DT Swiss tandem 540+Hugi disc adapter collar
12-04-23, 06:07 AM
#1
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
DT Swiss tandem 540+Hugi disc adapter collar
Hello
I have a dt swiss 540 and hugi tandem hubs.. Both have a 9mm thick collar that sits on a threaded hub boss to accommodate a disc rotor or when removed a drum brake....
The OLN on my wheels is 140mm
After seeing another post detailing the failure of one of these collars I noticed mine is 9mm whereas some are 20mm (145mm OLN)
Is my 9mm dictated by the 140mm OLN.?
Is the 9mm strong enough.?
Thanks for sharing your experience
David
Is
I have a dt swiss 540 and hugi tandem hubs.. Both have a 9mm thick collar that sits on a threaded hub boss to accommodate a disc rotor or when removed a drum brake....
The OLN on my wheels is 140mm
After seeing another post detailing the failure of one of these collars I noticed mine is 9mm whereas some are 20mm (145mm OLN)
Is my 9mm dictated by the 140mm OLN.?
Is the 9mm strong enough.?
Thanks for sharing your experience
David
Is
12-05-23, 12:46 PM
#2
Full Member
Join Date: Mar 2015
Location: San Francisco
Posts: 259
Bikes: 2000 Santana Sovereign SE; 2005 Co-Motion Speedster; Kona Kilauea with various dorky commuter accoutrements; Mercier Kilo TT fixie; Burley Fladbed trailer for groceries, bags of cement and the like.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Likes: 0
Liked 85 Times
in
41 Posts
Hello
I have a dt swiss 540 and hugi tandem hubs.. Both have a 9mm thick collar that sits on a threaded hub boss to accommodate a disc rotor or when removed a drum brake....
The OLN on my wheels is 140mm
After seeing another post detailing the failure of one of these collars I noticed mine is 9mm whereas some are 20mm (145mm OLN)
Is my 9mm dictated by the 140mm OLN.?
Is the 9mm strong enough.?
Thanks for sharing your experience
David
Is
I have a dt swiss 540 and hugi tandem hubs.. Both have a 9mm thick collar that sits on a threaded hub boss to accommodate a disc rotor or when removed a drum brake....
The OLN on my wheels is 140mm
After seeing another post detailing the failure of one of these collars I noticed mine is 9mm whereas some are 20mm (145mm OLN)
Is my 9mm dictated by the 140mm OLN.?
Is the 9mm strong enough.?
Thanks for sharing your experience
David
Is
12-05-23, 02:47 PM
#3
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That's very very helpful.... Thank you
Of interest which of the three sizes did you end up with the use in your 145mm OLN
Cheers
Of interest which of the three sizes did you end up with the use in your 145mm OLN
Cheers
12-05-23, 07:34 PM
#4
Full Member
Join Date: Mar 2015
Location: San Francisco
Posts: 259
Bikes: 2000 Santana Sovereign SE; 2005 Co-Motion Speedster; Kona Kilauea with various dorky commuter accoutrements; Mercier Kilo TT fixie; Burley Fladbed trailer for groceries, bags of cement and the like.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Likes: 0
Liked 85 Times
in
41 Posts
