Water bottles
#26
Photographer
Just a follow up on this thread. I went ahead and purchased one of these bottles and it arrived yesterday. First, yes, it was expensive compared to a plastic bottle but I was looking for something that would compliment some of my nicer Japanese bikes. Wow, it's gorgeous and well crafted! The service and communication from Japan were excellent. Here's link with more photos that the seller sent me, I don't think they were on the original auction:
https://randonneur.jp/bottle/
Scott
https://randonneur.jp/bottle/
Scott
__________________
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
#27
Senior Member
I will use this when I finish the vodka, 9.99.
https://www.minibottlelibrary.com/mbl/alpha/kru-spirits/
https://www.minibottlelibrary.com/mbl/alpha/kru-spirits/
#28
MIKE is my name!
how about 8-13 bucks?
google
"seriously safe stainless water bottles"
or
https://www.healthylifewater.com/inde...products_id=84
they have a drinking valve so no need to remove the cap.
comes is candy colors also
I got a red,blue and clear one.(shame no green!)
they are great-I hope to buy a few more stateside
here is nelli with a blue one
"seriously safe stainless water bottles"
or
https://www.healthylifewater.com/inde...products_id=84
they have a drinking valve so no need to remove the cap.
comes is candy colors also
I got a red,blue and clear one.(shame no green!)
they are great-I hope to buy a few more stateside
here is nelli with a blue one
Last edited by puchfinnland; 10-10-12 at 03:39 AM.
#29
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,932
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Likes: 0
Liked 2,005 Times
in
1,061 Posts
Though I am anything but a fan of plastic, the water bottle thing is best suited to plastic, in my opinion. How many people have to warn about screwed up frame tubes or paint/art damage to get the message across. That said, I cannot wait to finish (actually start) the restoration on my 1939 CCM "Road Racer".
Stainless steel? Not a chance - too heavy! Alloy? Yup but I sure as the heck never intend to take a drink out of one of them. They are 100% aesthetic.
And that same aesthetic concern prompted the installation of this single water bottle mounted to my PX10. Yes, it is plastic and no, I do not intend to use it for drinking...
Stainless steel? Not a chance - too heavy! Alloy? Yup but I sure as the heck never intend to take a drink out of one of them. They are 100% aesthetic.
And that same aesthetic concern prompted the installation of this single water bottle mounted to my PX10. Yes, it is plastic and no, I do not intend to use it for drinking...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#30
Senior Member
I will never get around to making all the things I would like to make. I hope bottles make the "did" list.
Because of the amount of aluminum in my life I try to avoid using it to handle my food and I try keep it away from my mouth. but it's used for food service. Copper is toxic and needs to be tinned or be a special alloy (or something like that).
Because of the amount of aluminum in my life I try to avoid using it to handle my food and I try keep it away from my mouth. but it's used for food service. Copper is toxic and needs to be tinned or be a special alloy (or something like that).
Last edited by ftwelder; 10-10-12 at 04:32 AM.
#31
MIKE is my name!
Stainless steel? Not a chance - too heavy! Alloy? Yup but I sure as the heck never intend to take a drink out of one of them. They are 100% aesthetic.
- I just weighed my "seriously safe stainless water bottle"
160 g or 6.5 oz
wow that is heavy!?!?
I wont use plastic anymore and aluminum is a no no
- I just weighed my "seriously safe stainless water bottle"
160 g or 6.5 oz
wow that is heavy!?!?
I wont use plastic anymore and aluminum is a no no
#32
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 25,048
Bikes: Several, mostly not name brands.
Liked 3,682 Times
in
2,079 Posts
#34
Senior Member
As much as I like the look of stainless bottles, all mine now sit unused in the kitchen cabinet. I found I like to be able to squeeze the bottle when I'm hot and need a drink or to wet my brow. The SS bottles sweat a lot with ice.
#35
Senior Member
#36
In the right lane
What about the Klean Kanteen stainless top bottles. I'm saving my pennies for this Only need 3,925
https://www.kleankanteen.com/products...al/reflect.php
One thing I like about the stainless bottles is that when they fall out of the cage, they usually dent, but still hold water.
https://www.kleankanteen.com/products...al/reflect.php
One thing I like about the stainless bottles is that when they fall out of the cage, they usually dent, but still hold water.
#37
No one cares
yep, +1
__________________
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
#38
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,643
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Liked 62 Times
in
34 Posts
I don't like steel bottles. Heavy and rattle. Aluminum bottles rattle too, though I suppose a tight-fitting cage would solve that issue. I like plastic and have no issues drinking from it, same as I buy milk in plastic jugs, and it is important to be able to squeeze the bottle.
#39
In the right lane
I don't like steel bottles. Heavy and rattle. Aluminum bottles rattle too, though I suppose a tight-fitting cage would solve that issue. I like plastic and have no issues drinking from it, same as I buy milk in plastic jugs, and it is important to be able to squeeze the bottle.
