ISO and For Trade thread parts 2 and 3.
#8751
Senior Member
Join Date: Mar 2012
Posts: 271
Likes: 0
Liked 0 Times
in
0 Posts
Hi Everyone, I am looking for a bottom bracket 113 italian thread its all I need to start putting this bicycle together. I have collected everything else
#8752
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,009
Bikes: Too many to list here check my signature.
Liked 3,096 Times
in
1,578 Posts
Beautiful frame. What kind of crank are you using? Does the spindel need to be symetrical or asymetrical to the drive side?
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#8753
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,009
Bikes: Too many to list here check my signature.
Liked 3,096 Times
in
1,578 Posts
ISO: Pannier hooks. does anyone have any laying around or know a shop with a small stack not being used? I think there was a link to a site that sold them but I can't find it. I am looking for the small hooks that attach to the bottom of the rack and hook the older style Cdale bags on them before hooking the top. They are just little stainless hooks about an inch long.
Have to trade: a VGC Brooks black Imperial laced with black, that I would love to trade for a VGC B-17 Standard
I still have one pair of uber low milage, 100 or so, Pasela TG wire bead x32 TAN tires to trade for x25s in TAN
Have to trade: a VGC Brooks black Imperial laced with black, that I would love to trade for a VGC B-17 Standard
I still have one pair of uber low milage, 100 or so, Pasela TG wire bead x32 TAN tires to trade for x25s in TAN
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#8755
BG, let me check when I get home. Might have a couple of those hooks & if so you can have them for the cost of postage. They may even have come from a Cannondale.
Jonaschwinn, let me know if you can use a 115 Italian with Japanese-type spindle ends (e.g. fits Shimano/Sugino/Suntour/Sakae). I have one new and one used Shimano sealed cartridge UN54 but they won't fit Campy.
Jonaschwinn, let me know if you can use a 115 Italian with Japanese-type spindle ends (e.g. fits Shimano/Sugino/Suntour/Sakae). I have one new and one used Shimano sealed cartridge UN54 but they won't fit Campy.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#8757
Senior Member
Join Date: Oct 2006
Location: Illinois
Posts: 539
Bikes: No bike at the moment; In process of building it.
Likes: 0
Liked 0 Times
in
0 Posts
1. ISO Bridgestone RB-1 with a 50cm top-tube! Preferably red from the 1991-1992 era. One with a 53cm top-tube just sold on ebay recently...while I cried myself to sleep.
1b. A STEEL 50cm top-tube frameset from one of the following manufacturer's...Cinelli, Ciocc, Gios, Basso, Eddy Merckx (this especially), Miyata, Nishiki or any others from this era'ish.
2. Dura-Ace 7400 crankset dust caps; the ones that say "dura-ace" twice along the perimeter of the cap. So hard to find by themselves.
2b. I am willing to buy a Dura-Ace 7400 crankset that INCLUDES the dust caps if someone doesn't want to part a crankset out.
EDIT: 51cm top-tubes are ok as well.
1b. A STEEL 50cm top-tube frameset from one of the following manufacturer's...Cinelli, Ciocc, Gios, Basso, Eddy Merckx (this especially), Miyata, Nishiki or any others from this era'ish.
2. Dura-Ace 7400 crankset dust caps; the ones that say "dura-ace" twice along the perimeter of the cap. So hard to find by themselves.
2b. I am willing to buy a Dura-Ace 7400 crankset that INCLUDES the dust caps if someone doesn't want to part a crankset out.
EDIT: 51cm top-tubes are ok as well.
Last edited by Briareos; 06-25-12 at 03:58 PM.
#8758
Senior Member
Have:
1) Cinelli XA stem, black, 95mm, 26.4 clamp. Really clean, shop wear, doesn't look like it was really used.
2) Cinelli 64-42, early-80s Giro model, 26.4 clamp, no cable grooves. Very clean.
3) Dura-Ace brake levers circa mid-80s, non-aero style, used but nice, hoods are okay
4) Carradice SQR Slim. Used but not abused, works great, but I'm selling the bike it came on.
