Missing spindle
#1
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,778
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 660 Times
in
351 Posts
Missing spindle
I spent a couple of hours cleaning up the shop and looking for a NOS 118mm Sugino spindle that I'm going to need when doing some work for a friend sometime after Christmas. It was in a quart-size ziplock bag full of other assorted spindles. I didn't find the main bag, but I did find a smaller bag containing only two spindles, one of which was, fortunately, the one I wanted. That was a stroke of luck! I made a mental note to put someplace where I wouldn't forget about it.
That was the day before yesterday. I went back into the shop today to put the spindle in a box with some other parts I'm planning to use on the same project.. But I now have no idea where the Sugino spindle could be. I I tore my hair a little bit and retraced my steps from Sunday as best I could, to no avail.
I am a little bit frustrated now. My guess is that it has somehow made its way into someone else's shop. If anyone sees the damn thing, let me know, okay?
That was the day before yesterday. I went back into the shop today to put the spindle in a box with some other parts I'm planning to use on the same project.. But I now have no idea where the Sugino spindle could be. I I tore my hair a little bit and retraced my steps from Sunday as best I could, to no avail.
I am a little bit frustrated now. My guess is that it has somehow made its way into someone else's shop. If anyone sees the damn thing, let me know, okay?
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
Last edited by jonwvara; 12-12-23 at 06:49 PM. Reason: I prefer not to say
Likes For jonwvara:
#2
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
such "disappearances" began happening to me over fifteen year in the rearview mirror
quickly learned it be healthier to laugh than to berate oneself
eventually of course all will "disappear"
-----
such "disappearances" began happening to me over fifteen year in the rearview mirror
quickly learned it be healthier to laugh than to berate oneself
eventually of course all will "disappear"
-----
Likes For juvela:
#3
Senior Member
This is a common issue in my workspace as well. Put it in a space where it won't be lost forever and..........it's gone forever. Occasionally I discover such items and wonder which bike it belongs to and if I still have that bike.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
Likes For r0ckh0und:
#4
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
famous last words -
"...this is important...i don't want to lose it...i'll put it in a special spot so i won't forget it..."
-----
#5
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,741
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1226 Post(s)
Liked 3,555 Times
in
1,410 Posts
My ‘gone forever’ was that little adjuster barrel for the back of the center pull brake bridge on a Raleigh Super Course.
One day I heard about how they cost a pretty penny because they are hard to find, and I thought, “Hey, I have one of those.” And went out to find it and I couldn’t. Not on the bike. I took it off to keep somewhere safe so I wouldn’t lose it. Hmmm.
Now I know why they are rare and cost a pretty penny.
One day I heard about how they cost a pretty penny because they are hard to find, and I thought, “Hey, I have one of those.” And went out to find it and I couldn’t. Not on the bike. I took it off to keep somewhere safe so I wouldn’t lose it. Hmmm.
Now I know why they are rare and cost a pretty penny.
Likes For AdventureManCO:
#6
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,713 Times
in
2,613 Posts
I dropped one part of a three-part tool on my basement floor last month, and it still hasn’t shown up. Unfortunately the other two parts won’t work without it, and I can only buy the whole thing, not the lost part. I keep thinking it’ll show up at some point, but no go so far. I’m worried I dropped it in the trash can, since emptied. Hmm.
#7
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
Likes For JohnDThompson:
#8
Full Member
Join Date: Jul 2023
Location: Idaho, USA
Posts: 217
Bikes: Aluminum and Steel
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 102 Post(s)
Liked 375 Times
in
138 Posts
I know where it is...it's right with the missing link for my brand new KMC chain. The one I set "right there" after sizing the chain. I refuse to return the project to the bicycle stand to finish the last job until I find that confounded link!
__________________
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
#9
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,481
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 1,631 Times
in
1,047 Posts
NOS 118mm Sugino spindle, lost to the garage gremlin. Its probably right next to the 5SB spindle ya lost two years ago...
RATS! - Keep Looking Stud!
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#10
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,994
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1181 Post(s)
Liked 2,576 Times
in
1,076 Posts
I'm pretty sure I have an early '70s Sugino Mighty spindle for ya if you're ready to give up on finding yours. Only problem is, it's engraved with "this was stolen from ____ _______" (original owner's name) and his phone number.
I called the number in about 2015 and he answered, said that bike was stolen something like 40 years before. (Who keeps one land line for 40+ years??) I offered to return it, but he said no, keep it, he doesn't ride anymore. I frenchified the parts on it (the frame is French) so the Sugino is surplus. Free to you (Jon) if you can use it, and if you don't worry about the bad karma of riding a stolen spindle.
Likes For bulgie:
#11
Senior Member
(Who keeps one land line for 40+ years??).............35 and holding
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
Likes For r0ckh0und:
#13
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,778
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 660 Times
in
351 Posts
I's a relief to finally hear from someone who doesn't have the words "senior member" under their name.
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
Likes For jonwvara:
#14
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
Listen up, guys, your stuff is probably hiding with my ziploc bag of old mismatched barcon shifters and the barrel adjuster from one of my early Dura Ace brake calipers. I'll be sure to return everything when it turns up.
#15
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
Likes For JohnDThompson:
#16
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,421
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 533 Post(s)
Liked 1,007 Times
in
516 Posts
(Who keeps one land line for 40+ years??) My mother-in-law had the same land line for over 50 years. She just moved to senior living and my brother-in-law set up her new phone to have the same number. He got her one of the Verizon boxes that she can plug her old AT&T desk-top phone into, so she can feel right at home. It has touch tone instead of a rotary dial, so it's not completely old school, but it does have the ringer that actually has bells inside.
#17
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,157
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2364 Post(s)
Liked 1,750 Times
in
1,192 Posts
You usually find such things when you're looking for something else. So the key is - start on something else that involves a part/tool/etc you can't find. While you're looking for THAT item, the spindle will show up.
Sneaking up on 30 years for my land-line number. The number in question above isn't necessarily a land-line now, just because it was 40 years ago.
Overall, this thread makes me feel MUCH better about my own part / component "inventory".
Sneaking up on 30 years for my land-line number. The number in question above isn't necessarily a land-line now, just because it was 40 years ago.
Overall, this thread makes me feel MUCH better about my own part / component "inventory".
Likes For madpogue:
#18
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 845
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
I was deep cleaning a Campy Nuovo Tipo QR skewer and put the 3mm circlip carefully on my work bench between the arms of some tweezers.
Took the fully disassembled parts through to the kitchen for degreasing / wire brushing / etc.
Came back and circlip is gone, luckily I have some generic new ones, but really annoyed with myself.
A week later vacuuming the hall I spotted it 6 inches before it would have gone into the hoover
I have some experience disassembling and repairing accordions, for which I use several 100cc screw top glass jars to store bits.
Slightly strangely a typical accordion has over a thousand parts: my 1959 Hohner Lucia IV P has 392 reeds for example.
It also weights about the same as a bike: 19.1 lbs
I've never lost an accordion part yet - I always put the bits in bottles.
Took the fully disassembled parts through to the kitchen for degreasing / wire brushing / etc.
Came back and circlip is gone, luckily I have some generic new ones, but really annoyed with myself.
A week later vacuuming the hall I spotted it 6 inches before it would have gone into the hoover
I have some experience disassembling and repairing accordions, for which I use several 100cc screw top glass jars to store bits.
Slightly strangely a typical accordion has over a thousand parts: my 1959 Hohner Lucia IV P has 392 reeds for example.
It also weights about the same as a bike: 19.1 lbs
I've never lost an accordion part yet - I always put the bits in bottles.