Is "groupset" an outdated concept that only mfgs are pushing?
#1
100% Certified Beast
Thread Starter
Join Date: Nov 2010
Location: Arctic (Near Russia)
Posts: 321
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Is "groupset" an outdated concept that only mfgs are pushing?
except for shifters and possibly matching derailleurs I have mixed tons of stuff across brands and speeds and they all work fine. The front derailleur can be swapped across brands and even between speeds and they work fine. Same for most Shimano rear derailleurs. As a last resort, I put on a 7 or 8 speed thumb friction shifter and it shifts everything from 8 to 12 speeds in the rear.
#3
Full Member
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 293
Bikes: Lynskey GR270
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 69 Times
in
49 Posts
Nobody said you HAVE to use all parts from a certain groupset together. Shimano even publishes a compatibility matrix for parts from different groupsets. Call it series, call it line, call it what you want, it's still a set of parts that were released together as part of a group, no?
#4
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,546
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,435 Times
in
2,761 Posts
At least OP didn't call it a "gruppo" or some variation of such.
Likes For shelbyfv:
#5
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
except for shifters and possibly matching derailleurs I have mixed tons of stuff across brands and speeds and they all work fine. The front derailleur can be swapped across brands and even between speeds and they work fine. Same for most Shimano rear derailleurs. As a last resort, I put on a 7 or 8 speed thumb friction shifter and it shifts everything from 8 to 12 speeds in the rear.
Likes For Marcus_Ti:
#6
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,398 Times
in
2,057 Posts
except for shifters and possibly matching derailleurs I have mixed tons of stuff across brands and speeds and they all work fine. The front derailleur can be swapped across brands and even between speeds and they work fine. Try a shimano Mt FD with an indexed road shifter. Same for most Shimano rear derailleurs. As a last resort, I put on a 7 or 8 speed thumb friction shifter and it shifts everything from 8 to 12 speeds in the rear. If it has enough cable pull to cover the distance on a 11 or 12s
#7
Senior Member
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times
in
62 Posts
I mismatch all the time. On my bikepacking bike, I use Deore XT derailleurs as they are heavier than XTR but I use XTR shifters because they shift better.
On my road tandem I have 105 shifters but Deore derailleurs as they come in a long cage to handle the 3x10 drivetrain and large cassette on the back.
My Giant TCR though has all 105 components as that is what it had when purchased new.
On my road tandem I have 105 shifters but Deore derailleurs as they come in a long cage to handle the 3x10 drivetrain and large cassette on the back.
My Giant TCR though has all 105 components as that is what it had when purchased new.
#8
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
The "component group" concept started out as a marketing scheme and only gained a functional relevance with the advent of indexed shifting, where drivetrain components could only be expected to work well together when designed together.
#9
Senior Member
the groupset is how manufacturers differentiate certain levels of quality and use. Like someone who is a pro racer would want extremely light and good XTR hubs, brakes, crank and RD and so on. nothing really stops you from mixing or using other manufacturers where possible (i.e. you can use a RF crank with SRAM Rd etc.). It is reasonable to assume that someone who has an Altus RD isn't in need of an XTR crank.
The only thing that really needs to match are derailleurs and shifters that most often need to be from the same manufacturer. There are exception. but often you can mix different levels from the same manufacturer (i.e. NX RD and X01 shifter etc.).
Of course the manufacturers would love to have a bike equipped with everything from them. Part is marketing.
In many drivetrain discussions people seem to not understand that the number of speeds matters. For example, people argue over upgrading from NX Eagle to GX and think they also need to upgrade the freehub to use GX (xD) cassettes. Totally not true.
The only thing that really needs to match are derailleurs and shifters that most often need to be from the same manufacturer. There are exception. but often you can mix different levels from the same manufacturer (i.e. NX RD and X01 shifter etc.).
Of course the manufacturers would love to have a bike equipped with everything from them. Part is marketing.
In many drivetrain discussions people seem to not understand that the number of speeds matters. For example, people argue over upgrading from NX Eagle to GX and think they also need to upgrade the freehub to use GX (xD) cassettes. Totally not true.
#10
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
How thinly can you slice the baloney?
Campy, Shimano and Sram all want to extract the maximum revenue from each rider. The way they do this is by offering components in a range of prices. The more expensive ones really are nicer but, honestly, even the cheap stuff still works pretty well. In general, performance improves linearly while price increases exponentially. Everybody gets to decide their own performance/price sweet spot. My personal sweet spot keeps drifting toward the lower end offerings.
Campy, Shimano and Sram all want to extract the maximum revenue from each rider. The way they do this is by offering components in a range of prices. The more expensive ones really are nicer but, honestly, even the cheap stuff still works pretty well. In general, performance improves linearly while price increases exponentially. Everybody gets to decide their own performance/price sweet spot. My personal sweet spot keeps drifting toward the lower end offerings.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#11
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
the groupset is how manufacturers differentiate certain levels of quality and use. Like someone who is a pro racer would want extremely light and good XTR hubs, brakes, crank and RD and so on. nothing really stops you from mixing or using other manufacturers where possible (i.e. you can use a RF crank with SRAM Rd etc.). It is reasonable to assume that someone who has an Altus RD isn't in need of an XTR crank.