5) Schwinn World Sport 1988, with a few updates including nice new hand built wheels, brake system, and a couple of other things. Rough headset, but you won't notice it while riding.
6) SRAM Rival 172.5 cranks but with NO chainrings. New - one of the arms has the clear plastic still on it.
PMfor details, pics, questions.
Want:
Cinelli 1A stem, black or silver, 100mm, 26.4 clamp. Doesn't have to be pristine, but would like something relatively clean.
1) Cinelli XA stem, black, 95mm, 26.4 clamp. Really clean, shop wear, doesn't look like it was really used.
2) Cinelli 64-42, early-80s Giro model, 26.4 clamp, no cable grooves. Very clean.
3) Dura-Ace brake levers circa mid-80s, non-aero style, used but nice, hoods are okay
4) Carradice SQR Slim. Used but not abused, works great, but I'm selling the bike it came on.
5) Schwinn World Sport 1988, with a few updates including nice new hand built wheels, brake system, and a couple of other things. Rough headset, but you won't notice it while riding.
6) SRAM Rival 172.5 cranks but with NO chainrings. New - one of the arms has the clear plastic still on it.
PMfor details, pics, questions.
Want:
Cinelli 1A stem, black or silver, 100mm, 26.4 clamp. Doesn't have to be pristine, but would like something relatively clean.
Last edited by jeebusaurousrex; 06-25-12 at 02:20 PM.
#8759
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
1. ISO Bridgestone RB-1 with a 50cm top-tube! Preferably red from the 1991-1992 era. One with a 53cm top-tube just sold on ebay recently...while I cried myself to sleep.
1b. A STEEL 50cm top-tube frameset from one of the following manufacturer's...Cinelli, Ciocc, Gios, Basso, Eddy Merckx (this especially), Miyata, Nishiki or any others from this era'ish.
2. Dura-Ace 7400 crankset dust caps; the ones that say "dura-ace" twice along the perimeter of the cap. So hard to find by themselves.
2b. I am willing to [TRADE FOR] a Dura-Ace 7400 crankset that INCLUDES the dust caps if someone doesn't want to part a crankset out.
1b. A STEEL 50cm top-tube frameset from one of the following manufacturer's...Cinelli, Ciocc, Gios, Basso, Eddy Merckx (this especially), Miyata, Nishiki or any others from this era'ish.
2. Dura-Ace 7400 crankset dust caps; the ones that say "dura-ace" twice along the perimeter of the cap. So hard to find by themselves.
2b. I am willing to [TRADE FOR] a Dura-Ace 7400 crankset that INCLUDES the dust caps if someone doesn't want to part a crankset out.
#8761
Jack of all trades
Cinelli make a 26.4mm clamp:
https://www.ebay.com/sch/i.html?_nkw=...=&_osacat=7294
https://www.ebay.com/sch/i.html?_nkw=...=&_osacat=7294
#8762
Cinelli make a 26.4mm clamp:
https://www.ebay.com/sch/i.html?_nkw=...=&_osacat=7294
https://www.ebay.com/sch/i.html?_nkw=...=&_osacat=7294
#8765
Newbie
Join Date: Jun 2012
Posts: 2
Likes: 0
Liked 0 Times
in
0 Posts
Have:
1. 7-speed Suntour Command Shifters - NOS, according to previous owner. They look unused.
2. SR Royal seatpost - NIB, 26.8, fluted
3. DiaCompe 980 canti brakeset - I bought these for the rollers, intending to sell the rest to make up some of my $. Turns out the rollers were a bit larger than I wanted. Both rollers and brakes available.
4. Suntour Cyclone F/RD - polished, short cage versions, like this
5. Suntour Cyclone RD - 1st gen, black (like this)
6. 8s Shimano 105 partial groupset - brifters, wheels, and F/RD
7. 58cm Lotus Sprint - looks like a track training bike built for the road, but with track dropouts and factory drilled for brakes
8. Suntour Superbe Pro FD - braze on
9. Suntour Superbe Pro RD - friction-only model
Want:
1. Nice alloy bar/stem combo - Cinelli or Nitto Found
2. 10s Ultegra/DA cassette.
