Keep Your Black Tires Black
#1
Newbie
Thread Starter
Join Date: May 2011
Location: Florida
Posts: 28
Bikes: 2019 Specialized Tarmac SL6
Likes: 0
Liked 12 Times
in
8 Posts
Keep Your Black Tires Black
I cleaned my wife's Cannondale hybrid a few weekends ago and the results were amazing. Her black Continental Gatorskins were browning from UV and dirt. When I was done she had black silky smooth tires. Added grip is a byproduct. Simple all that I did was to hose down the tire, spray liberally with Ru-Glyde, brush with a nylon tire brush, rinse and wipe with a microfiber.
I use Ru-Glyde as a lube to install tight tires, can also be used to make rubber look new again. $16/gallon at auto parts store is a great value.
I use Ru-Glyde as a lube to install tight tires, can also be used to make rubber look new again. $16/gallon at auto parts store is a great value.
Last edited by crklein3; 01-16-24 at 09:47 AM. Reason: format
Likes For crklein3:
#2
Senior Member
I fail to grasp how applying a rubber lubricant to the tires provides added grip.
Did you get any on the brake pads? How good are they now?
Did you get any on the brake pads? How good are they now?
Likes For Bald Paul:
#3
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,768
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,844 Times
in
1,182 Posts
A clean bicycle goes faster...
After cleaning my bikes I spray the entire bike with ArmourAll tire foam. I then judiciously wipe it all off...
After cleaning my bikes I spray the entire bike with ArmourAll tire foam. I then judiciously wipe it all off...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#4
Senior Member
Join Date: Jan 2007
Location: Eastern VA
Posts: 1,816
Bikes: 2022 Fuel EX 8, 2021 Domane SL6, Black Beta (Nashbar frame), 2004 Trek 1000C for the trainer
Liked 580 Times
in
305 Posts
I would just worry about and on the tread making it slippery. Take care for a few miles. I use Ru Glide for mounting motorcycle tires. It does seem to dry and not be as slippery as Amour all.
#6
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,950
Bikes: Bikey McBike Face
Liked 6,608 Times
in
3,342 Posts
Reminds me of a guy with a new sports car that decided to ArmorAll not only the sidewalls but the treads. He immediately took the car out and goosed it around a corner, the car immediately started an uncontrollable slide and totaled it.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#7
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 26,249
Liked 10,164 Times
in
4,938 Posts
Reminds me of a guy with a new sports car that decided to ArmorAll not only the sidewalls but the treads. He immediately took the car out and goosed it around a corner, the car immediately started an uncontrollable slide and totaled it.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
I've heard the stuff on new tires to release them from the mold is slippery when wet.
#8
Senior Member
Join Date: Jan 2013
Posts: 2,831
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 677 Times
in
464 Posts
I use Aerospace 303 on RV and my bike collection, helps appearance and arrest cracking and no noticeable impact on the tire to road adhesion.
Likes For easyupbug:
#9
Senior Member
I've used tire shine (ironically the low-shine) liberally on all of my cars/trucks and never felt the slightest bit of traction loss. Okay sure, if you slather up the treads in the pits and hit the track, that may backfire. But come on, who's pulling 1g out of their driveway. That 4,000 lbs car will scrub of any slime in about 50'.
The big concern with adding anything to a bike tire is the brakes - those with rim brakes (like the one we're discussing). I detail my bikes like the car guy I am (yeah, ceramic coating on the frame, shut up) but I stop at the tires.
The big concern with adding anything to a bike tire is the brakes - those with rim brakes (like the one we're discussing). I detail my bikes like the car guy I am (yeah, ceramic coating on the frame, shut up) but I stop at the tires.
#10
Senior Member
But my bike picks up too much dust. I am sure even the low-shine stuff would turn brown soon enough from the dust where I live.