I had a problem with steel bottles and not being able to squeeze. Secret is to lift the bottom of the bottle over your head and let gravity do the work. Also the bottle top needs to have a little air intake. That's why Klean Kanteen recommends not closing the lid too tight.
My only reason for going to steel though was the horrible taste of plastic bottles, especially when you hit the bottom... yuck.
As others point out though, steel bottles and vintage bikes seem to go together.
Last edited by gerv; 10-10-12 at 09:04 PM.
#41
Senior Member
$55 bucks! ouch!
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
#43
Senior Member
Just a follow up on this thread. I went ahead and purchased one of these bottles and it arrived yesterday. First, yes, it was expensive compared to a plastic bottle but I was looking for something that would compliment some of my nicer Japanese bikes. Wow, it's gorgeous and well crafted! The service and communication from Japan were excellent. Here's link with more photos that the seller sent me, I don't think they were on the original auction:
https://randonneur.jp/bottle/
Scott
https://randonneur.jp/bottle/
Scott
#44
Senior Member
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 624
Bikes: 1949 'Italian' , 1950 San Giusto, 1897 Union, and a number of "projects"... 198? Grandis, a couple of Mixte's...
Likes: 0
Liked 1 Time
in
1 Post
Bottiglie d'acqua !
Bottiglie d'acqua and portabottiglie !!!
Ok, actually not finished with these, as I plane to get the drink tubes and waxed twine ties installed next, but I think they are turning out ok. The large stainless bottles (1 qt @) were an ebay buy for a few bucks, the smaller ones are cheap aluminum water bottles. Cork has replaced the previous tops.
The decals are also from an ebay seller - couple of dollars for all. They represent Treviso and Torino.
The holder is really vintage, and I love the tension adjusters on each side ! The tension tabs are in fact marked with Brevettato something..faintly. The holder will serve as a model for a repro I will braze up with old spokes to fit the larger bottles...
Ok, actually not finished with these, as I plane to get the drink tubes and waxed twine ties installed next, but I think they are turning out ok. The large stainless bottles (1 qt @) were an ebay buy for a few bucks, the smaller ones are cheap aluminum water bottles. Cork has replaced the previous tops.
The decals are also from an ebay seller - couple of dollars for all. They represent Treviso and Torino.
The holder is really vintage, and I love the tension adjusters on each side ! The tension tabs are in fact marked with Brevettato something..faintly. The holder will serve as a model for a repro I will braze up with old spokes to fit the larger bottles...
#45
Photographer
Scott
__________________
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
ClassicFuji.posthaven.com.archive
IG @scottryder.surf.cycle
IG @scottryder.fine.art
#46
Junior Member
Join Date: Aug 2009
Posts: 24
Likes: 0
Liked 0 Times
in
0 Posts
Just wanted to pass this along for those looking for a vintage bottle. These are new but have that vintage look.
https://www.ebay.com/itm/authentic-wa...item20ccf911f7
https://www.ebay.com/itm/authentic-wa...item20ccf911f7
#48
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Likes: 0
Liked 34 Times
in
28 Posts
They look like very nice period correct detail to add to an older bike, but I dunno about spending hundreds of dollars for old handlebar mounted waterbottles and cages is just hard for me to understand...... and most of the time the old ones sold out there look so beat up, rusty (cages) and dinghy. These old aluminum bottles most likely did not have any protective coatings inside to keep you from drinking in the corrosion that might have formed in there through the years...... Unless you can really clean the insides and caps really good and maybe add a food-safe internal coating. Do you guys really want to drink from those things?
I just can never convince myself to ever buy and use used waterbottles of any kind, plastic or metal, I guess,.......Uhmmm....decades old drool DNA from a stranger....Yummy!
Chombi
I just can never convince myself to ever buy and use used waterbottles of any kind, plastic or metal, I guess,.......Uhmmm....decades old drool DNA from a stranger....Yummy!
Chombi
#49
Senior Member
Thread Starter
They look like very nice period correct detail to add to an older bike, but I dunno about spending hundreds of dollars for old handlebar mounted waterbottles and cages is just hard for me to understand...... and most of the time the old ones sold out there look so beat up, rusty (cages) and dinghy. These old aluminum bottles most likely did not have any protective coatings inside to keep you from drinking in the corrosion that might have formed in there through the years...... Unless you can really clean the insides and caps really good and maybe add a food-safe internal coating. Do you guys really want to drink from those things?
I just can never convince myself to ever buy and use used waterbottles of any kind, plastic or metal, I guess,.......Uhmmm....decades old drool DNA from a stranger....Yummy!
Chombi
I just can never convince myself to ever buy and use used waterbottles of any kind, plastic or metal, I guess,.......Uhmmm....decades old drool DNA from a stranger....Yummy!
Chombi
#50
Senior Member