Track Nuts That Take an Allen Wrench
#26
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,760
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1337 Post(s)
Liked 766 Times
in
432 Posts
More than likely something is wrong with your setup. Can you post a closeup pic of your rear dropout area? Are you using a nut with a built-in floating washer, preferably serrated? Steel or aluminum frame?
#27
K2ProFlex baby!
Join Date: Feb 2007
Location: My response would have been something along the lines of: "Does your bike have computer controlled suspension? Then shut your piehole, this baby is from the future!"
Posts: 6,133
Bikes: to many to list
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 56 Times
in
31 Posts
Many many years ago when I had mt first FG I had a set of "Eagle?" hubs that came with the alen wrench bolts, not to sure of the name though as it was a loooooong time ago.
__________________
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
#28
Newbie
Join Date: Sep 2009
Location: Charlotte
Posts: 3
Bikes: Cannondale R400S, Hercules convert Fixie.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey actually there is a place to buy allen skewers. I am in the process of building my first fixie right now and I found the skewers while searching for rims. If you go to Halorims.com and look under road products, they sell colored hex skewers.
#29
Senior Member
Join Date: Mar 2009
Location: Nova Scotia
Posts: 855
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You can get allen skewers anywhere, but they'll probably just break and leave you stranded if you use them for your rear wheel. Mine did, and it was chromoly steel. Just go quick-release if you don't want to carry a damn wrench. That's what they're for.
#30
Senior Member
Join Date: Feb 2009
Posts: 658
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#31
Real Men Ride Ordinaries
Join Date: Sep 2008
Posts: 3,723
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
you are aware that it is perfectly doable to use a quick release on a fixed gear bicycle? With no ill consequences in fact. I have to run, but I'll let others finish dispelling this myth.
#33
THE STUFFED
Join Date: Oct 2009
Location: San Francisco, CA
Posts: 12,671
Bikes: R. Sachs Road; EAI Bareknuckle; S-Works Enduro
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 361 Post(s)
Likes: 0
Liked 20 Times
in
17 Posts
Well... if you want to use one of those really bad on your fixie you can always use one one only on the front with a road hub/wheel; but not the rear, so you're still stuck carrying that 15mm wrench......
But there's always the nice felt beer nuts tool that can go easily on water bottle cage bosses....
You can also always hide a 15mm wrench under your saddle if there's room.....
But there's always the nice felt beer nuts tool that can go easily on water bottle cage bosses....
You can also always hide a 15mm wrench under your saddle if there's room.....
#34
Still kicking.
Just get one of these....
https://www.ridepdw.com/goods/tools/3wrenchoraw
I get a fair amount of use out of mine.
https://www.ridepdw.com/goods/tools/3wrenchoraw
I get a fair amount of use out of mine.
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#35
Fresh Garbage
Just get one of these....
https://www.ridepdw.com/goods/tools/3wrenchoraw
I get a fair amount of use out of mine.
https://www.ridepdw.com/goods/tools/3wrenchoraw
I get a fair amount of use out of mine.
#36
Still kicking.
Won't have to carry tire levers....
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#39
Still kicking.
This is coming from the same guy(me) who lugs his tools in his camelback.
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#40
Your cog is slipping.
I usually have more tools than are even necessary in my bag (not on purpose...they just all seem to end up there!), so someone complaining about having to carry a little wrench seems kinda funny.
#44
Senior Member
Join Date: Feb 2009
Posts: 658
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Interesting. I stand corrected. Not going to do it myself, but Sheldon's usually right about this stuff.
#45
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,760
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1337 Post(s)
Liked 766 Times
in
432 Posts
https://www.sheldonbrown.com/fixed-conversion.html
Interesting. I stand corrected. Not going to do it myself, but Sheldon's usually right about this stuff.
Interesting. I stand corrected. Not going to do it myself, but Sheldon's usually right about this stuff.
#46
Senior Member
Join Date: Nov 2004
Location: Between the mountains and the lake.
Posts: 16,681
Bikes: 8 bikes - one for each day of the week!
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Not to pick on TT any more, but I have an allen nut on me right now. Seems I stripped my seatpost binder bolt. So I have the allen bolt and allen nut, and need to make a trip to my LBS.
#47
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,760
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1337 Post(s)
Liked 766 Times
in
432 Posts
Is it a Campy seat binder bolt and nut set? If so, only the bolt part has a hex socket and the nut part is round. Also, the nut part has a ridge to fit into the frame seat binder ear, so that it won't turn when you tighten the bolt part with an allen wrench. You are supposed to tighten the bolt, not the nut. Anyway, you've already made your point, so I presume you're just doing this in a vain attempt to get a rise out of me.
#48
Senior Member
Join Date: Nov 2004
Location: Between the mountains and the lake.
Posts: 16,681
Bikes: 8 bikes - one for each day of the week!
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Is it working?
I just think that your blanket statement about allen nuts needed clarification.
"No such thing as an allen nut. A "nut" is an internally threaded fastener that mates with an externally threaded item such as a solid axle. A "nut" has the wrench flats on the outside. An "allen" fastener is externally threaded with internal wrench flats and is technically a "bolt". You cannot connect two externally threaded fasteners (bolts)."
I just think that your blanket statement about allen nuts needed clarification.
"No such thing as an allen nut. A "nut" is an internally threaded fastener that mates with an externally threaded item such as a solid axle. A "nut" has the wrench flats on the outside. An "allen" fastener is externally threaded with internal wrench flats and is technically a "bolt". You cannot connect two externally threaded fasteners (bolts)."
#50
Senior Member
Join Date: Jan 2006
Location: LI, NY
Posts: 485
Bikes: A little of each
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 4 Times
in
2 Posts
i'd have to actually say that this 'allen nut' that you keep talking about would actually be classified as a chicago bolt. just sayin'.