#11
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,510
Bikes: Scott Addict R1, Felt Z1
Liked 4,059 Times
in
1,999 Posts
That brown stuff on your tire sidewalls is evidence that the UV/oxidation protection in the rubber compound is working.
Aggressively cleaning tires can remove this protective material. I would avoid doing much tire cleaning, other than rinsing off the mud.
As for spray on additives, skip 'em.
Aggressively cleaning tires can remove this protective material. I would avoid doing much tire cleaning, other than rinsing off the mud.
As for spray on additives, skip 'em.
#12
#13
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,475
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Liked 893 Times
in
458 Posts
You’re supposed to clean your bike? Personally, I don’t want to destroy the patina
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
Likes For merlinextraligh:
#14
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,481
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Liked 2,753 Times
in
1,280 Posts
Reminds me of a guy with a new sports car that decided to ArmorAll not only the sidewalls but the treads. He immediately took the car out and goosed it around a corner, the car immediately started an uncontrollable slide and totaled it.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
Not saying this will happen to the OP, but I would recommend taking a rag with rubbing alcohol and going over the tread areas - just to be sure. Otherwise, the tires look good.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
Likes For Chuck M:
#15
During the winter time, I simply shake off the snow and whatever else it might have picked in it from the bike before putting it in the garage. Every so often, when it starts looking like it may salt on it, I hose it off with water and dry it with a towel (reserved for bikes only). That’s about it… no shining tires or anything else. I only try to get rid of salt in the winter time.
#17
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,950
Bikes: Bikey McBike Face
Liked 6,608 Times
in
3,342 Posts
I use it on my wiper blades to prolong their service life as well on dash and weatherstripping. Since my Conti GP5000s side walls start cracking before their tread is gone, I may just give the sidewalls (only) the treatment.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#18
Newbie
Thread Starter
Join Date: May 2011
Location: Florida
Posts: 28
Bikes: 2019 Specialized Tarmac SL6
Likes: 0
Liked 12 Times
in
8 Posts
A lot of posters are missing the point. You don't want any tire dressing on any part of a bike tire. Bicycle/motorcycle tires use their sidewall for traction when cornering. The Ru-Glyde is not a dressing but a cleaner. Leaves nothing behind. No shine, just a clean new looking tire. Remember the last step is to wipe completely with a wet wash cloth to make sure there is no residue remaining..
#19
Senior Member
Join Date: Jan 2013
Posts: 2,831
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 677 Times
in
464 Posts
Likes For cweb99:
#22
Newbie
Thread Starter
Join Date: May 2011
Location: Florida
Posts: 28
Bikes: 2019 Specialized Tarmac SL6
Likes: 0
Liked 12 Times
in
8 Posts
I find this unusual as all tires "use their sidewall for traction when cornering." I am aware of issues with motorcyclists that use oil based lubricants like Armor All which attack the rubber molecular structure when used to dress tires. However, Aerospace is water based without any petroleum distillates, alcohol, mineral oil or harmful silicone oils and has been used on our Snowbird RVs in AZ for over 30 years w/o issue.
Likes For crklein3:
#24
Senior Member
"all that I did was to hose down the tire, spray liberally with Ru-Glyde, brush with a nylon tire brush, rinse and wipe with a microfiber."
#25
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,768
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,844 Times
in
1,182 Posts
https://www.mcgeecompany.com/wp-conte...0_Ru_Glyde.pdf
OSHA may have this product on their hit list for 2024. So far its not listed as a hazardous waste. But in some states the Sodium dichromate, dihydrate and the Ethylene glycol are a No, No.
Many of us remember the days of Tetraethyllead and R22. Rats... Looks like we might loose another one...
OSHA may have this product on their hit list for 2024. So far its not listed as a hazardous waste. But in some states the Sodium dichromate, dihydrate and the Ethylene glycol are a No, No.
Many of us remember the days of Tetraethyllead and R22. Rats... Looks like we might loose another one...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Last edited by zandoval; 01-29-24 at 11:48 PM.