Trekking Handlebars: Pro or Con?
#1
Trekking Handlebars: Pro or Con?
I am considering putting trekking handlebars on my Specialized Crosstrail Sport Disc. The single grip available on flat bars isn't enough.
I've considered bar ends but I am thinking that trekking bars would offer more hand positions and more sitting positions ( upright and more upright ).
A roadie friend thinks that trekking handlebars should be restricted to clowns in a circus.
I wanted to solicit opinions from others more experienced than myself.
I've considered bar ends but I am thinking that trekking bars would offer more hand positions and more sitting positions ( upright and more upright ).
A roadie friend thinks that trekking handlebars should be restricted to clowns in a circus.
I wanted to solicit opinions from others more experienced than myself.
#2
The Improbable Bulk
Join Date: Jul 2005
Location: Wilkes-Barre, PA
Posts: 8,379
Bikes: Many
Likes: 0
Liked 7 Times
in
7 Posts
I bought a trekking bar a few years ago, for the same reason, but I have never tried it. I think I may throw it on my back-up hybrid just to give it a try. I even have angle adjustable stems in 2 lengths, so I can obviously fiddle with positioning to get it right.
As far as what people think... unless they are the people you are building the bike for, don't sweat it. DO what makes riding your bike pleasant for you.
As far as what people think... unless they are the people you are building the bike for, don't sweat it. DO what makes riding your bike pleasant for you.
__________________
Slow Ride Cyclists of NEPA
People do not seem to realize that their opinion of the world is also a confession of character.
- Ralph Waldo Emerson
Slow Ride Cyclists of NEPA
People do not seem to realize that their opinion of the world is also a confession of character.
- Ralph Waldo Emerson
#4
Banned
+1, ditch the critic , they're stuck in their own cult group think ..
2 bikes with trekking bars .. R'off gripshifters
1 bike with Ergon integrated Bar-end comfortable grips .. ( my road bike rarely on the road any more )
2 bikes with trekking bars .. R'off gripshifters
1 bike with Ergon integrated Bar-end comfortable grips .. ( my road bike rarely on the road any more )
#6
Senior Member
Join Date: Apr 2014
Location: NW Arkansas
Posts: 57
Likes: 0
Liked 0 Times
in
0 Posts
I just started a thread reporting on mine. Here: https://www.bikeforums.net/hybrid-bic...ai-ohh-my.html
Love them. I have my stem up high and can still get into a semi-aero position on the front part of them. Very comfortable bars and recently saved my hands in a crash.
Love them. I have my stem up high and can still get into a semi-aero position on the front part of them. Very comfortable bars and recently saved my hands in a crash.
#7
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Likes: 0
Liked 2 Times
in
2 Posts
Ask your roadie friend how many snowstorms his road bike has been through.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#9
I just started a thread reporting on mine. Here: https://www.bikeforums.net/hybrid-bic...ai-ohh-my.html
Love them. I have my stem up high and can still get into a semi-aero position on the front part of them. Very comfortable bars and recently saved my hands in a crash.
Love them. I have my stem up high and can still get into a semi-aero position on the front part of them. Very comfortable bars and recently saved my hands in a crash.
#12
Senior Member
Join Date: Apr 2014
Location: NW Arkansas
Posts: 57
Likes: 0
Liked 0 Times
in
0 Posts
As I'm cruising along I place my hands fully open with fingers extended and flat with the heel of my palms on the back outside curve and fingers on the front. That's a position you can't get with any other bar and is very comfortable for me.
Last edited by Steve Urquell; 08-23-14 at 04:27 AM.
#13
Banned.
Join Date: Jan 2014
Location: Vegemite Island
Posts: 4,128
Bikes: 2017 Surly Troll with XT Drive Train, 2017 Merida Big Nine XT Edition, 2016 Giant Toughroad SLR 2, 1995 Trek 830
Liked 312 Times
in
220 Posts
Thanks. It's a Nashbar bar and actually has a slight rise to it(~1"). I was on the fence about adding ergo grips but decided to just try the foam knowing I could always cut it off. Turns out the foam is really comfortable. It's a bit longer than standard drop bar foam and I waited awhile to receive it as it was literally shipped on a slow boat from China. Amazon.com : NuoYa001 A Pair Brand New Bicycle Cycle Bike Foam Rubber Handle Bar Grips 50CM Dia2CM : Bike Car Rack Accessories : Sports & Outdoors
Here's mine with twist grips.
