Recumbent seat mesh got a hole during shipping
#1
Senior Member
Thread Starter
Join Date: Oct 2016
Posts: 107
Bikes: R4000si, 2013 CAADX
Likes: 0
Liked 0 Times
in
0 Posts
Recumbent seat mesh got a hole during shipping
I ordered a Rans tailwind recumbent bike off ebay and received this week. Noticed that the wheel axle damaged the backseat mesh about a quarter size. Is this something to worry about? Will it eventually damage the whole mesh back?
Last edited by kim43235; 03-11-17 at 04:24 PM.
#2
Senior Member
Join Date: Feb 2005
Location: Buckhorn, Ontario, Canada
Posts: 217
Bikes: Rans Screamer, Catrike Expedition, Specialized Montain Bike, Cannondale Quick SL1
Likes: 0
Liked 0 Times
in
0 Posts
I doubt it. I cut holes in our seat backs on our Rans Screamer 13 years ago to accommodate the water bottle cages. 8 holes in the fabric and they haven't stretched or spread over all the years. A call in to Rans to ask for a possible fix can't hurt. I have found the company to be very helpful. Mike
#3
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Liked 645 Times
in
366 Posts
If it was my seat I'd use my soldering gun to melt the plastic around the hole to keep it from unraveling further.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#4
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,218
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Liked 350 Times
in
228 Posts
Holes in the seatback mesh are pretty common on RANS standard seat back mesh. Older ones, anyway. We recently bit the bullet and replaced the seatback mesh on both our Screamer seats with new ones from RANS. The mesh seems much more rugged/durable. More like the mesh on the SlingMesh seats.
That said, it is quite possible to ride with holes in the seatback mesh. Usually not a problem.
Holes can be patched, with varying results, with adhesive tent repair patches, duct tape, adhesive/cloth, etc.
Holes made for water bottle cage attachment, easily made with a soldering iron, should be in the sturdy nylon fabric on the sides and are not a problem.
(My first recumbent was a 2000 Tailwind, purchased in 2006. Fun bike.)
That said, it is quite possible to ride with holes in the seatback mesh. Usually not a problem.
Holes can be patched, with varying results, with adhesive tent repair patches, duct tape, adhesive/cloth, etc.
Holes made for water bottle cage attachment, easily made with a soldering iron, should be in the sturdy nylon fabric on the sides and are not a problem.
(My first recumbent was a 2000 Tailwind, purchased in 2006. Fun bike.)
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Last edited by JanMM; 03-12-17 at 08:07 AM.
#5
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,218
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Liked 350 Times
in
228 Posts
You might want to search for previous threads on this topic at bentrideronline.com . https://www.google.com/search?q=RANS...utf-8&oe=utf-8. (Google works better than the BROL search tool.)
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
#6
Senior Member
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,493
Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed
Liked 755 Times
in
463 Posts
I've gone through two seat meshes on my V-Rex. The last time, I had my sister use the old one as a pattern and make a new one out of Pet-Pruf(tm) poly screen material, which I got from the local big-box hardware store. It has worked wonderfully and still looks like new 11 years later.
More immediately, I'd just melt the edges of the hole to keep it from fraying.
More immediately, I'd just melt the edges of the hole to keep it from fraying.