Chain?
#1
Senior Member
Thread Starter
Chain?
Hello, I have a NOS Regina 6 speed freewheel, it does have the notch tooth pattern, as it is a ORO. So, new Everest chain, age of both parts seems to say they should work together smoothly. Not, I have the infamous chain riding up on top of the cogs before finally settling down. So, what chain modern, etc. should I try? I am not changing the freewheel. Thanks road195
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,809
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 1,336 Times
in
842 Posts
I have a 6-speed Regina America with 2-tooth progression. I have to shift and apply power a bit carefully to avoid having my SRAM PC-58 chain ride up on the 19T cog, against the 21T. This means no emergency power shifts while climbing.
I recently cobbled together a 13-15-17-19-22-25 out of parts of two Regina America 6-speeds (13-15-17-19-21-23 and 14-16-18-20-22-25), and the 19-22 gap seems much better-behaved with the same chain.
I recently cobbled together a 13-15-17-19-22-25 out of parts of two Regina America 6-speeds (13-15-17-19-21-23 and 14-16-18-20-22-25), and the 19-22 gap seems much better-behaved with the same chain.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069