Mavic 500 Hubset w/ Mavic Skewers- NOS - 100/126 - 28h
#26
Making up the numbers
Join Date: Jun 2022
Posts: 279
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 107 Post(s)
Liked 501 Times
in
160 Posts
How readily, if at all, could the rear hub be changed to 130mm OLN?
From memory some iterations required a new ie. longer axle whereas others simply needed a different axle end cap and a 3mm spacer.
I have a beautiful 28h set built with Campagnolo Record Pave tubular rims just waiting for an incoming Ron Cooper project. The rear there started as 127mm but I had a 135mm axle turned down to 130mm for them but I’d sooner not go through that exercise again, especially as I don’t have another 135mm axle…
From memory some iterations required a new ie. longer axle whereas others simply needed a different axle end cap and a 3mm spacer.
I have a beautiful 28h set built with Campagnolo Record Pave tubular rims just waiting for an incoming Ron Cooper project. The rear there started as 127mm but I had a 135mm axle turned down to 130mm for them but I’d sooner not go through that exercise again, especially as I don’t have another 135mm axle…
#28
Full Member
Thread Starter
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 462
Bikes: '72 Peugeot PX-10, '09 A. Homer Hilsen, '78 Masi Gran Crit, '79 Echelon Spectra
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Liked 162 Times
in
100 Posts
Another bump for these gorgeous hubs!