ISO and For Trade thread parts 2 and 3.
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 910
Bikes: A few modern, Several vintage, All ridden when weather allows.
Liked 202 Times
in
140 Posts
Hi,
I need a 48 tooth (or 46T) 130 BCD Alloy chain ring to finish up a single speed project. Doesn’t need to be high quality, functionality is more important. Have to trade: a very nice 26.6 SR Laprade fluted seatpost or a Shimano Tourney front / Alivio rear derailleur set in good condition. PM or e-mail if interested or need pix.
Regards,
Van
I need a 48 tooth (or 46T) 130 BCD Alloy chain ring to finish up a single speed project. Doesn’t need to be high quality, functionality is more important. Have to trade: a very nice 26.6 SR Laprade fluted seatpost or a Shimano Tourney front / Alivio rear derailleur set in good condition. PM or e-mail if interested or need pix.
Regards,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Death fork? Naaaah!!
ISO TA 120/121mm bottom bracket spindle to triplize a double.
Top
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
Wanted: Frames/forks that actually fit me mostly.
20-22"-ish mountain frame and fork. Non-suspension corrected rigid and fender/rack mounts.
57cm X 57cm-ish cross/touring frame & fork. Canti mounts preferably.
56 or maybe 58cm 26" Surly long haul trucker.
Suspension stem, softride, flexstem or maybe a JP Morgan. 1 1/8" threaded or threadless.
Sun Rhyno lite XL 26", 32h rim, black with silver machined sidewalls.
170mm 8/9spd mountain triple cranks, 94BCD if possible.
For trade: Tools, lots of tools, and some parts.
Tools:
Rohloff chain tool
VAR headset press
Kingsbridge BB tool
Shimano Dura-ace 1/8" track chainwhip/lockring wrench
Shimano headset/BB wrench set with pouch
J.A. Stein Stronglight and TA crank extractors
1 1/4" OS mountain bike/tandem headset tools, wrenches, crown race setter, rocket tools.
Eldi fender punch
TA BB tools, old and new style
Campagnolo tools, reverse thread crank extractor, dust cap puller etc.
Almost every freewheel, BB and cassette tool you can imagine.
Lots more...just ask.
Parts:
Shimano 10spd XT 11-36t cassette
White industries single speed FW 16t and 18t trials model
AVID BB7 mountain disc brakes with 160mm rotors and AVID SD-Ti levers
Huret derailleurs front and rear
Shimano 6500 crank arms 172.5
Cannondale/Coda super compact 44/29t double 170mm, octalink with 6500 BB
Fizik pave saddle white/black
and all sorts of other stuff...
Also lots of odd small parts, dust caps, bolts and misc.
20-22"-ish mountain frame and fork. Non-suspension corrected rigid and fender/rack mounts.
57cm X 57cm-ish cross/touring frame & fork. Canti mounts preferably.
56 or maybe 58cm 26" Surly long haul trucker.
Suspension stem, softride, flexstem or maybe a JP Morgan. 1 1/8" threaded or threadless.
Sun Rhyno lite XL 26", 32h rim, black with silver machined sidewalls.
170mm 8/9spd mountain triple cranks, 94BCD if possible.
For trade: Tools, lots of tools, and some parts.
Tools:
Rohloff chain tool
VAR headset press
Kingsbridge BB tool
Shimano Dura-ace 1/8" track chainwhip/lockring wrench
Shimano headset/BB wrench set with pouch
J.A. Stein Stronglight and TA crank extractors
1 1/4" OS mountain bike/tandem headset tools, wrenches, crown race setter, rocket tools.
Eldi fender punch
TA BB tools, old and new style
Campagnolo tools, reverse thread crank extractor, dust cap puller etc.
Almost every freewheel, BB and cassette tool you can imagine.
Lots more...just ask.
Parts:
Shimano 10spd XT 11-36t cassette
White industries single speed FW 16t and 18t trials model
AVID BB7 mountain disc brakes with 160mm rotors and AVID SD-Ti levers
Huret derailleurs front and rear
Shimano 6500 crank arms 172.5
Cannondale/Coda super compact 44/29t double 170mm, octalink with 6500 BB
Fizik pave saddle white/black
and all sorts of other stuff...
Also lots of odd small parts, dust caps, bolts and misc.
Last edited by wesmamyke; 02-23-16 at 05:29 PM.
