Suspension corrected fork
#1
Newbie
Thread Starter
Join Date: May 2016
Location: at home
Posts: 4
Likes: 0
Liked 0 Times
in
0 Posts
Suspension corrected fork
I want to replace the suspension fork on my bike with a steel rigid one. The bike is a 2014 Trek Verve 3 with a SR Suntour NEX, 50mm-travel fork, 1-1/8" thread-less headset. Any suggestions?
#2
aka Phil Jungels
First thing you have to do is get out the yardstick. Measure from the axle, to the top of the fork, right below the frame. That is the size you are looking for, or maybe 10-15mm less.
#3
Newbie
Thread Starter
Join Date: May 2016
Location: at home
Posts: 4
Likes: 0
Liked 0 Times
in
0 Posts
#4
aka Phil Jungels
This would be for a 650b, or 26" wheel. Next, you have to know the length of the steerer tube. Once you have those numbers, Phone Jensen or Niagara, and ask what is available. That phone all will save you a lot of internet serching.
#5
aka Phil Jungels
This is for a 26" tire. You will also need to measure the length of the steerer tube. I would then call Jensen or Niagara, to find out what is available. This phone call will save you a ton of internet searching,