The only thing that really needs to match are derailleurs and shifters that most often need to be from the same manufacturer. There are exception. but often you can mix different levels from the same manufacturer (i.e. NX RD and X01 shifter etc.).
Of course the manufacturers would love to have a bike equipped with everything from them. Part is marketing.
In many drivetrain discussions people seem to not understand that the number of speeds matters. For example, people argue over upgrading from NX Eagle to GX and think they also need to upgrade the freehub to use GX (xD) cassettes. Totally not true.
The only thing that really needs to match are derailleurs and shifters that most often need to be from the same manufacturer. There are exception. but often you can mix different levels from the same manufacturer (i.e. NX RD and X01 shifter etc.).
Of course the manufacturers would love to have a bike equipped with everything from them. Part is marketing.
In many drivetrain discussions people seem to not understand that the number of speeds matters. For example, people argue over upgrading from NX Eagle to GX and think they also need to upgrade the freehub to use GX (xD) cassettes. Totally not true.
They've openly had incompatible tiers within the same MY pretty much this entire millennium, as a means of upselling and tier differentiation (combined with different mechanisms like the awful "Escape"). It has gotten so bad and byzantine what with all the different cable-pulls and what not, that in 2015 they started stamping "LETTER" (e.g. "A" to denote 2015+ Chorus compatible and up) to try and make what does and doesn't work remotely knowable by someone not a professional Campagnolo historian.
#12
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,678
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 228 Times
in
138 Posts
My 83 Team Fuji came new with Suntour derailleurs, a Sugino crankset, and Gran Comp brakes, so I don't think having a complete groupset was ever a big deal except on high end stuff.
My CF Ridley does have a complete Force 22 groupset, but it was a Competitive Cyclist build bike.
My CF Ridley does have a complete Force 22 groupset, but it was a Competitive Cyclist build bike.
#13
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,637
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4736 Post(s)
Liked 1,532 Times
in
1,003 Posts
How thinly can you slice the baloney?
Campy, Shimano and Sram all want to extract the maximum revenue from each rider. The way they do this is by offering components in a range of prices. The more expensive ones really are nicer but, honestly, even the cheap stuff still works pretty well. In general, performance improves linearly while price increases exponentially. Everybody gets to decide their own performance/price sweet spot. My personal sweet spot keeps drifting toward the lower end offerings.
Campy, Shimano and Sram all want to extract the maximum revenue from each rider. The way they do this is by offering components in a range of prices. The more expensive ones really are nicer but, honestly, even the cheap stuff still works pretty well. In general, performance improves linearly while price increases exponentially. Everybody gets to decide their own performance/price sweet spot. My personal sweet spot keeps drifting toward the lower end offerings.
#14
Cycleway town
I've always known them mixed on account of importance. Like low end pedals or discs, knowing the customer is likely to upgrade those parts.
We've seen the same with steel wheels on a Miata and BMW's without a radio.
And at the low end, they'll throw on a posh rear derailleur to get the sale on a mediocre frame, but not bother so much with BB or hubs.
We've seen the same with steel wheels on a Miata and BMW's without a radio.
And at the low end, they'll throw on a posh rear derailleur to get the sale on a mediocre frame, but not bother so much with BB or hubs.
#15
Heft On Wheels
Join Date: Nov 2014
Location: South Dakota
Posts: 3,123
Bikes: Specialized,Cannondale,Argon 18
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times
in
346 Posts
I still have a hard time upgrading or buying anything higher than 105 lol...
Mixing stuff is a great way to keep on rolling on a budget. Buy what you can find used or old stock. I do this on ebay when I need parts. I rarely buy latest and greatest just to save the cash.
Mixing stuff is a great way to keep on rolling on a budget. Buy what you can find used or old stock. I do this on ebay when I need parts. I rarely buy latest and greatest just to save the cash.
#16
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,391
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,974 Times
in
1,919 Posts
Grouping like parts takes most of the guesswork out when meshing parts together.
I will be first to admit that I will try oddball parts with other components. The risk is that you may create a dysfunction with the operation/use that you the installer might only be able to address or is willing to deal with.
The cable pull ratio between road & mountain bicycle parts is an experience I can say I've had to address. The fix for it in the end was just going with the specific category for the intended parts.
Did I know what I was getting myself into? Somewhat, but not entirely at that time. I did take some good information away in doing the trial & error.
If you can risk the effort, time, costs, & all else that comes with trying out things, why not give it a shot? Otherwise, stay with the cookie cutter design of group sets.
I will be first to admit that I will try oddball parts with other components. The risk is that you may create a dysfunction with the operation/use that you the installer might only be able to address or is willing to deal with.
The cable pull ratio between road & mountain bicycle parts is an experience I can say I've had to address. The fix for it in the end was just going with the specific category for the intended parts.
