PFP-3 replacement
05-06-23, 03:04 PM
#1
Full Member
Thread Starter
Join Date: Mar 2020
Location: NW Minnesota
Posts: 209
Bikes: Lemond Poprad, Cervelo Soloist, Cannondale F4, RANS Velocity Squared
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 67 Times
in
45 Posts
PFP-3 replacement
I am wondering if all or most Park tool pumps use heads that are interchangeable. Went on to Park tool and basically my PFP-3 is now a PFP-8.
I just need a new head as the old one is worn out.
Thanks.
I just need a new head as the old one is worn out.
Thanks.
05-07-23, 09:14 AM
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,002
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6198 Post(s)
Liked 4,816 Times
in
3,323 Posts
What are you calling the "head"? If that is the airchuck that you attach to the valve of the tube/tire. Then you can hunt around and find both the airchuck and and hose at a lot of places once you figure out the proper search terms for that site or search engine. Your only real issue might be that the hose ID or OD might be different and sometimes that can be an issue.
Also, if you go toPark Tools website and look for replacement parts then you'll find that they show what they call the head and apparently it's still available to purchase, though I didn't try.
PFP-3 Parts | Park Tool
Also, if you go toPark Tools website and look for replacement parts then you'll find that they show what they call the head and apparently it's still available to purchase, though I didn't try.
PFP-3 Parts | Park Tool
Likes For Iride01:
05-07-23, 07:46 PM
#3
Full Member
Thread Starter
Join Date: Mar 2020
Location: NW Minnesota
Posts: 209
Bikes: Lemond Poprad, Cervelo Soloist, Cannondale F4, RANS Velocity Squared
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 67 Times
in
45 Posts
Thanks. I guess it's the chuck. I did go to Park tools and my pump is the PFP-3. I guess they are up to the PFP-8 now. Was just wondering if the replacement chuck would fit my PFP-3.
05-07-23, 10:33 PM
#4
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
This Park pump rebuild kit is compatible with PFP 3,5,6,7,8. It includes both the chuck and plunger o-ring.
https://www.jensonusa.com/Park-Tool-...mp-Rebuild-Kit
I have a PFP3 I bought 20 years ago. About 5 years ago, I bought this kit and pump is like brand new, all for a $3 kit. That's one thing I like about Park; they offer rebuild kits and parts for their tools.
More than you ever wanted to know about your PFP3: https://www.parktool.com/en-us/blog/...-pfp-3-service
Also, I've emailed Park with technical or compatibility questions, and they usually reply within a few hours.
https://www.jensonusa.com/Park-Tool-...mp-Rebuild-Kit
I have a PFP3 I bought 20 years ago. About 5 years ago, I bought this kit and pump is like brand new, all for a $3 kit. That's one thing I like about Park; they offer rebuild kits and parts for their tools.
More than you ever wanted to know about your PFP3: https://www.parktool.com/en-us/blog/...-pfp-3-service
Also, I've emailed Park with technical or compatibility questions, and they usually reply within a few hours.
Last edited by MudPie; 05-07-23 at 10:37 PM.
Likes For MudPie:
