Show us your C&V Gravel Grinders
#451
Senior Member
Join Date: Aug 2011
Location: RTP Area, NC
Posts: 338
Bikes: Somebody stole them all... I walk now.
Likes: 0
Liked 1 Time
in
1 Post
Finished up my other winter project. I should have taken some pictures, but the wheels have some custom CNC (CNC'd?) hubs from 1984. I bought the bike from the original owner that worked in an LBS that sold a few of the hubs back in the day.
oh, the bike is a Univega Gran Turismo.
oh, the bike is a Univega Gran Turismo.
#452
Junior Member
Join Date: Aug 2010
Posts: 11
Bikes: ridley, peugeot, airborne 29r, quest mtb with amp F1 fork
Likes: 0
Liked 0 Times
in
0 Posts
Cool, glad to hear it! I plan on keeping a record of other bike related tinkering up there. Currently working on my 'real' road bike now. Its been ridden hard and put up wet for far too long.
#453
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,190
Bikes: Yes
Likes: 0
Liked 17 Times
in
16 Posts
Finally finished with the Poprad. I picked up this frame NOS a couple months ago. I swiped a few parts off the Gitane TDF that I'd been intending to slowly recreate/rebuild over the summer, that one will return to more original equipment most likely. I believe the Poprad frame is an '02, with a one inch fork instead of the published one and an eighth, so maybe an oddity. It's the Reynolds 853 "designer mix" of 853 main tubes and 6xx Reynolds tubes for the stays. It has the same net positioning for me as my Trek 760, so I'm hoping I can chew through gravel like I'm on a slightly slower road bike.
I wanted hill gearing for the upcoming Almonzo and happened upon a 13-30 cassette to mate with the 48/34 crank. Actually the net gearing is pretty close to my 12-28 46/30 on the trek in terms of steps and range, so another reason I hope it's a natural fit. The Poprad is running a standard cyclocross shimergo 8 speed setup, driving Ultegra derailleurs. I opted to avoid the Poprad brake chatter issues, so used a lower fork mount cable hanger (also helps get the wheel off the front with a lower straddle cable). The wheels are nothing special, and some Ksyrium Equipe's will be used for events (the wheels currently on it are spring pothole friendly). The cables need a final trim after a bit of shakedown and successful first outing. Anyhow, thought I'd share the results before I get it all messed up.
#454
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,956
Bikes: I used to have many. And I Will again.
Likes: 0
Liked 11 Times
in
10 Posts
Looks great! I especially like the bar tape choice, what brand is it?
Interesting saddle position, very time trial/tri bike forward bias. Is this to place more weight on the front tire? I noticed recently while playing in the dirt with my drop bar conversion, that being more forward on top of the levers resulted in better traction and handling. A lot more confidence inspiring when at speed.
What size tires are those?
Very envious of you, Jeff, and Grady and the rest of the forumites who will be at this year's Almonzo. Wish I could join you guys. Sounds like a heck of an event.
Interesting saddle position, very time trial/tri bike forward bias. Is this to place more weight on the front tire? I noticed recently while playing in the dirt with my drop bar conversion, that being more forward on top of the levers resulted in better traction and handling. A lot more confidence inspiring when at speed.
What size tires are those?
Very envious of you, Jeff, and Grady and the rest of the forumites who will be at this year's Almonzo. Wish I could join you guys. Sounds like a heck of an event.
#455
Senior Member
Finally finished with the Poprad. I picked up this frame NOS a couple months ago. I swiped a few parts off the Gitane TDF that I'd been intending to slowly recreate/rebuild over the summer, that one will return to more original equipment most likely. I believe the Poprad frame is an '02, with a one inch fork instead of the published one and an eighth, so maybe an oddity. It's the Reynolds 853 "designer mix" of 853 main tubes and 6xx Reynolds tubes for the stays. It has the same net positioning for me as my Trek 760, so I'm hoping I can chew through gravel like I'm on a slightly slower road bike.