Did I know what I was getting myself into? Somewhat, but not entirely at that time. I did take some good information away in doing the trial & error.
If you can risk the effort, time, costs, & all else that comes with trying out things, why not give it a shot? Otherwise, stay with the cookie cutter design of group sets.
__________________
-Oh Hey!
-Oh Hey!
#17
Lopsided biped
Join Date: Nov 2017
Location: NE Ohio
Posts: 737
Bikes: 2017 Day 6 Cyclone (the Buick); 2015 Simcoe Deluxe (the Xebec); Street Strider 3i (the not-a-bike); GreenSpeed Anura (the Black Swan)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 316 Post(s)
Liked 160 Times
in
97 Posts
I recently upgraded the transmission on my not-a-bike (Street Strider) from 3-speed to 8-speed, using a whole rear wheel I bought from Terra Trike. I didn't want the twist-grip shifter, so bought one off Amazon, but it's not listed as being compatible with that hub. It's an Alfine shifter, and I have the Nexus Inter-8 hub. However, reviewers on Amazon said they had paired it up with the Inter-8 and it worked fine--and it does.
#18
100% Certified Beast
Thread Starter
Join Date: Nov 2010
Location: Arctic (Near Russia)
Posts: 321
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
I have a bunch of road specific rear derailleurs that I no longer use. All my road bikes use MTB rear derailleurs. They seem more technically advanced, shift better, can accommodate bigger cassettes, and cheaper when purchased in used condition. It seems weird but road parts are more expensive in my experience buying them mostly secondhand but have received very little technical innovation that MTB parts have received over the years.
#19
100% Certified Beast
Thread Starter
Join Date: Nov 2010
Location: Arctic (Near Russia)
Posts: 321
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
It makes less sense now more than ever. The newer Tiagra and even Sora stuff look very 105-ish compared to a few years ago.
This is Sora R3000 9 speed
This is Sora R3000 9 speed
Likes For Obeast:
#20
Banned
STI = Shimano Total Integration ... before indexing, friction shifting era, Mixing worked fine,
but marketing wished to convince you otherwise..
now , mixed components are more about cost.. a FSA crank may be offering OEM a better lot sized deal than Shimano..
and so leeps the selling price more attractive to the customer... for the whole bike..
...
but marketing wished to convince you otherwise..
now , mixed components are more about cost.. a FSA crank may be offering OEM a better lot sized deal than Shimano..
and so leeps the selling price more attractive to the customer... for the whole bike..
...
#22
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
from Disraeli Gears: "From 1969 until (probably) the early 1990’s Sugino was part of the JEX group (Japan Bicycle Parts Manufacturers Group for Export Promotion) along with SunTour, Dia Compe and a number of other companies. In many ways, SunTour acted as the locomotive in the JEX group, designing groupsets and sourcing the brakes from Dia Compe, the chainset from Sugino etc. etc.."
#23
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
As others have said above, if I'm building from the frame up, then the groupset is matching.
If I'm repairing or returning some bike to use, then the replaced component is merely functioning.
If I'm repairing or returning some bike to use, then the replaced component is merely functioning.
#24
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,241
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10171 Post(s)
Liked 5,867 Times
in
3,157 Posts
#25
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,614
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10964 Post(s)
Liked 7,491 Times
in
4,189 Posts
Is "groupset" an outdated concept that only mfgs are pushing?
except for shifters and possibly matching derailleurs I have mixed tons of stuff across brands and speeds and they all work fine. The front derailleur can be swapped across brands and even between speeds and they work fine. Same for most Shimano rear derailleurs. As a last resort, I put on a 7 or 8 speed thumb friction shifter and it shifts everything from 8 to 12 speeds in the rear.
except for shifters and possibly matching derailleurs I have mixed tons of stuff across brands and speeds and they all work fine. The front derailleur can be swapped across brands and even between speeds and they work fine. Same for most Shimano rear derailleurs. As a last resort, I put on a 7 or 8 speed thumb friction shifter and it shifts everything from 8 to 12 speeds in the rear.
The next most common approach is to use a higher spec rear derailleur with an otherwise lower group- so an Ultegra RD with an otherwise 105 drivetrain. The theory being that the name on the RD is easily seen and recognized as an upgrade.
Then there are the non-series components that get added in as cost savings. Still really quality stuff, but it just isnt part of a group. Cranksets and shifters are most common, followed by brake calipers, from what I see.
So while a groupset is a default approach to OEM bikes, you need to recognize that a large % of OEM actually isnt a full groupset even right now. MFGs dont push groupsets, they push components that will get the most bang for their buck at designated price points.
Super to hear you mix components- pretty much any tinkerer does that too. As long as you play within the established rules for given coponents, everything works fine.
That doesnt mean groupsets should be eliminated or that bike brands are pushing groupsets to exist.
As for your last resort of throwing a friction thumb shifter on anything and it working...well ok, but i dont think that is a solution that most would want to entertain since its janky as can be.
Your threads are...interesting.