Harbor Freight Tools
#1
Full Member
Thread Starter
Join Date: Jul 2018
Posts: 374
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 136 Post(s)
Liked 128 Times
in
88 Posts
Harbor Freight Tools
Can anyone recommend suitable/adequate tools for pedals or headset or any bicycle application for that matter, that could be sourced from places like Harbor Freight? Seems like could be an inexpensive alternative to brands like Park etc. Thanks
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,093
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4208 Post(s)
Liked 3,875 Times
in
2,315 Posts
Some parts, like headsets, take a range of possible tools. Some of these tools are specifically designed for bikes, some not.
Again with headsets- Many threaded types need an open wrench version in either 36mm or 32mm, neither are common tools found in general hardware retailers as the thickness of the wrenches are far less then common house hold tools. But sometimes a slip joint pliers or a large (12" or 15") adjustable wrench can work. But for threadless headsets simple "L" hex wrenches do just fine and these are widely available.
So to with cup and cone hubs. Thin open end wrenches are typically needed for working the cone (and sometimes the lock nut too). We call these tools cone wrenches and are not usually found outside of the bike world.
If you have access to a grinder one can thin down common open wrenches and fit pedals more easily.
I suggest making a list of the tools needed for working on the aspects of your bike you want to do then go to the common tool place and get what you can from them that is on that list. Andy
Again with headsets- Many threaded types need an open wrench version in either 36mm or 32mm, neither are common tools found in general hardware retailers as the thickness of the wrenches are far less then common house hold tools. But sometimes a slip joint pliers or a large (12" or 15") adjustable wrench can work. But for threadless headsets simple "L" hex wrenches do just fine and these are widely available.
So to with cup and cone hubs. Thin open end wrenches are typically needed for working the cone (and sometimes the lock nut too). We call these tools cone wrenches and are not usually found outside of the bike world.
If you have access to a grinder one can thin down common open wrenches and fit pedals more easily.
I suggest making a list of the tools needed for working on the aspects of your bike you want to do then go to the common tool place and get what you can from them that is on that list. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Senior Member
Modern bikes don't need many special wrenches, except for splined lock ring wrenches that are bike specific. I bought a new wrench for my wheels manufacturing thread together BB and one for my Campy center lock disc brake rotors.
#4
Full Member
I agree with AndrewRStewart and will add that the older the bike the easier it is to get by with non-specific tools. Threaded headsets, ashtabula bb's and pre-cartridge bb's could usually be done although often not as easily.
#5
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6196 Post(s)
Liked 4,810 Times
in
3,318 Posts
Unless you are wrenching on bikes for a living, I'd not buy any special tools until you see that you have a need for them. Then consider how often you might need that tool again. I bought a tool to remove my BB back before I knew better and only used that tool once. The BB I put back in the bike required a different tool.
If you stay on friendly terms with your LBS you might find they'll loosen or tighten things like that for you every great once in a while for just cost of a decent round of conversation.
As for Harbor Freight tools, I don't have any problem with them. Just don't expect them to last a long time. I find that some wrenches and other tools don't seem to be forged or hardened as well as they should. Some just break. But I still will buy them when I only will need something a few times in my lifetime. Or it's something that friends like to "borrow" permanently.
Some will insist you have to buy the best you can, but I can buy a crap load of the same HF tool for the price of a really good quality tool. I buy quality tools when I know I'll use them quite a few times.
If you stay on friendly terms with your LBS you might find they'll loosen or tighten things like that for you every great once in a while for just cost of a decent round of conversation.
As for Harbor Freight tools, I don't have any problem with them. Just don't expect them to last a long time. I find that some wrenches and other tools don't seem to be forged or hardened as well as they should. Some just break. But I still will buy them when I only will need something a few times in my lifetime. Or it's something that friends like to "borrow" permanently.
Some will insist you have to buy the best you can, but I can buy a crap load of the same HF tool for the price of a really good quality tool. I buy quality tools when I know I'll use them quite a few times.
Last edited by Iride01; 07-25-21 at 04:05 PM.
Likes For Iride01:
#6
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,837
Bikes: 2012 Specialized Elite Disc, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 741 Times
in
430 Posts
No, you can't get bike tools at HFT. But as said several times above, you don't always need bike tools. The resourceful tinkerer can make a truing stand and a dishing tool from household scrap, for instance. But if you need a bike tool, buy a bike tool. Shop on eBay for lower priced alternatives that may work as well as the typical HF tools.
