09-01-20 at 01:50 PM.
#43
Member
An ideal triangle cannot shorten any side but this assumes the sides and joints cannot bend — if a line segment bends, the polygon is no longer a triangle as there are now four angles and sides or else one side becomes a curve. So this geometric precept involves some question-begging.
Likes For Dick Chainey:
Likes For Sluggo:
#45
Used to be Conspiratemus
Join Date: Jan 2009
Location: Hamilton ON Canada
Posts: 1,512
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 245 Times
in
163 Posts
N
Thanks. Not surprised by his results and expectation/perception bias (aka placebo effect when you’ve spent money on something) is undoubtedly decisive in the macro sense. But in the micro sense, does the difference between “twanggg” and “klok” matter more than as acoustic cues to the placebo expectation?
The article in this link shows measured data that supports Sheldon's (and Trakhak's) statements with some discussion and caveats: There is not a significant amount of vertical compliance in triangulated frame. Tires (and maybe fork) are the only suspension you have.
Last edited by conspiratemus1; 09-01-20 at 01:46 PM.
#46
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
I’ve only owned and ridden steel frame bikes, so I’m no authority on comparing frame materials. OTOH, I do appreciate the fact that perfectly rideable low-end steel frames from the 80s are nearly free these days.
That said, I suspect my ride comfort comes mostly from riding technique, bike fit and choice of tire width and pressure.
Otto
That said, I suspect my ride comfort comes mostly from riding technique, bike fit and choice of tire width and pressure.
Otto
#47
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
I’m sure everyone realizes that posting this question on a C&V subforum will yield the expected results.
John
John
Likes For 70sSanO:
#48
Senior Member
Join Date: Jul 2019
Location: In the south but from North
Posts: 700
Bikes: Turner 5-Spot Burner converted; IBIS Ripley, Specialized Crave, Tommasini Sintesi, Cinelli Superstar, Tommasini X-Fire Gravel
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 406 Post(s)
Liked 389 Times
in
219 Posts
BITD I think it was Tom Ritchey who said: a really good road bike is supposed to react like a spring
you don't make springs out of aluminum" that springy, resiliant, alive feel only comes from steel or titane
bikes alu-alloy and carbon fibre will feel dead. but the rider who only wants lightness combined with
stiffness will sadly never have the time or inclination to feel it
you don't make springs out of aluminum" that springy, resiliant, alive feel only comes from steel or titane
bikes alu-alloy and carbon fibre will feel dead. but the rider who only wants lightness combined with
stiffness will sadly never have the time or inclination to feel it
#49
Junior Member
My 531 TREK 760 from1985 may be my favorite bike from an overall ride perspective. Just the right amount of springiness for this 210 lb frame., But my favorite attribute may be the quiet ride I can achieve on steel that I can't match on my Ti, CF, or AL bikes. Its akin to just floating, and since I'm old and will never again be fast or go for long days in the saddle, the quality ride of ferrous still makes me happy. At the end of the day, or the end of a two hour ride, Im reminded, THIS is what a bicycle should look like. Your experience may vary.
#50
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,799
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,024 Times
in
723 Posts
Materials matter some and shape matters some. I've got a nice carbon frame that rides about as nice as any steel bike I've ever owned, on the other hand I recently threw a leg over a rock lobster and I think it rides better then any other bike I've ever ridden and that's even after owning two DeRosas that fully convinced me the mantra that nothing rides like Derosa was a truth. I was turned off of aluminum by a trek 2300 and a schwinn fastback pro that I demo'd the first year they came out. Both had me thinking I was going to die, especially the Schwinn constantly going airborne on a rough curvy mountain descent at 50+mph. Yet I've hopped on aluminum since that was a joy to ride. Steel is real; real nice, real comfortable and real heavy but it is a legacy material that still works in this modern world to make a top notch bike for whatever purpose you need it for. But I wouldn't shun any other material on the claim its inferior, I've ridden them all; I love my steel, the carbon is sweet and I miss my Ti Litespeed classic. Just get the bike that fits your form and purpose best.