Are quick links REALLY single use?
#1
Curmudgeon
Thread Starter
Join Date: Nov 2018
Location: Triangle NC
Posts: 336
Bikes: Specialized Diverge Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 32 Times
in
28 Posts
Are quick links REALLY single use?
Quick links are described as “use only once” in the user/installation documentation.
is that just super cautious input from the manufacturer or truly a smart practice?
I have reused them before but, hey, maybe I was tempting fate.
is that just super cautious input from the manufacturer or truly a smart practice?
I have reused them before but, hey, maybe I was tempting fate.
#3
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
Depends on the link. Some say 1 use, some 1 use means the life of the chain. I've always done life of the chain running 9-10 speed SRAM chains and throw the old one in my bag as a spare when replacing a chain.
No experience with 11-12 speed.
No experience with 11-12 speed.
Likes For dedhed:
#5
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
Agree about Wippermann. I use KMC chains on my folder, and it says not to re-use it but as the chain path involves only one front and one rear sprocket (IGH), I figure there's less likelihood of the link uncoupling itself. I have re-used the link about 5 times so far, and it still requires some effort to disconnect it.
Not sure how I'd feel about trusting the link on a derailleur-based drivetrain where the chain flexes sideways. But remember that you can get the Wippermann links and use them on other brands of chains.
Not sure how I'd feel about trusting the link on a derailleur-based drivetrain where the chain flexes sideways. But remember that you can get the Wippermann links and use them on other brands of chains.
Likes For sweeks:
#6
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,673
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,061 Times
in
745 Posts
I generally get around 10K miles on a KMC 10sp link with multiple chains and works out to around 20+ remove/replaces. I change it when slight grooves from wear show up in the inside of the link. Never had one fail yet.
Likes For Crankycrank:
#7
ignominious poltroon
Join Date: Jan 2022
Posts: 4,036
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2239 Post(s)
Liked 3,434 Times
in
1,797 Posts
I am very paranoid, and I re-use my Shimano links for the life of the chain. So far, I have never had a problem.
From a product liability standpoint, they have nothing to lose by telling you to change them each time. A bike shop will do that, too.
From a product liability standpoint, they have nothing to lose by telling you to change them each time. A bike shop will do that, too.
Likes For Polaris OBark:
#8
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 845
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
Using a KMC 8 speed chain here, still using the original "missing link" after about 1k miles.
Still hard to remove after about 10 times.
Still hard to remove after about 10 times.
Likes For Aardwolf:
#9
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I consider "single use" to mean "use with one chain" and toss both when worn. IIRC there was some patent or another which kept folks from advertising reuseable links, calling them single-use instead; helps sales, too.
#10
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,396
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 448 Times
in
337 Posts
I've always reused them. Some are directional, especially with 10-speed and greater. Make sure to get the direction correct.
Likes For oldbobcat:
#11
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
+1 However, after the chain has been discarded, I keep used links with my on-bike tool kits as an emergency repair part if a chain is damaged during a ride. It only has to be good enough to get me home.
Likes For HillRider:
#12
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I keep new ones as spares; I would be too lazy/forgetful to take the worn link out and replace it when I get home. I also have a little piece of coat hanger wire bent into a double hook tool to hold the chain ends while I insert and close the link, that I keep with them.
Likes For dsbrantjr:
#13
Full Member
Join Date: Jan 2022
Location: Albuquerque NM USA
Posts: 492
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 222 Post(s)
Liked 304 Times
in
194 Posts
I have always assumed that single use meant, on a single chain. This makes sense as both the chain and link will wear over time. Therefore do not reuse on a new chain. Perhaps I have this wrong, but I've disconnected and reconnected the same link on a chain for the life of a chain. Probably a few dozen disconnects and reconnects for various reasons. It would be completely absurd to expect to literally only snap it together once and apart once and then not reuse it.
Common sense suggests that if it doesn't actually snap together anymore, then it should be replaced. But I've never had one that didn't still have a positive snap when reconnecting throughout the life of the chain.
Also, in all the things I've read in forums like this, I have never once read where a master link failed in any way. Not saying it hasn't happened, but I've yet to hear of it.
Common sense suggests that if it doesn't actually snap together anymore, then it should be replaced. But I've never had one that didn't still have a positive snap when reconnecting throughout the life of the chain.
Also, in all the things I've read in forums like this, I have never once read where a master link failed in any way. Not saying it hasn't happened, but I've yet to hear of it.
Likes For Mtracer:
Likes For rbrides:
#15
Recreational Road Cyclist
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 548
Bikes: 1990 Peter Mooney road bike
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 252 Times
in
134 Posts
Likes For BCDrums:
#16
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 845
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
Aardy, try the Wippermann Connex link mentioned above. Connects and disconnects without tools. Bike shops, online dealers and Amazon have them. Great engineering.
I've got the removal pliers for KMC links, but the link isn't going to fall off any time soon.
#17
Sr Member on Sr bikes
What has changed? 10-15 years ago it seemed like ANY use of quick links was considered substandard care/maintenance. Now it seems like the preferred method for chain connection. Has the quality of quick links improved? Are they now engineered to the same standards as a normal chain link? Or have cyclists just come to accept them as they are, and just deal with the slight inferiority compared to a traditional link?
Dan
Dan
#18
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,790
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3511 Post(s)
Liked 2,926 Times
in
1,775 Posts
#20
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,673
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,061 Times
in
745 Posts
What has changed? 10-15 years ago it seemed like ANY use of quick links was considered substandard care/maintenance. Now it seems like the preferred method for chain connection. Has the quality of quick links improved? Are they now engineered to the same standards as a normal chain link? Or have cyclists just come to accept them as they are, and just deal with the slight inferiority compared to a traditional link?
Dan
Dan
#21
Recreational Road Cyclist
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 548
Bikes: 1990 Peter Mooney road bike
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 252 Times
in
134 Posts
Has the quality of quick links improved? Are they now engineered to the same standards as a normal chain link? Or have cyclists just come to accept them as they are, and just deal with the slight inferiority compared to a traditional link?
Likes For BCDrums:
#22
Senior Member
The quick link is still an inferior attachment method relative to the older approach of using a pressed-in pin, and then peening (mushrooming) the end of the pin. However, yesterday I saw a Shimano chain in which the pressed-in pin was only secured to only one of the two chain side plates; installation error.
Reason for quick-links: if installed with some care and observation they are good enough for the vast majority of miles put on by the vast majority of riders. The Shimano pressed-in pin was the best attachment method in terms of integrity and security, but shops hated them because they took 60 seconds longer to install, and you had to actually read the documentation. Campagnolo chains were similarly superior, but shops didn't want to buy a $200 peening tool.
PS: do NOT donate your old chain to your local bike Co-op; it causes us far more trouble than it is worth. A stretched-out chain has less than zero utility to anyone; please discard.
#23
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,790
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3511 Post(s)
Liked 2,926 Times
in
1,775 Posts
This is a very expensive hobby. Even quick links can be pricey. I find it silly that someone can spend several thousand on a bike and still quibble about the price of a quick link.
#24
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,422
Bikes: Two Cross Checks, a Karate Monkey, a Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,294 Times
in
647 Posts
What has changed? 10-15 years ago it seemed like ANY use of quick links was considered substandard care/maintenance. Now it seems like the preferred method for chain connection. Has the quality of quick links improved? Are they now engineered to the same standards as a normal chain link? Or have cyclists just come to accept them as they are, and just deal with the slight inferiority compared to a traditional link?
Dan
Dan
#25
Sr Member on Sr bikes
Dan