I wanted hill gearing for the upcoming Almonzo and happened upon a 13-30 cassette to mate with the 48/34 crank. Actually the net gearing is pretty close to my 12-28 46/30 on the trek in terms of steps and range, so another reason I hope it's a natural fit. The Poprad is running a standard cyclocross shimergo 8 speed setup, driving Ultegra derailleurs. I opted to avoid the Poprad brake chatter issues, so used a lower fork mount cable hanger (also helps get the wheel off the front with a lower straddle cable). The wheels are nothing special, and some Ksyrium Equipe's will be used for events (the wheels currently on it are spring pothole friendly). The cables need a final trim after a bit of shakedown and successful first outing. Anyhow, thought I'd share the results before I get it all messed up.
Smart gearing. You'll be able to track with the big kids I think.
You are also wise to use the lower fork hanger. It should take most of the chatter out.
That's the right build for all Minnesota roads this spring, not just gravel.
Man, the roads here stink.
Fwiw I tossed some SKS Longboards on my Fargo for our ride this morning. What a difference in comfort.
#457
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,190
Bikes: Yes
Likes: 0
Liked 17 Times
in
16 Posts
Looks great! I especially like the bar tape choice, what brand is it?
Interesting saddle position, very time trial/tri bike forward bias. Is this to place more weight on the front tire? I noticed recently while playing in the dirt with my drop bar conversion, that being more forward on top of the levers resulted in better traction and handling. A lot more confidence inspiring when at speed.
What size tires are those?
Very envious of you, Jeff, and Grady and the rest of the forumites who will be at this year's Almonzo. Wish I could join you guys. Sounds like a heck of an event.
Interesting saddle position, very time trial/tri bike forward bias. Is this to place more weight on the front tire? I noticed recently while playing in the dirt with my drop bar conversion, that being more forward on top of the levers resulted in better traction and handling. A lot more confidence inspiring when at speed.
What size tires are those?
Very envious of you, Jeff, and Grady and the rest of the forumites who will be at this year's Almonzo. Wish I could join you guys. Sounds like a heck of an event.
The tires are 40's, and they are the 120tpi clements. I wanted to try the skinwall Bruce Gordon tires, but didn't have the clearance for them.
As for weight bias, the seat position mimics the 760 which I ride all the time. Over time my riding position has really crept forward, and I use a lot more hamstring in my non-climbing cadence than I did for years. Just getting old, and have to use more muscles to get the job done I suppose.
I'm also used to being front weighted in the soft stuff, as my croll is a drop MTB setup that I tend to ride on the hoods. So I hope my experience is like yours, and it works out for better traction on some of those downhill turns in the river bottoms around here. The Almonzo will be my first gravel event, and I'm not intending to do anything but finish. Secondary goal is to not walk up any of the hills.
#458
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,190
Bikes: Yes
Likes: 0
Liked 17 Times
in
16 Posts
Looks fantistic.
Smart gearing. You'll be able to track with the big kids I think.
You are also wise to use the lower fork hanger. It should take most of the chatter out.
That's the right build for all Minnesota roads this spring, not just gravel.
Man, the roads here stink.
Fwiw I tossed some SKS Longboards on my Fargo for our ride this morning. What a difference in comfort.
Smart gearing. You'll be able to track with the big kids I think.
You are also wise to use the lower fork hanger. It should take most of the chatter out.
That's the right build for all Minnesota roads this spring, not just gravel.
Man, the roads here stink.
Fwiw I tossed some SKS Longboards on my Fargo for our ride this morning. What a difference in comfort.
#459
Senior Member
I agree on the Tektro set up. They made go for absolutely hating canti's to loving them now.They are so much easier to set up and adjust.
__________________
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
#460
Senior Member
Grady, I think you are right about fenders and long ride comfort. I just need to teach myself the hard way, I suppose. Thanks for the compliment. This is the last skiing weekend for me barring a late March snowstorm (trails getting too rutted and icy, but the roads are no picnic either and I agree they are pretty bad this year).
