Strip and polish
#1
Senior Member
Thread Starter
Join Date: Nov 2015
Posts: 87
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Strip and polish
Hey just pulled a k2 attack out of the ditch(be a hero rescue a bike) and i have stripped it and polished it but am having the toughest time getting in to the little crevices. Besides steel wool and sand paper ( 80,150,225,400,600,800,1000,1200) what is the best way and the best tools to get a nice mirror polish on the frame. Also any lessons you can teach me before learning the hard way?
#2
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,860
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 728 Times
in
388 Posts
Truth be told, it takes a lot of elbow grease no matter what you do. For the nooks & crannies, chuck a small polishing wheel in a hand drill and go for it. Go to a real hardware store - not Home Depot - and see what you can find. My local store has 3", 4" and 6" diameter cloth wheels and appropriate arbors. Start out with some red rubbing compound, then white polishing compound, then Mother's Mag Polish to finish. Remember: you've removed any protection against oxidation. You'll have to re-polish every few months to keep it shiny.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#3
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 644 Times
in
365 Posts
Truth be told, it takes a lot of elbow grease no matter what you do. For the nooks & crannies, chuck a small polishing wheel in a hand drill and go for it. Go to a real hardware store - not Home Depot - and see what you can find. My local store has 3", 4" and 6" diameter cloth wheels and appropriate arbors. Start out with some red rubbing compound, then white polishing compound, then Mother's Mag Polish to finish. Remember: you've removed any protection against oxidation. You'll have to re-polish every few months to keep it shiny.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
Now I'm going to have to try that. Lucky for me, I'don't have any aluminum frames at the moment.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#4
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
I am thinking you will want to clear coat it after to keep it shiny.
#6
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
https://www.dremel.com/en-us/Accessor...l.aspx?pid=422 felt polishing
https://www.dremel.com/en-us/Accessor...l.aspx?pid=462 rubber abrasive
#7
Senior Member
Thread Starter
Join Date: Nov 2015
Posts: 87
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Truth be told, it takes a lot of elbow grease no matter what you do. For the nooks & crannies, chuck a small polishing wheel in a hand drill and go for it. Go to a real hardware store - not Home Depot - and see what you can find. My local store has 3", 4" and 6" diameter cloth wheels and appropriate arbors. Start out with some red rubbing compound, then white polishing compound, then Mother's Mag Polish to finish. Remember: you've removed any protection against oxidation. You'll have to re-polish every few months to keep it shiny.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
I have a Easy Racers Gold Rush aluminum recumbent that I bought used. It was bare aluminum originally and looked like it had spent a couple years outside in Arizona... very dull and beat up. I removed all the parts, then spent a couple weeks of evenings restoring the polish with the above method. It now shines like a mirror.
as you can see my tools are limited and not specific. i actually ended up hand polishing it but ill redo it once i get the proper tools and post some more pics. thanks for the advice
#8
Senior Member
Thread Starter
Join Date: Nov 2015
Posts: 87
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#9
Senior Member
Thread Starter
Join Date: Nov 2015
Posts: 87
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#10
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,860
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 728 Times
in
388 Posts
Sort of. IMO, clear coat won't stick really well to the polished surface and will be prone to scratches and wear. It's better to figure on polishing it a couple times a year to take off the layer of oxidation. Once the frame is polished, it's not too tough to keep it that way.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..