As I'm cruising along I place my hands fully open with fingers extended and flat with the heel of my palms on the back outside curve and fingers on the front. That's a position you can't get with any other bar and is very comfortable for me.
Here's mine with twist grips.
As I'm cruising along I place my hands fully open with fingers extended and flat with the heel of my palms on the back outside curve and fingers on the front. That's a position you can't get with any other bar and is very comfortable for me.
#14
Senior Member
Join Date: Apr 2014
Location: NW Arkansas
Posts: 57
Likes: 0
Liked 0 Times
in
0 Posts
#15
Junior Member
I love my trekking bars. Added them earlier this summer and am getting them dialed in. The number of ways you can set up trekking bars is impressive. I will post some pictures of my setup later.
#17
Senior Member
Here's mine and I love them. I grew up on road bikes with drop bars, didn't like the switch to flat bars at all. These are great - even better than drops for multiple hand positions.
Unlike many people that mount the controls as far inward as possible, right at the inside edge, you'll see that I've mounted them a few inches from the bar ends. That will give you much better control (with your hands further apart) when you need it the most - under hard braking. Mounting them so far to the inside makes the steering twitchy and unstable with your hands so close together. Put them as far out as you can and still achieve a full-hand grip on the bars and you'll be almost as wide as on normal flat bars.
You may have to use a longer stem, or maybe not. Mine look like they're angled up a lot, but that's where I get the most natural hand positions. Lots of ways to dial these in.
Unlike many people that mount the controls as far inward as possible, right at the inside edge, you'll see that I've mounted them a few inches from the bar ends. That will give you much better control (with your hands further apart) when you need it the most - under hard braking. Mounting them so far to the inside makes the steering twitchy and unstable with your hands so close together. Put them as far out as you can and still achieve a full-hand grip on the bars and you'll be almost as wide as on normal flat bars.
You may have to use a longer stem, or maybe not. Mine look like they're angled up a lot, but that's where I get the most natural hand positions. Lots of ways to dial these in.
Last edited by Jeff Neese; 08-23-14 at 09:45 AM.
#19
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,951
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
I've been riding road bikes for a long time and I'm a huge fan of drop bars. I have mixed feelings about many of the various flat bars I've tried over the eyars. But not trekking bars. They're terrific. I have a set on a vintage mtb and no doubt I'll start using them on other bikes:
#20
Senior Member
Join Date: Aug 2014
Location: Indiana
Posts: 478
Bikes: 2015 Trek 7.3
Likes: 0
Liked 0 Times
in
0 Posts
What makes them terrific? Is it being able to change hand positions on long rides or is there a particular hand position that you can only get with these bars?
#21
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,951
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
The conversion from a flat bar is easy as all the parts move over. Trekking bars give you lots of hand positions just like drop bars so they're very comfortable for longer rides. They work really well when the bike is a bit small since you don't have to drop down as far to reach the various positions. They just plain work.
#22
Junior Member
As mentioned, it is an easy and a cheap switch from flat bars to trekking. Depending on setup, you can event get fairly "aero" positions, as well.
#23
Have bike, will travel
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284
Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2
Liked 294 Times
in
161 Posts
I installed Shimano trigger shifters with integral brake levers on the open section behind the stem. The installation is identical to the example in post 17. Very easy to operate the shifters and brakes.
__________________
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.
#25
Senior Member
I was going to say they are for clowns in a circus... but your friend beat me too it.
My beef with the trekking bars is that it takes away the native bar position and adds one forward and one rearward. What happened to the neutral position???
As for the forward position, bar ends will give you that. You will not get the more upright position which is why I think trekking bikes are more for the comfort hybrid crowd.
My beef with the trekking bars is that it takes away the native bar position and adds one forward and one rearward. What happened to the neutral position???
As for the forward position, bar ends will give you that. You will not get the more upright position which is why I think trekking bikes are more for the comfort hybrid crowd.