3. 10s Ultegra/DA brifters (maybe)
4. 10s DA downtube shifters
5. 6-speed Command Shifters
6. Garmin 605, 705, etc.
7. Sugino Super Mighty Compe track crankset - 165mm
1. 7-speed Suntour Command Shifters - NOS, according to previous owner. They look unused.
2. SR Royal seatpost - NIB, 26.8, fluted
3. DiaCompe 980 canti brakeset - I bought these for the rollers, intending to sell the rest to make up some of my $. Turns out the rollers were a bit larger than I wanted. Both rollers and brakes available.
4. Suntour Cyclone F/RD - polished, short cage versions, like this
5. Suntour Cyclone RD - 1st gen, black (like this)
6. 8s Shimano 105 partial groupset - brifters, wheels, and F/RD
7. 58cm Lotus Sprint - looks like a track training bike built for the road, but with track dropouts and factory drilled for brakes
8. Suntour Superbe Pro FD - braze on
9. Suntour Superbe Pro RD - friction-only model
Want:
1. Nice alloy bar/stem combo - Cinelli or Nitto Found
2. 10s Ultegra/DA cassette.
3. 10s Ultegra/DA brifters (maybe)
4. 10s DA downtube shifters
5. 6-speed Command Shifters
6. Garmin 605, 705, etc.
7. Sugino Super Mighty Compe track crankset - 165mm
#8766
Newbie
Join Date: Jun 2012
Posts: 2
Likes: 0
Liked 0 Times
in
0 Posts
Forgot some stuff!
HAVE:
New, unused Rivendell bar end shifter pods w/ or w/o shimano 9-sp index shifters (can friction shift too), shimano washers/ adapters
42cm Sakae road champion bars
Early 90s Shimano Exage aero brake levers with new black shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
The tires from the wheelset above-- 27x1.25" Panaracer Pasela Tourguard, kevlar bead, with maybe 100 mi on them
an extra chain whip
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of shimano downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
HAVE:
New, unused Rivendell bar end shifter pods w/ or w/o shimano 9-sp index shifters (can friction shift too), shimano washers/ adapters
42cm Sakae road champion bars
Early 90s Shimano Exage aero brake levers with new black shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
The tires from the wheelset above-- 27x1.25" Panaracer Pasela Tourguard, kevlar bead, with maybe 100 mi on them
an extra chain whip
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of shimano downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
#8768
ISO: early 70's Paramount head badge in fair to good condition
HAVE: various vintage pieces
thanks, nick
HAVE: various vintage pieces
thanks, nick
#8769
Senior Member
Join Date: Jun 2011
Location: Brookline MA
Posts: 434
Bikes: 1983 Trek 600, 1973 Mercian
Likes: 0
Liked 2 Times
in
2 Posts
My commuter bike's wheels are pretty much dead.
ISO: Nice, handbuilt, solid modern 700c Shimano wheelset.
Have: Most of a Campy NR group - Brakes, FD, RD, DT shifters, pedals, Strada crank, English BB (brakes have some small bits with corrosion/nonoriginal pads)
ISO: Nice, handbuilt, solid modern 700c Shimano wheelset.
Have: Most of a Campy NR group - Brakes, FD, RD, DT shifters, pedals, Strada crank, English BB (brakes have some small bits with corrosion/nonoriginal pads)
#8771
Senior Member
Want to buy:
Regina Oro 3, 4 of 5-speed freewheel. The large cog must be a 24, the rest don't matter. Must be screw-on cogs, splined cannot be used. If you just have the Regina 24-tooth cog, all the better. This cog will have left-hand threads. Looking at the image below, it is the "number 3" type of cog.
My stuff to trade tends to come from the 30s, 40s and 50s. If you don't like my stuff, I will pay strong.
Regina Oro 3, 4 of 5-speed freewheel. The large cog must be a 24, the rest don't matter. Must be screw-on cogs, splined cannot be used. If you just have the Regina 24-tooth cog, all the better. This cog will have left-hand threads. Looking at the image below, it is the "number 3" type of cog.
