looking for a pair of dummie brake levers..
#1
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
looking for a pair of dummie brake levers..
Is that what we call them?
I know Dia-Comp made some. Thought I'd ask these two questions…..
1, does anybody have a set they want to sell? I know I can look on ebay, but would rather ask here first.
2, I have a drawer full of Italian brake levers, including some Campy with scratched tips. Does anybody know how to convert them to dummy?
I could shorten them to just below the branding, but how to make them stay in place, or at least not flop about.
Thanks all,
Robert
New COLNAGO tandem owner (I'm new, not the 'Nago which was built for the 1980 olympics that America's boycotted.)
I know Dia-Comp made some. Thought I'd ask these two questions…..
1, does anybody have a set they want to sell? I know I can look on ebay, but would rather ask here first.
2, I have a drawer full of Italian brake levers, including some Campy with scratched tips. Does anybody know how to convert them to dummy?
I could shorten them to just below the branding, but how to make them stay in place, or at least not flop about.
Thanks all,
Robert
New COLNAGO tandem owner (I'm new, not the 'Nago which was built for the 1980 olympics that America's boycotted.)
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Last edited by Robvolz; 06-12-23 at 02:42 PM.
#2
Senior Member
Join Date: Jul 2005
Posts: 5,994
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2496 Post(s)
Liked 739 Times
in
523 Posts
If I had a drawer full of vintage brake levers I wouldn't shell out good money for the Dia-Compe dummy levers. I'm not sure I would even bother trying to shorten the lever blades. As for immobilizing the blades ... just go for it. Pack the area with something. You're not trying to make it rigid, you're just keeping it from flopping, like you said. You'll come up with something.
Likes For Leisesturm:
#3
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
Headed to Tacoma Screw. I think I can get a spring to fit in there somehow.
I'll post results.
I'll post results.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#5
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,381
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2489 Post(s)
Liked 2,958 Times
in
1,681 Posts
Removal of the lever blade, if that's what it's called, so that only the body of the lever remains is usually easy.
#6
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
agreed, but then there is a gaping hole.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#7
Junior Member
Likes For Yamato72:
#8
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 705
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 175 Times
in
107 Posts
Is that what we call them?
I know Dia-Comp made some. Thought I'd ask these two questions…..
1, does anybody have a set they want to sell? I know I can look on ebay, but would rather ask here first.
2, I have a drawer full of Italian brake levers, including some Campy with scratched tips. Does anybody know how to convert them to dummy?
I could shorten them to just below the branding, but how to make them stay in place, or at least not flop about.
Thanks all,
Robert
New COLNAGO tandem owner (I'm new, not the "Nano which was built for the 1980 olympics that America's boycotted.)
I know Dia-Comp made some. Thought I'd ask these two questions…..
1, does anybody have a set they want to sell? I know I can look on ebay, but would rather ask here first.
2, I have a drawer full of Italian brake levers, including some Campy with scratched tips. Does anybody know how to convert them to dummy?
I could shorten them to just below the branding, but how to make them stay in place, or at least not flop about.
Thanks all,
Robert
New COLNAGO tandem owner (I'm new, not the "Nano which was built for the 1980 olympics that America's boycotted.)
#9
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
and you are in San Diego!!
I was just down there for the big swap meet at the velodrome
I appreciate your offer. I'm experimenting with both a skinny screw that locks the lever in place. Plus, the little springs from Shimano 105 levers if I swap the grub screw on the Campy with one with a head to hold the spring in place.
I already cut down a scratched to hell campy lever set, so let me play around a bit more before I go Dia-Comp.
I do appreciate the offer.
Robert
I was just down there for the big swap meet at the velodrome
I appreciate your offer. I'm experimenting with both a skinny screw that locks the lever in place. Plus, the little springs from Shimano 105 levers if I swap the grub screw on the Campy with one with a head to hold the spring in place.
I already cut down a scratched to hell campy lever set, so let me play around a bit more before I go Dia-Comp.
I do appreciate the offer.
Robert
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#10
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 705
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 175 Times
in
107 Posts
and you are in San Diego!!
I was just down there for the big swap meet at the velodrome
I appreciate your offer. I'm experimenting with both a skinny screw that locks the lever in place. Plus, the little springs from Shimano 105 levers if I swap the grub screw on the Campy with one with a head to hold the spring in place.
I already cut down a scratched to hell campy lever set, so let me play around a bit more before I go Dia-Comp.
I do appreciate the offer.
Robert
I was just down there for the big swap meet at the velodrome
I appreciate your offer. I'm experimenting with both a skinny screw that locks the lever in place. Plus, the little springs from Shimano 105 levers if I swap the grub screw on the Campy with one with a head to hold the spring in place.
I already cut down a scratched to hell campy lever set, so let me play around a bit more before I go Dia-Comp.
I do appreciate the offer.
Robert
#11
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,909
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,932 Times
in
2,557 Posts
If you know someone with an ultrasound, you could clean the levers with it then dribble/pack epoxy into the hinge. Clean enough and enough epoxy and that lever or lever base isn't going anywhere.
Likes For 79pmooney:
#12
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
I wish I could find a cone shaped nut to go in the cable head hole that looks like this
#13
Full Member
Are these what you are looking for? If interested, PM me. For the cone shaped nut you show above, this is something that might be 3D printable in plastic if it does not need to provide a super strong clamping force.
(Sorry about the messy worktable, I am in the middle a few projects)
(Sorry about the messy worktable, I am in the middle a few projects)
#14
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,940
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 1,822 Times
in
663 Posts
those are them!!
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."