#7
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I find that Harbor Freight tools lend themselves to being ground down, bent, welded to and otherwise modified. I would not want to do any of those things to my pre-Wal-Mart Craftsman, Snap-On or other quality tools. HF hex drivers seem to be pretty good quality and fit, and the 3 torque wrenches I got from them have stayed in calibration for years. I have a long-pattern 15mm combination wrench which fits pedal flats well, no grinding needed
Likes For dsbrantjr:
#8
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,437 Times
in
819 Posts
Just my experience, when I started purchasing more than the basic bike tools, just buying as needed worked fine. I do not have to be in a hurry. I gathered info from this site and others, like youtube, parktool.com. I used a couple of self made tools a couple of times, and then wound up purchasing the tool, like a headset press. I recently used that on press fit bearings and it worked fine. Most of my tools are house brand from on-line bike shops. They are working out well for me, lower cost and I only use them occasionally.
#9
Junior Member
If you are in this for the long haul start buying decent tools as you need them. The labor you save from not paying a shop will more than pay for the tools. I do recommend getting a nice set of metric hex wrenches as they are the most used tool on bikes. The fastners on bikes are soft and cheap hex wrenches ultimately round them out. Once i switched to Wera hex wrenches the fasteners have held up so much better.
#10
Senior Member
Join Date: Jul 2020
Location: Humboldt County, CA
Posts: 832
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 405 Post(s)
Likes: 0
Liked 430 Times
in
286 Posts
Wrenches, sockets, ratchets, allens, all basic hand tools made out of a hunk o' metal? Harbor Freight tools are fine. I've rebuilt VW engines with them. (Unless you use hand tools to make your money, in which case buy the best ones you can get.)
That said, there are parts of the bicycle that require bicycle-specific tools. And I do mean require. As in, "there are no substitute tools that will work. Don't even bother trying. Buy the tools or buy new parts... and the tools."
--Shannon
That said, there are parts of the bicycle that require bicycle-specific tools. And I do mean require. As in, "there are no substitute tools that will work. Don't even bother trying. Buy the tools or buy new parts... and the tools."
--Shannon
#11
Droid on a mission
Join Date: May 2018
Location: Palm Coast, FL
Posts: 1,005
Bikes: Diamondback Wildwood Classic
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Liked 280 Times
in
195 Posts
As others have mentioned, ebay is a good source, can save a few bucks by considering used tools. I have a standard daily search on ebay for "used bike tools'. Some are deals and some are not, gotta lok around.
__________________
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
#12
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,627
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1670 Post(s)
Liked 1,825 Times
in
1,062 Posts
Waiting for a sale or a coupon (I forget which) I got a HF air compressor for less than the cost of a Silca Pisa. Unlike the Silca, it's practical and efficient for my car tires, too.
#13
With a mighty wind
Join Date: May 2015
Posts: 2,594
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 862 Times
in
490 Posts
They have Allen wrenches, box and socket wrenches, torx, screwdrivers, zip ties, a rubber mallet, hacksaw, and lots of little containers for parts and tools.
It’s a great start and all that is great to fix stuff around the house and car too.
Buy special tools as you need them.
It’s a great start and all that is great to fix stuff around the house and car too.
Buy special tools as you need them.
#14
elcraft
We once had a WT Wholesale Tool Store in our area. They were quite the resource as they carried everything from Cheap Chinese tools to name brands like Black Hawk and SK Wayne. The best part was that you could buy a single tool - not a set of tools like at HF. You could buy a single open end/ box end combo wrench or a socket in the size you needed. This allowed one to make modified or specialized tools for specific applications. They had inexpensive grinding wheels and entry level machine tools like bench grinders, small drill presses, etc.
Unfortunately, the store closed and now I can only mail order from them.
If you are lucky enough to have one of these WT Tool stores near you, you can buy a couple of 15 mm wrenches to modify into pedal spanners or cone wrenches. I modified a socket for use in dismantling Suntour derailleurs. They also had inexpensive, oversized open ended wrenches for large machine tool applications. These could be ground to metric dimensions for headset wrenches or Bottom bracket tools. sThe possibilities were limitless…
Unfortunately, the store closed and now I can only mail order from them.
If you are lucky enough to have one of these WT Tool stores near you, you can buy a couple of 15 mm wrenches to modify into pedal spanners or cone wrenches. I modified a socket for use in dismantling Suntour derailleurs. They also had inexpensive, oversized open ended wrenches for large machine tool applications. These could be ground to metric dimensions for headset wrenches or Bottom bracket tools. sThe possibilities were limitless…