Senior Member
Senior Member
Join Date: Dec 2014
Location: MidWest USA
Posts: 82
Bikes: Colnago Super, Giant, Waterford X11, Look 785 Huez, Merlin Titanium, in past times...Gitane Super Corsa, Ron Stout, Ciocc San Cristabal, Ciocc CX, Colnago Master, Pogliaghi TT, Crescent
Likes: 0
Liked 9 Times
in
4 Posts
Zeus 2000 freewheel, 13-20 in good shape, with extractor will swap for early 1990's Selle Italia Flite saddle that also is in good shape.
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 910
Bikes: A few modern, Several vintage, All ridden when weather allows.
Liked 202 Times
in
140 Posts
Hi folks,
Wanted: Large flange Campagnolo front hub with quick release in good condition. Prefer Record, but will consider others.
Have to trade: Cinelli bars (44cm Campione del Monde, 66-44) and Stem (12cm XA). Both are in very good condition – the bars have a few small scrapes in the anodizing from mounting accessories, but no scratches or dings. The stem has a “rub ring” at the insertion point.
Also need: 46 or 48 tooth 130 BCD alloy chainring. Decent quality, but functionality is more important than fancy name or appearance.
For trade: Very nice 26.6 SR Laprade fluted seat post or Shimano Derailleur set; Tourney front, Alivo rear plus an unbranded 60s 39cm English dropped bars Maes) added to either if you would like them.
PM or e-mail for pix or additional info.
Thanks and regards,
Van
Wanted: Large flange Campagnolo front hub with quick release in good condition. Prefer Record, but will consider others.
Have to trade: Cinelli bars (44cm Campione del Monde, 66-44) and Stem (12cm XA). Both are in very good condition – the bars have a few small scrapes in the anodizing from mounting accessories, but no scratches or dings. The stem has a “rub ring” at the insertion point.
Also need: 46 or 48 tooth 130 BCD alloy chainring. Decent quality, but functionality is more important than fancy name or appearance.
For trade: Very nice 26.6 SR Laprade fluted seat post or Shimano Derailleur set; Tourney front, Alivo rear plus an unbranded 60s 39cm English dropped bars Maes) added to either if you would like them.
PM or e-mail for pix or additional info.
Thanks and regards,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Senior Member
EDIT: Got it!!
ISO: Black Brooks Pro or B17 in very good condition.
For trade I have: Mavic Starfish crankset 170 with 53, 41 rings, no caps, in very good condition.
ISO: Black Brooks Pro or B17 in very good condition.
For trade I have: Mavic Starfish crankset 170 with 53, 41 rings, no caps, in very good condition.
__________________
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
Last edited by Steve Whitlatch; 02-23-16 at 10:27 PM.
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,882
Bikes: Numerous
Liked 3,461 Times
in
987 Posts
Hi folks,
Wanted: Large flange Campagnolo front hub with quick release in good condition. Prefer Record, but will consider others.
Have to trade: Cinelli bars (44cm Campione del Monde, 66-44) and Stem (12cm XA). Both are in very good condition – the bars have a few small scrapes in the anodizing from mounting accessories, but no scratches or dings. The stem has a “rub ring” at the insertion point.
Thanks and regards,
Van
Wanted: Large flange Campagnolo front hub with quick release in good condition. Prefer Record, but will consider others.
Have to trade: Cinelli bars (44cm Campione del Monde, 66-44) and Stem (12cm XA). Both are in very good condition – the bars have a few small scrapes in the anodizing from mounting accessories, but no scratches or dings. The stem has a “rub ring” at the insertion point.
Thanks and regards,
Van
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,811
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 578 Times
in
343 Posts
I have a pretty good black Brooks Pro I'd be happy to trade away, but the Starfish doesn't tempt me. What else do you have?
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
Stop reading my posts!
[B]Wanted:
57cm X 57cm-ish cross/touring frame & fork. Canti mounts preferably.
Suspension stem, softride, flexstem or maybe a JP Morgan. 1 1/8" threaded or threadless.
For trade: Tools, lots of tools, and some parts.
tools:
VAR headset press
Kingsbridge BB tool
Shimano Dura-ace 1/8" track chainwhip/lockring wrench
J.A. Stein Stronglight and TA crank extractors
1 1/4" OS mountain bike/tandem headset tools, wrenches, crown race setter, rocket tools.
Eldi fender punch
TA BB tools, old and new style
Campagnolo tools, reverse thread crank extractor, dust cap puller etc.
Almost every freewheel, BB and cassette tool you can imagine.
