looks like someone tried to drill my kryptonite new york fahgettaboudit keyhole
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: hi / sf
Posts: 92
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
looks like someone tried to drill my kryptonite new york fahgettaboudit keyhole
hey guys, i came to my bike today and it seems like someone might have tried to break my lock. i didn't notice my lock damage till later, but i did notice that when i came to my bike, it was sorta moved around on the rack. i didnt think anything of it at first. it wasn't until i rode to dinner and was about to lock my bike that i saw that the plastic keyhole cover was broken off. ive read that these things fall off easily but i just thought it was weird that my bike was moved around and my lock had damage. i took a closer look at the lock when i got home and i noticed that there were some metal shavings around the keyhole opening. also at the bottom of the inside, it looked like there was a drill attempt. i really can't tell if this is the case though because it doesn't look like there was any damage to the interior sides of the keyhole. i attached a few photos of what i thought looked like the drill damage. was a little tough to photograph, but check out the small circle dot at the bottom of the hole in the first two photos. it looks as if the drill hit the bottom of the hole and left a circular groove. also took photos of the shavings on the side, which could also be shavings from just using the key everyday? it did seem like when i put the key inside, it's now looser than it used to be, but that could also just be in my head.
is it common for this lock to break by drilling in the keyhole? if anyone has this lock, could you please take a look into the keyhole and see if you also have that circle at the bottom? just want to check if it's normal or if it really did get a drill to it. thank you!! i'm going to bring my bike into my office tomorrow morning.. i don't care if security tries to stop me.
is it common for this lock to break by drilling in the keyhole? if anyone has this lock, could you please take a look into the keyhole and see if you also have that circle at the bottom? just want to check if it's normal or if it really did get a drill to it. thank you!! i'm going to bring my bike into my office tomorrow morning.. i don't care if security tries to stop me.
Last edited by geej; 04-05-11 at 03:38 AM. Reason: explanation of drill groove
#2
Your cog is slipping.
A drill most likely would have done more damage. It looks like someone at least had at it with a screwdriver or something.
Last edited by Scrodzilla; 04-05-11 at 05:43 AM.
#3
Senior Member
Join Date: Jan 2006
Location: East coast
Posts: 2,671
Bikes: Specialized Tarmac Expert, Cannondale R700, Specialized Langster, Iron Horse Hollowpoint Team, Schwinn Homegrown
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is your bike parked in a place where someone would have time to go at the lock with a drill and nobody would see them and say anything? Sounds like you need a better place to park.
#5
Senior Member
Join Date: Jan 2006
Location: East coast
Posts: 2,671
Bikes: Specialized Tarmac Expert, Cannondale R700, Specialized Langster, Iron Horse Hollowpoint Team, Schwinn Homegrown
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#7
Fresh Garbage
#9
.
Join Date: Sep 2006
Posts: 3,860
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Facetious?
__________________
https://blicksbags.com/
https://blicksbags.com/
#10
Senior Member
Join Date: Sep 2010
Location: Sandy, OR
Posts: 182
Bikes: 96' lemond tourmalet, 11' leader 725tr
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
of all the locks a thief would try to take on, why the hell would they choose the bike using the kryptonite new york?! you must have one hell of a bike
#11
Senior Member
Join Date: Jan 2006
Location: East coast
Posts: 2,671
Bikes: Specialized Tarmac Expert, Cannondale R700, Specialized Langster, Iron Horse Hollowpoint Team, Schwinn Homegrown
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#12
Senior Member
Join Date: Sep 2010
Location: Oakland, CA
Posts: 214
Bikes: 2010 Wabi Lightning, 2014 Brompton S2L-X
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have that lock as well and it looks just like yours. It's normal because I haven't used this lock as much.
#15
rue the whirl
Join Date: Jul 2010
Location: Tallahassee, FL
Posts: 514
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#16
Senior Member
Join Date: Jun 2010
Location: Central Mexico
Posts: 616
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So he either lives in Japan or in another world because everyone steals bikes on planet earth. Except the Japanese.
Ever read those posts about people saying cyclists leave cervelos outside of coffee shops with no locks? Damn.
Ever read those posts about people saying cyclists leave cervelos outside of coffee shops with no locks? Damn.
#17
Junior Member
Join Date: Aug 2009
Location: Albuquerque, NM
Posts: 197
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I don't think it's been tampered with at all. I have the regular Kryptonite New York lock, and looks similar.
Hole
More hole
Metal filings
Hole
More hole
Metal filings
Last edited by buffalo_cody; 04-06-11 at 08:01 AM. Reason: pics
#18
Member
Join Date: May 2010
Location: Quebec
Posts: 27
Bikes: Pake 2009, Giant OCR2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Michael Scott: If there is one thing I hate more than the mafia it is a liar. I wish the mafia would go out and kill all the liars. Bury them in my yard. And I wouldn't tell the cops a thing. Not that I would be lying per se. But I would just get really quiet, all of a sudden.
Replace liar with thiefs and you will understand what I think about them
Replace liar with thiefs and you will understand what I think about them
#19
Senior Member
Join Date: May 2008
Posts: 288
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Go grab a drill and stick it in a new york lock. the top disc (the one that is visible) will spin about and not be harmed. that's one of the reasons disc cylinder locks are so nice is because they're protected by that floating plate at the keyhole, it keeps a drill bit from being able to grab hold.