If it's warm enough I am doing the pond skip on the 22nd.
I'll be riding everyday though.
Btw My money's on you doing the entire ride at Almanzo. Oriole Hill is tough though, so do some reps before the event.
If you want to pace with some speedsters, I'll be happy to introduce you. Nice guys, but I won't be quick enough to hang with them.
I'll be walking up half the hills unless I push my mileage way up and do something about gearing.
#461
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,766
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Liked 1,791 Times
in
988 Posts
Thanks. The bar tape is some stuff from Bontrager. The saddle is such a dark brown, that I could not find a solid color tape that matched, and didn't want to use cloth tape with shellac for such rough roads (but would have done so if I'd not found this tape). It's sort of a two tone brown, and worked out well.
I like to buy a bunch at the Wheel And Sprocket Bike Expo- they usually have it on sale. I prefer the Brown and the White.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#464
Hey Chrome Molly,
Very nice build, your Poprad is perfect! I miss my Poprad, that Reynolds frame had such a nice ride for a CX bike, I'm getting all nostalgic looking at yours. I've often thought about picking up another frame and building it up with a ShimErgo set up. I'm really curious to hear your trail report, please share any highs or lows, thanks!
Thanks for sharing!
-D-
Very nice build, your Poprad is perfect! I miss my Poprad, that Reynolds frame had such a nice ride for a CX bike, I'm getting all nostalgic looking at yours. I've often thought about picking up another frame and building it up with a ShimErgo set up. I'm really curious to hear your trail report, please share any highs or lows, thanks!
Thanks for sharing!
-D-
#466
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
It's not quite C&V...but it's steel and C&V inspired. Currently has 29mm tires and fenders. Will handle the gravel nicely.
This bike > all my other bikes, current and past.
I have a few alloy Campy 10s groups I could hang on it, but the Sram stuff works so well it's hard to justify removing it...
I also have this bike's big brother...but the only gravel this one will see is if there is a gravel section of the CX race course.
When the conditions are really sloppy, I ride this beast. I "raced" it in northern VT a few weeks ago for Rasputitsa. Only thing C&V about this one is the saddle...
This bike > all my other bikes, current and past.
I have a few alloy Campy 10s groups I could hang on it, but the Sram stuff works so well it's hard to justify removing it...
I also have this bike's big brother...but the only gravel this one will see is if there is a gravel section of the CX race course.
When the conditions are really sloppy, I ride this beast. I "raced" it in northern VT a few weeks ago for Rasputitsa. Only thing C&V about this one is the saddle...
Last edited by 4Rings6Stars; 05-07-14 at 12:07 AM.
#467
Member
Velocivixen, they are SR Randonneur handlebars. Yes, they are shallow and narrow. The drop also flairs out a bit....kind of similar to Soma woodchipper bars, but not nearly as aggressive of a flair. Lovely bars, really.
#470
Full Member
That looks great! Did you have it stripped and plated or did it come that way?
#472
Champion of the Low End
#474
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,466
Bikes: More than I care to admit
Liked 1,050 Times
in
509 Posts
This thing ground some gravel yesterday and quite a bit last September on the Cino.
Pasela 35's fit, but just barely.
Always looking for an excuse to post and/or view bike porn.
Pasela 35's fit, but just barely.
Always looking for an excuse to post and/or view bike porn.
#475
Senior Member
Recently tried 650b Hetres on my neo-retro '05 Mercian Vincitore, and hit a nearby rail trail a week or two back. It was built for 700c wheels, but feels both a little faster and floatier with 650b.
BEFORE, w/700x35mm Compass Stampede Pass tires:
AFTER, w/650bx42mm Hetres:
BEFORE, w/700x35mm Compass Stampede Pass tires:
AFTER, w/650bx42mm Hetres:
__________________
Fuggedaboutit!
Fuggedaboutit!