anything i can do with this mangled Brooks B17?
#1
Member
Thread Starter
Join Date: May 2005
Location: Redondo Beach, CA
Posts: 46
Likes: 0
Liked 0 Times
in
0 Posts
anything i can do with this mangled Brooks B17?
Got knocked on the rear spokes by another rider and went flying. Bike smacked the pavement hard, ruining my two-month-old Brooks B17. Unfortunately I did not get the other rider's contact information. After dusting myself off, I thought it was just dislodged from the seatpost bracket, told him everything was a-ok and he rode off. Once I took it off I saw the mangled rails. Anyway is there anything I can do with this thing? Or am I saddled with just a hip cyclist's desk ornament?
#2
Senior Member
Join Date: Mar 2010
Location: City of Brotherly Love
Posts: 1,562
Bikes: Raleigh Companion, Nashbar Touring, Novara DiVano, Trek FX 7.1, Giant Upland
Likes: 0
Liked 0 Times
in
0 Posts
You can buy a new frame https://www.brooksengland.com/catalog...bly+-+BYB+297/ or attempt to straighten yours out. Either way you might need a few of these https://www.brooksengland.com/catalog...ia)+-+BYB+275/.
#5
Senior Member
Join Date: Dec 2006
Posts: 136
Likes: 0
Liked 0 Times
in
0 Posts
If you don't fancy the idea of buying a new frame, rivets, etc., you might contact Simon Firth, in Philly (hanfordcycles@gmail.com). He's now an appointed Brooks repair man for the US, and could, no doubt, fix it for you.
I've no idea how much he'd charge, but I don't suppose that it'd be anything like as expensive as sending it back here to UK for repair.
I've no idea how much he'd charge, but I don't suppose that it'd be anything like as expensive as sending it back here to UK for repair.
#7
+1
Clamp it back into the seatpost and straighten it out. Ask someone with more muscles than you or me, if necessary (I do that unashamedly, any time I realize my wimpy build is not enough for the task).
Hope you didn't get a concussion. Those tend to accumulate, and more than 3 or 4 in a lifetime can lead, with high likelihood, to an Alzheimer's-like dementia.
Clamp it back into the seatpost and straighten it out. Ask someone with more muscles than you or me, if necessary (I do that unashamedly, any time I realize my wimpy build is not enough for the task).
Hope you didn't get a concussion. Those tend to accumulate, and more than 3 or 4 in a lifetime can lead, with high likelihood, to an Alzheimer's-like dementia.
#9
Half way there
Join Date: May 2011
Location: Durham, NC
Posts: 1,109
Bikes: 69 Hercules, 73 Raleigh Sports, 74 Raliegh Competition, 78 Nishiki Professional, 79 Nishiki International, 83 Colnago Super, 83 Viner Junior
Likes: 0
Liked 1 Time
in
1 Post
-G
#10
Senior Member
Join Date: Aug 2012
Location: Buenos Aires, Argentina
Posts: 93
Bikes: 2012 Cannondale Flash Carbon 1, 1948 Raleigh Golden Arrow
Likes: 0
Liked 0 Times
in
0 Posts
Id say contact the repair dude and then tell us what he charges just in case. Or get the new frame. Those bars are practically impossible to bend back in shape, at least my mortals like us!
#11
#12
Banned
Its the standard basic model .. you can drill out the rivets, so separated
you can bend the frame back into shape, or buy a replacement frame.. .. then re rivet..
Pop-rivets will be so much easier, than hand hammered copper..
figure out what your time is worth.. vs just buying a new saddle..
you can bend the frame back into shape, or buy a replacement frame.. .. then re rivet..
Pop-rivets will be so much easier, than hand hammered copper..
figure out what your time is worth.. vs just buying a new saddle..
#13
Senior Member
#14
Half way there
Join Date: May 2011
Location: Durham, NC
Posts: 1,109
Bikes: 69 Hercules, 73 Raleigh Sports, 74 Raliegh Competition, 78 Nishiki Professional, 79 Nishiki International, 83 Colnago Super, 83 Viner Junior
Likes: 0
Liked 1 Time
in
1 Post
And if you decided to offer it up for sale, I'd be interested.
-G
-G
#15
Member
Thread Starter
Join Date: May 2005
Location: Redondo Beach, CA
Posts: 46
Likes: 0
Liked 0 Times
in
0 Posts
I was quoted a repair cost of $66, including $10 to ship it back to me in California. I will probably not go through with it.
So, I think I am interested in selling it as-is. The rails are very rigid (I'm scratching my head as to how the fall could have bent them that much) and I'm not too interested in the labor of pounding them back into shape…
And no concussion, wroomwroomoops, thanks for your concern. Head didn't touch the ground, I have a knack for this (same thing happened when I got hit by a car as a pedestrian in college).
So, I think I am interested in selling it as-is. The rails are very rigid (I'm scratching my head as to how the fall could have bent them that much) and I'm not too interested in the labor of pounding them back into shape…
And no concussion, wroomwroomoops, thanks for your concern. Head didn't touch the ground, I have a knack for this (same thing happened when I got hit by a car as a pedestrian in college).
Last edited by aoeuaoeu; 09-18-12 at 10:11 PM.
#16
Senior Member
I don’t know a lot about Brooks saddles, but it looks to me that the frame is racked not bent. That would explain why you feel the crash wasn’t forceful enough to bend the frame as much as it shows. I would be tempted to grab that nose block with an adjustable wrench and twist it around and see if it squared back up. It’s a little hard to see in your photos but at very least loosen up the tension screw and see if it starts going back to straight.
#17
Senior Member
Join Date: Dec 2006
Posts: 136
Likes: 0
Liked 0 Times
in
0 Posts
$66.00 certainly seems a lot for a simple job like that (including supply frame and rivets, of course). I charge only £12.50, inc. postage (usually about £2.20), here in UK, but trans-Atlantic shipping would almost certainly make this an uneconomic proposition for someone in US, I'm afraid.
At least I now know how much it'd cost 'nearer to home', for a US repair. I think Brooks charge $98.00 (inc. shipping).
At least I now know how much it'd cost 'nearer to home', for a US repair. I think Brooks charge $98.00 (inc. shipping).
Last edited by tony colegrave; 09-22-12 at 01:17 PM. Reason: mistake in original - asleep when posting
#18
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts