Wheel truing and stickers
#1
Newbie
Thread Starter
Wheel truing and stickers
When truing brake rims with stickers I get quite annoyed by the added height of the stickers.
I try to maintain the true over the sticker and after jumping off the end of the sticker aim for the same dial reading prior to the sticker.
Now I know a bunch of you can't be assed with dials, however, some of us do, and I like it.
It appeals to my desire for perfection.
Each wheel I look at I am aiming for absolute zero variation because however unlikely its a challenge and it is fun.
Stickers are a pain in my ass.
However, you can't just peel them off, some of them look good and the wheel often belongs to someone else...
How do you guys pragmatically/systematically approach this issue?
I try to maintain the true over the sticker and after jumping off the end of the sticker aim for the same dial reading prior to the sticker.
Now I know a bunch of you can't be assed with dials, however, some of us do, and I like it.
It appeals to my desire for perfection.
Each wheel I look at I am aiming for absolute zero variation because however unlikely its a challenge and it is fun.
Stickers are a pain in my ass.
However, you can't just peel them off, some of them look good and the wheel often belongs to someone else...
How do you guys pragmatically/systematically approach this issue?
#2
Really Old Senior Member
I use the ignore list.
Likes For Bill Kapaun:
#3
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,219 Times
in
2,366 Posts
When truing brake rims with stickers I get quite annoyed by the added height of the stickers.
I try to maintain the true over the sticker and after jumping off the end of the sticker aim for the same dial reading prior to the sticker.
Now I know a bunch of you can't be assed with dials, however, some of us do, and I like it.
It appeals to my desire for perfection.
Each wheel I look at I am aiming for absolute zero variation because however unlikely its a challenge and it is fun.
Stickers are a pain in my ass.
However, you can't just peel them off, some of them look good and the wheel often belongs to someone else...
How do you guys pragmatically/systematically approach this issue?
I try to maintain the true over the sticker and after jumping off the end of the sticker aim for the same dial reading prior to the sticker.
Now I know a bunch of you can't be assed with dials, however, some of us do, and I like it.
It appeals to my desire for perfection.
Each wheel I look at I am aiming for absolute zero variation because however unlikely its a challenge and it is fun.
Stickers are a pain in my ass.
However, you can't just peel them off, some of them look good and the wheel often belongs to someone else...
How do you guys pragmatically/systematically approach this issue?
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#4
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Likes For ThermionicScott:
#5
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
#6
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18378 Post(s)
Liked 4,512 Times
in
3,354 Posts
All of my bikes use rim brakes.
My VAR truing stand is quite sensitive so I could imagine added bumps being annoying.
I wonder if you could run your gauges on the inside of the rim. There still may be a seam, but that would only be a single bump.
The rollers on the VAR stand are pretty big, and I like narrow rims, so it might be a struggle to get it all in there.
My VAR truing stand is quite sensitive so I could imagine added bumps being annoying.
I wonder if you could run your gauges on the inside of the rim. There still may be a seam, but that would only be a single bump.
The rollers on the VAR stand are pretty big, and I like narrow rims, so it might be a struggle to get it all in there.
#7
Newbie
Thread Starter
There shouldn’t be any stickers on the brake surface. If you are using dial indicators around the labels of the rim, you are using your dial indicators wrong. Further, a wheel doesn’t need to be so true that the thickness of a vinyl sticker (which shouldn’t be on the brake surface) knocks the true off. Stickers are 0.1mm thick. Wheels only need a run out of 1 to 2mm to be considered “true”
Disc brake rims! Not rims with brake tracks!
#8
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
Cover the whole rim with stickers. When you're done obsessing truing the wheel, take them off.
Likes For Rolla:
#9
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,437 Times
in
2,763 Posts