Brooks saddles
#1
a77impala
Thread Starter
Brooks saddles
Here are two Brooks I replaced the leather with scraps bought at a saddle shop
#3
Fuji Fan
Have you gone riding with them yet? Any stretching? They look nice.
#4
a77impala
Thread Starter
I have ridden them both about 6 months, no stretching, the leather is 5mm thick. I formed them wet, soaked in warm water about 10 seconds.
#5
Fuji Fan
Do you remember what you costs were? Tools needed? What kind of brass rivet did you use for the black saddle? I have a beat Fujita saddle that may be up for a similar job, if it is cheap enough.
#6
a77impala
Thread Starter
Cost was about $10 for both saddles. Leather scrap large enough for both was $3, rivets were about 20 cents apiece for the steel and 40 cents each for the copper ones. Tools were sharp knife, leather hole punch, ball peen hammer, steel punch and flat steel surface to lay saddle on
to flatten rivets. I have an anvil.
I bought the rivets at local ACE hardware.
to flatten rivets. I have an anvil.
I bought the rivets at local ACE hardware.
#8
Fuji Fan
#9
perpetually frazzled
Join Date: Sep 2008
Location: Linton, IN
Posts: 2,467
Bikes: 1977 Bridgestone Kabuki Super Speed; 1979 Raleigh Professional; 1983 Raleigh Rapide mixte; 1974 Peugeot UO-8; 1993 Univega Activa Trail; 1972 Raleigh Sports; 1967 Phillips; 1981 Schwinn World Tourist; 1976 Schwinn LeTour mixte; 1964 Western Flyer
Likes: 0
Liked 7 Times
in
7 Posts
Got a bench vise? That would probably work...
#10
Senior Member
Join Date: Nov 2008
Location: South Jersey
Posts: 1,959
Bikes: Too many Bicycles to list
Liked 138 Times
in
45 Posts
Wow very nice, I have a very shot Brooks on a old Rudge I would like to try that on,I guess I could find the leather on line as I don't think there is a saddle shop in my parts anymore. My mother used to repair and make stuff for her saddles all the time and I got a bunch of her tools around here somewhere.
#16
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,107
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Liked 380 Times
in
181 Posts
Wow, thats cool.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#17
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,941
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Likes: 0
Liked 2,019 Times
in
1,065 Posts
Nice job and great inspiration, for a guy like me. I have often wondered how tough it would be to fabricate the leather for a Brooks. Based on your results, my guess is that a little practice, coupled with care, would produce pretty decent product in no time.
Plus, I have an additional incentive to pursue the saddle cover thing. My Dad left me his complete leather working tool set, patterns and some of the knowledge of how to cut and tool leather. I feel pretty confident that I can copy the Brooks logo, and embossed it on the leather, with little difficulty. It is the shaping and structural strength that has me worried. That said, I think I will give it a try. I do have a very large piece of heavy tooling leather(very thick) rolled up in plastic and resting in the rafters of The Old Shed. The tools are in there, somewhere, also.
Plus, I have an additional incentive to pursue the saddle cover thing. My Dad left me his complete leather working tool set, patterns and some of the knowledge of how to cut and tool leather. I feel pretty confident that I can copy the Brooks logo, and embossed it on the leather, with little difficulty. It is the shaping and structural strength that has me worried. That said, I think I will give it a try. I do have a very large piece of heavy tooling leather(very thick) rolled up in plastic and resting in the rafters of The Old Shed. The tools are in there, somewhere, also.
#18
Senior Member
Join Date: Aug 2007
Location: Western North Carolina
Posts: 434
Likes: 0
Liked 0 Times
in
0 Posts
#19
a77impala
Thread Starter
A form is not needed, the damp leather will shape by hand the way you want it, just don't stretch it to much. It will shrink a little when drying and get
as stiff as a new Brooks. It doesn't need to be soaking wet just damp way through.
A guy at the saddle shop said dampen the leather and put it a baggy overnight and it will be perfect to work with. I did not do this as he told me after
I was finished with mine.
Good Luck.
as stiff as a new Brooks. It doesn't need to be soaking wet just damp way through.
A guy at the saddle shop said dampen the leather and put it a baggy overnight and it will be perfect to work with. I did not do this as he told me after
I was finished with mine.
Good Luck.
#22
a77impala
Thread Starter
#24
Senior Member