Changing 8 speed cassette to 10 speed
#1
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Changing 8 speed cassette to 10 speed
Need advice please.
I own a 2005 a trek 4500. My crank seems worn.
Would like to know if it's possible to change my 8 speed Shimano cassette to 10 speed, plus the crank. Original Deore derailler.
How would I go about it and what shimano shifters would I need?
I own a 2005 a trek 4500. My crank seems worn.
Would like to know if it's possible to change my 8 speed Shimano cassette to 10 speed, plus the crank. Original Deore derailler.
How would I go about it and what shimano shifters would I need?
#2
S'toon trail rider!
Join Date: Jul 2009
Location: Saskatoon, SK
Posts: 451
Bikes: 2011 Norco Mountaineer(XC/Trails), 2011 Jamis Commuter1(commuter)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nope.
But you definatly could run 9speed. Freehub is different and derailleur is different
But you definatly could run 9speed. Freehub is different and derailleur is different
#3
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 641 Times
in
398 Posts
A 10 speed cassette WILL fit the hub. 8-10 speed are the same. Your rear derailleur may or may not have the range to work, it's hard to say. You would need 10 speed shifters, obviously.
#4
Senior Member
You'll need a new shifter, derailleur, cassette at the minimum.
#5
Senior Member
Take it to your LBS - they have tools to measure wear and will be able to help you if parts are worn.
I would recommend shifter, derailleur, chain, cassette and chain rings.
I would recommend shifter, derailleur, chain, cassette and chain rings.
Last edited by grubetown; 03-21-17 at 02:36 AM.
#6
Moar cowbell
Join Date: Oct 2004
Location: The 509
Posts: 12,481
Bikes: Bike list is not a resume. Nobody cares.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
And a 10-speed chain.
__________________
RST Suspension | Canfield Bikes | 7iDP Protection | Maxxis | Renthal | Hayes | VonZipper Optics | GoPro
Originally Posted by Mark Twain
"Don't argue with stupid people; they will drag you down to their level and then beat you with experience."
#7
Senior Member
Join Date: Aug 2016
Location: Brisbane Aust
Posts: 1,643
Bikes: Giant ToughRoad Giant talon
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 705 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
There is a good chance a lot more than the crank is worn with a bike that old. Considering it was a mid-range bike to start with, I would recommend putting it to one side and buying a new bike. The money you spend will be well worth it if you are a dedicated rider.
I know what it's like to keep an old clunker well beyond it's lifespan, you get attached to a bike that has given you so much pleasure but at the end of the day it's just a machine that needs replacing. Of course doing a full restore on an old bike for the love of it is another matter. I have done that too but I always have another bike I can use for my regular exercise.
2005 Trek 4500 - BikePedia
I know what it's like to keep an old clunker well beyond it's lifespan, you get attached to a bike that has given you so much pleasure but at the end of the day it's just a machine that needs replacing. Of course doing a full restore on an old bike for the love of it is another matter. I have done that too but I always have another bike I can use for my regular exercise.
2005 Trek 4500 - BikePedia