Tubeless Valve for Narrow Rims
#1
Junior Member
Thread Starter
Tubeless Valve for Narrow Rims
Picked up some Muc Off valves for my Giant P-R2 wheels. With this valve there is not enough space between the rim and valve flange. Tires are Vittoria Rubino Pro G2,0. What valve would work for my application?
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,725
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,585 Times
in
1,433 Posts
Odds are that you can file the round base to a "racetrack oval". Just be sure to round off all edges when finished.
Since I've not seen either your specific valve or rim, it's up to you to decide whether this seems feasible.
Since I've not seen either your specific valve or rim, it's up to you to decide whether this seems feasible.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Junior Member
Thread Starter
I returned the valve I had. I thought about filing the flange, but it thought it would be compromised with the amount material to be removed. The pictured valve looks like it should work.