Today I (v2):
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
Yeah, that's what I'm going to do. I just don't understand why these companies can't make a mount that doesn't break. Both of the mounts I've had break on me have been ones that were designed to allow the headlight to swivel on its mount, which in my opinion is a completely pointless feature that only causes problems.
Yeah, that's what I'm going to do. I just don't understand why these companies can't make a mount that doesn't break. Both of the mounts I've had break on me have been ones that were designed to allow the headlight to swivel on its mount, which in my opinion is a completely pointless feature that only causes problems.
Dave
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
No screw. Mine is a Light & Motion -- it has like a protruding disc on the bottom of the light that slides into the handlebar mount. That part snapped when I was putting it on last night. At least it didn't break while I was riding like my Axiom light did before (literally hit a bump and the thing snapped and flew off). Funny enough, the most reliable headlight I've ever owned when it comes to stuff like this is one that I got for like $20 at Target. Problem with that one is it's not bright enough to light up a dark road at night.
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 15,076
Bikes: road, track, mtb
Liked 3,883 Times
in
2,030 Posts
I'm a fan of the Go-Pro style mounts. If you ride with a NiteRider Lumina series light, they make a great adapter so that everything is secured with allen key bolts. I have this setup on two of my bikes:
On the MTB I don't like to have my Garmin sticking out front like that or just usually don't bother with the Garmin at all. On that bike I simply have one of these which is the same interface as above:
In general I really like K-Edge products. Check them out if you are looking into cyclocomputer, light or Go-Pro mounting options.
On the MTB I don't like to have my Garmin sticking out front like that or just usually don't bother with the Garmin at all. On that bike I simply have one of these which is the same interface as above:
In general I really like K-Edge products. Check them out if you are looking into cyclocomputer, light or Go-Pro mounting options.
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
Thanks for the tip, I'll look into those.
Well, I got out of the hospital today.
My body went haywire around 11:00 PM Tuesday and by 2:00 AM I could not lift myself from the floor to the sofa and was dry heaving uncontrollably and shaking/shivering violently. I had my daughter call 911 and by 4:00 AM I was in the ER hooked to an IV. Oxygen was 90% so they kept me overnight.
A side effect of anti nausia meds is drowsiness and it was a godsend. I slept on and off for about 30 hours. My calendar is clear through the weekend.
I encourage anyone with any symptoms to get to the doctor right away and get tested.
-Tim-
My body went haywire around 11:00 PM Tuesday and by 2:00 AM I could not lift myself from the floor to the sofa and was dry heaving uncontrollably and shaking/shivering violently. I had my daughter call 911 and by 4:00 AM I was in the ER hooked to an IV. Oxygen was 90% so they kept me overnight.
A side effect of anti nausia meds is drowsiness and it was a godsend. I slept on and off for about 30 hours. My calendar is clear through the weekend.
I encourage anyone with any symptoms to get to the doctor right away and get tested.
-Tim-
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
Senior Member
Join Date: Nov 2005
Location: Arlington, TX
Posts: 1,414
Bikes: 2008 Surly Cross Check, 2010 Fuji Track Comp
Likes: 0
Liked 2 Times
in
2 Posts
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
Did you guys break the mount that attaches to the bar or the GoPro adapter which attaches at the light/camera?
Senior Member
Join Date: Nov 2005
Location: Arlington, TX
Posts: 1,414
Bikes: 2008 Surly Cross Check, 2010 Fuji Track Comp
Likes: 0
Liked 2 Times
in
2 Posts
In my case the part that broke is the little adapt-a-gazoink that goes between the bar-clip and the camera itself. A cheap part, but a part that shouldn't break that easily.
Calamari Marionette Ph.D
My GoPro mount proved to be no match for chip'n'seal roads. It vibrated so much it snapped off. The camera itself survived just fine, leaving me with an interesting bit of video.
https://www.youtube.com/watch?v=kRc_5UHF7nA
https://www.youtube.com/watch?v=kRc_5UHF7nA
Ha ha ha. It looks like a HORRIBLE crash.
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
I have lots of GoPro mounted stuff and use it for gravel all the time. Maybe I've just been lucky?
-Tim-
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Liked 131 Times
in
47 Posts
Rode my bike last night despite:
having to put my chain back on and lube it
find tools to put in my seat bag
swap seat bag between bikes
pumping up tires
it being wet and icy
it being 25 degrees and windy
Front light nearly dead
rear light dying shortly after leaving
As rides go, it kinda sucked, but also really needed to happen.
having to put my chain back on and lube it
find tools to put in my seat bag
swap seat bag between bikes
pumping up tires
it being wet and icy
it being 25 degrees and windy
Front light nearly dead
rear light dying shortly after leaving
As rides go, it kinda sucked, but also really needed to happen.
Calamari Marionette Ph.D
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
When you start to wonder, "What the heck made me thing this was a good idea?"
-Tim-
-Tim-
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
Rode my bike last night despite:
having to put my chain back on and lube it
find tools to put in my seat bag
swap seat bag between bikes
pumping up tires
it being wet and icy
it being 25 degrees and windy
Front light nearly dead
rear light dying shortly after leaving
As rides go, it kinda sucked, but also really needed to happen.
having to put my chain back on and lube it
find tools to put in my seat bag
swap seat bag between bikes
pumping up tires
it being wet and icy
it being 25 degrees and windy
Front light nearly dead
rear light dying shortly after leaving
As rides go, it kinda sucked, but also really needed to happen.
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 15,076
Bikes: road, track, mtb
Liked 3,883 Times
in
2,030 Posts
I've definitely regretted going on a ride before lol
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 15,076
Bikes: road, track, mtb
Liked 3,883 Times
in
2,030 Posts
Not this morning though, road my fixie road bike (42/15) for 90 minutes before work. Tried to keep my HR in my tempo zone for most of it. A tough workout yesterday made my legs a bit sore but I felt good and it was nice to feel some cool morning air.
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
Did 24 miles today. Boring ride, but just had to get the blood flowing again. Haven't been doing much riding this month and the effects are noticeable to say the least.
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Liked 131 Times
in
47 Posts
...and to top it off, I walked out to my garage this morning to find the bike has flat front tire.
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 15,076
Bikes: road, track, mtb
Liked 3,883 Times
in
2,030 Posts
Sorry to be a party pooper lol. I do appreciate the sentiment of the quote, however
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
I lived on a road that was chip'n'sealed for a while when I was younger. A fresh chip'n'seal job is the smelliest, messiest, most annoying thing ever... especially for cars.