Trek Y 22 MTB - cheap shock available
#1
Senior Member
Thread Starter
Trek Y 22 MTB - cheap shock available
I have a Trek Y 22 (1997 model) carbon frame mountain bike that needs a shock replacement. Is there an inexpensive alternative to use. I would only ride it occasionally, but would like to be able to take it out now and then. I understand that it is pretty short by todays standards (6.5 inches with only about an inch and a half of travel) Any leads would be appreciated.
#2
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,759
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times
in
14 Posts
I would try and rebuild it first, these older shocks are often pretty simple to rebuild.
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
#4
I got 99 projects
Join Date: Nov 2008
Location: Hills of Central NH
Posts: 1,581
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have a Trek Y 22 (1997 model) carbon frame mountain bike that needs a shock replacement. Is there an inexpensive alternative to use. I would only ride it occasionally, but would like to be able to take it out now and then. I understand that it is pretty short by todays standards (6.5 inches with only about an inch and a half of travel) Any leads would be appreciated.
#5
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
The Risse shocks have proven to be the best for a low-cost, but hi-quality, rebuildable replacement.
in one case, a Risse replacement reduced the rear travel of my ProFlex Attack to about 1" at the axle, but this was a retrofit for a short elastomer stack that never accommodated a damper in the first place. So now it's a race-able "soft-tail" sort of frame, whereas before it had more cush but a bouncy lack of motion control.
My brother replaced the front coil-over shock on his Girvin Vector linkage fork, and the action improved beyond all expectations.
in one case, a Risse replacement reduced the rear travel of my ProFlex Attack to about 1" at the axle, but this was a retrofit for a short elastomer stack that never accommodated a damper in the first place. So now it's a race-able "soft-tail" sort of frame, whereas before it had more cush but a bouncy lack of motion control.
My brother replaced the front coil-over shock on his Girvin Vector linkage fork, and the action improved beyond all expectations.