My stuff to trade tends to come from the 30s, 40s and 50s. If you don't like my stuff, I will pay strong.
#8772
Senior Member
Join Date: May 2012
Location: Nebraska
Posts: 250
Bikes: 1974 KoKo Sport 3000, 1987 Lotus Elite 600, 2003 Qunitana Roo Kilo tri
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Shimano STX-RC 8speed rear der
Shimano Thunderbird front der
Suntour Cyclone M-2 front der
Shimano Eagle rear der
333 stem shifter levers & brackets
Weinmann road levers(red dot)
Dia Compe suicide levers
Showa front & rear center pull brakes
Want:
19T fixed gear cog, threaded not cassette.
Dia Compe junior sized brake levers from mid 80's in silver.
Shimano STX-RC 8speed rear der
Shimano Thunderbird front der
Suntour Cyclone M-2 front der
Shimano Eagle rear der
333 stem shifter levers & brackets
Weinmann road levers(red dot)
Dia Compe suicide levers
Showa front & rear center pull brakes
Want:
19T fixed gear cog, threaded not cassette.
Dia Compe junior sized brake levers from mid 80's in silver.
#8773
Banned.
Want to buy:
Regina Oro 3, 4 of 5-speed freewheel. The large cog must be a 24, the rest don't matter. Must be screw-on cogs, splined cannot be used. If you just have the Regina 24-tooth cog, all the better. This cog will have left-hand threads. Looking at the image below, it is the "number 3" type of cog.
My stuff to trade tends to come from the 30s, 40s and 50s. If you don't like my stuff, I will pay strong.
Regina Oro 3, 4 of 5-speed freewheel. The large cog must be a 24, the rest don't matter. Must be screw-on cogs, splined cannot be used. If you just have the Regina 24-tooth cog, all the better. This cog will have left-hand threads. Looking at the image below, it is the "number 3" type of cog.
My stuff to trade tends to come from the 30s, 40s and 50s. If you don't like my stuff, I will pay strong.
#8774
Senior Member
Join Date: Sep 2010
Posts: 96
Likes: 0
Liked 0 Times
in
0 Posts
NEED:
- brake levers. (i have one, but it has no band clamp.)
- downtube shifters (7 speed or friction) frame has braze-ons
i don't need anything special. just the last pieces i need for a 80s bike i'm going to sell. i'd say it's a flip, but i'm not actually going to make money on it.
- compact square taper crankset (for cyclocross / mountain bike conversion)
HAVE:
tange english treaded bb - square taper
FSA 1in headset
6500 triple bb
4600 triple FD
generic 26.8 seatpost
generic alum drop bars
9 speed cassettes
8 speed campy cassette
truvativ triple crankset + BB
130mm ITM black stem 26/22.2
some other random bits.
- brake levers. (i have one, but it has no band clamp.)
- downtube shifters (7 speed or friction) frame has braze-ons
i don't need anything special. just the last pieces i need for a 80s bike i'm going to sell. i'd say it's a flip, but i'm not actually going to make money on it.
- compact square taper crankset (for cyclocross / mountain bike conversion)
HAVE:
tange english treaded bb - square taper
FSA 1in headset
6500 triple bb
4600 triple FD
generic 26.8 seatpost
generic alum drop bars
9 speed cassettes
8 speed campy cassette
truvativ triple crankset + BB
130mm ITM black stem 26/22.2
some other random bits.
Last edited by Odin99; 07-09-12 at 03:41 PM.
#8775
Butt-Nekid Wonder
Join Date: Jul 2010
Location: Portland,OR
Posts: 217
Bikes: 93' bridgestone rb-1
Likes: 0
Liked 0 Times
in
0 Posts
ISO: Shimano 600EX crankset preferably 175's but I'll go as small as 170's.
Have: 85' 40cm cannondale drop bars
another pair of 40cm bars off a bottechia
Pm me if you have one you're trying to get rid of
Have: 85' 40cm cannondale drop bars
another pair of 40cm bars off a bottechia
Pm me if you have one you're trying to get rid of
Last edited by zigmin; 06-28-12 at 09:33 PM.