Lots more...just ask.
Parts:
Shimano 10spd XT 11-36t cassette
White industries single speed FW 16t and 18t trials model
AVID BB7 mountain disc brakes with 160mm rotors and AVID SD-Ti levers
Huret derailleurs front and rear
Shimano 6500 crank arms 172.5
Cannondale/Coda super compact 44/30t double 170mm, octalink with 6500 BB
Fizik pave saddle white/black
and all sorts of other stuff...
Also lots of odd small parts, dust caps, bolts and misc.
57cm X 57cm-ish cross/touring frame & fork. Canti mounts preferably.
Suspension stem, softride, flexstem or maybe a JP Morgan. 1 1/8" threaded or threadless.
For trade: Tools, lots of tools, and some parts.
tools:
VAR headset press
Kingsbridge BB tool
Shimano Dura-ace 1/8" track chainwhip/lockring wrench
J.A. Stein Stronglight and TA crank extractors
1 1/4" OS mountain bike/tandem headset tools, wrenches, crown race setter, rocket tools.
Eldi fender punch
TA BB tools, old and new style
Campagnolo tools, reverse thread crank extractor, dust cap puller etc.
Almost every freewheel, BB and cassette tool you can imagine.
Lots more...just ask.
Parts:
Shimano 10spd XT 11-36t cassette
White industries single speed FW 16t and 18t trials model
AVID BB7 mountain disc brakes with 160mm rotors and AVID SD-Ti levers
Huret derailleurs front and rear
Shimano 6500 crank arms 172.5
Cannondale/Coda super compact 44/30t double 170mm, octalink with 6500 BB
Fizik pave saddle white/black
and all sorts of other stuff...
Also lots of odd small parts, dust caps, bolts and misc.
Banned.
Senior Member
ISO: Cinelli Quil Stem 100 to 110 with a 26.0 clamp
For trade I have:
Nitto Stem 110 with a 25.4 clamp VGC
Shimano SLR brakeset. Areo levers, black hoods in VGC, recessed mount short reach calipers.
Shimano Crankset 52 42 rings in VGC
Seat posts 27.2
I have at least 20 water bottle cages
Suntour shift levers and derailleurs
I can put together a nice box.
I also have green paper with pictures of dead presidents on them.
For trade I have:
Nitto Stem 110 with a 25.4 clamp VGC
Shimano SLR brakeset. Areo levers, black hoods in VGC, recessed mount short reach calipers.
Shimano Crankset 52 42 rings in VGC
Seat posts 27.2
I have at least 20 water bottle cages
Suntour shift levers and derailleurs
I can put together a nice box.
I also have green paper with pictures of dead presidents on them.
__________________
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
Senior Member
Banned.
Senior Member
Ah ok, I thought you meant new stuff. Those older 26.0 Ritchey bars are ergo bend, no bueno.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Banned.
Soma Highway One is a compact in 26.0 in silver. 75 reach, 130 drop.
I'm still looking for that Ritchey, as my buddy put one on his Tommaso.
It was modern, short/shallow, silver 26.0
Here's the Highway One, comes in 26.0 or 31.8, 38cm wide to 46cm wide.
or these, which I'm getting so I can use my Garmin on an out-front SRAM mount.
Last edited by RobbieTunes; 02-24-16 at 10:48 AM.
Senior Member
Senior Member
Keener splendor
https://www.ribblecycles.co.uk/deda-s...ndlebars-25-8/
Senior Member
You can also find the Deda bars with a classic bend for not much dough. I think they come in 42/44/46.
https://www.ribblecycles.co.uk/deda-s...ndlebars-25-8/
https://www.ribblecycles.co.uk/deda-s...ndlebars-25-8/
Senior Member
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
Nitto considers a "shallow" bar to be 140mm drop, the M-185. I think it's 82/140
Soma Highway One is a compact in 26.0 in silver. 75 reach, 130 drop.
I'm still looking for that Ritchey, as my buddy put one on his Tommaso.
It was modern, short/shallow, silver 26.0
Here's the Highway One, comes in 26.0 or 31.8, 38cm wide to 46cm wide.
Soma Highway One is a compact in 26.0 in silver. 75 reach, 130 drop.
I'm still looking for that Ritchey, as my buddy put one on his Tommaso.
It was modern, short/shallow, silver 26.0
Here's the Highway One, comes in 26.0 or 31.8, 38cm wide to 46cm wide.
__________________
My Bikes
My Bikes