Just me or do others not like bar end shifters ?
#51
Senior Member
Join Date: Jun 2006
Posts: 20,319
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3471 Post(s)
Liked 2,846 Times
in
2,007 Posts
Frame no doubt was modified at repaint for cable stops at head lug. Removal of shifter bosses.
Terrific paint on a subordinate level bike, someone must have really liked it
#52
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
Sure, the looks do take some getting used to. I would never put them on a bike that I intended to be a show pony. But for a bike that I intend to be a mule they are my first choice.
__________________
My Bikes
My Bikes
#53
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
After saying that I remembered that the bike that won best in show at this year's NAHBS had a Gevenalle shifter, so what do I know.
__________________
My Bikes
My Bikes
#54
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 348 Times
in
176 Posts
#55
Senior Member
Join Date: Sep 2017
Location: Center of Central CA
Posts: 1,582
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 897 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
That looks like something I could live with.
What I can't figure out is why no one has ever made a Grip Shift-type shifter that will fit on road bike drop bars. I love those on my MTB's. Simple, foolproof, reliable, cheap, and with no drawbacks other not being able to shift from the hoods or drops.
Same with thumb shifters. Why not make a thumb shifter that will fit on a road bike drop bar? I bought some very nice Sun Race 8 speed thumbshifters, but when they arrived, I discovered that they're designed to fit a smaller-diameter MTB flat bar ONLY. I broke the clamp trying to force it onto some road bike drop bars.
What I can't figure out is why no one has ever made a Grip Shift-type shifter that will fit on road bike drop bars. I love those on my MTB's. Simple, foolproof, reliable, cheap, and with no drawbacks other not being able to shift from the hoods or drops.
Same with thumb shifters. Why not make a thumb shifter that will fit on a road bike drop bar? I bought some very nice Sun Race 8 speed thumbshifters, but when they arrived, I discovered that they're designed to fit a smaller-diameter MTB flat bar ONLY. I broke the clamp trying to force it onto some road bike drop bars.
#56
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,703
Bikes: It's complicated.
Mentioned: 1307 Post(s)
Tagged: 0 Thread(s)
Quoted: 4719 Post(s)
Liked 5,989 Times
in
2,333 Posts
But at least one can call them extinct.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#57
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,648
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3874 Post(s)
Liked 2,579 Times
in
1,586 Posts
I haven't spent significant time on bar end shifters, but I have lots of friends who love them. They're great for shifting while in the drops, since you can just slide your hand backward a little to take care of things, and then move your hand back up to the hook.
If you are not comfortable riding in the drops, that is a completely different issue to be addressed!
If you are not comfortable riding in the drops, that is a completely different issue to be addressed!
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 12-02-17 at 05:48 PM.
#58
~>~
Posting that in the C&V sub-forum where bar-end shifters were the standard for touring and 'cross bikes for decades, not uncommon on road race bikes and "trick" on TT machines back-when do you expect a resounding: "Yes?"
BTW: If you rotate your bars so they are parallel, or nearly so, to the ground you will have the correct ergonomics for the controls of the period when bar-cons were common.
-Bandera
BTW: If you rotate your bars so they are parallel, or nearly so, to the ground you will have the correct ergonomics for the controls of the period when bar-cons were common.
-Bandera
Last edited by Bandera; 12-02-17 at 05:30 PM.
#59
Senior Member
#60
Seńor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,986
Bikes: Mostly English - predominantly Raleighs
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 1519 Post(s)
Liked 1,142 Times
in
667 Posts
That looks like something I could live with.
What I can't figure out is why no one has ever made a Grip Shift-type shifter that will fit on road bike drop bars. I love those on my MTB's. Simple, foolproof, reliable, cheap, and with no drawbacks other not being able to shift from the hoods or drops.
Same with thumb shifters. Why not make a thumb shifter that will fit on a road bike drop bar? I bought some very nice Sun Race 8 speed thumbshifters, but when they arrived, I discovered that they're designed to fit a smaller-diameter MTB flat bar ONLY. I broke the clamp trying to force it onto some road bike drop bars.
What I can't figure out is why no one has ever made a Grip Shift-type shifter that will fit on road bike drop bars. I love those on my MTB's. Simple, foolproof, reliable, cheap, and with no drawbacks other not being able to shift from the hoods or drops.
Same with thumb shifters. Why not make a thumb shifter that will fit on a road bike drop bar? I bought some very nice Sun Race 8 speed thumbshifters, but when they arrived, I discovered that they're designed to fit a smaller-diameter MTB flat bar ONLY. I broke the clamp trying to force it onto some road bike drop bars.
note - I realize that Genevale's are essentially thumbies integrated to brake levers. I have no expectations that a MTB will look refined, so not an issue there. There's just something about mounting a box-like apparatus on an elegantly curved brake lever that doesn't mesh. There are some brifters that are ugly beyond redemption, and others that have flowing, sculpted lines. Perhaps someone with design sensibilities will come up with a more aesthetic presentation and I might get past my initial impression.
__________________
In search of what to search for.
In search of what to search for.
#62
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
Bar end shifters, stem shifters, and downtube shifters are extinct. It's mind boggling to me that people are even still riding bicycles so equipped in the 21st Century.
I actually built my Surly from a frameset, primarily, because I refuse to ride a drop bar bicycle with anything other than integrated shifters.
I actually built my Surly from a frameset, primarily, because I refuse to ride a drop bar bicycle with anything other than integrated shifters.
#63
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
I like barends over downtube shifters. I like pretty things as much as the next guy, but I prefer function over form.
I will admit that a downtube shifter bike looks a tick better than a barend bike but you can make grey/silver barends look decent. Those black suntours would be hard to make look good on anything except for a bike with all black components. And just like the others said, that cable routing, sheesh! Running it under the full length of the bar tape is my preferred way. It might add a little more friction, but I prefer the way it looks. Hows that for contradicting myself?
I will admit that a downtube shifter bike looks a tick better than a barend bike but you can make grey/silver barends look decent. Those black suntours would be hard to make look good on anything except for a bike with all black components. And just like the others said, that cable routing, sheesh! Running it under the full length of the bar tape is my preferred way. It might add a little more friction, but I prefer the way it looks. Hows that for contradicting myself?
#64
Senior Member
Join Date: Aug 2010
Location: Liberty, Missouri
Posts: 3,120
Bikes: 1966 Paramount | 1971 Raleigh International | ca. 1970 Bernard Carre | 1989 Waterford Paramount | 2012 Boulder Brevet | 2019 Specialized Diverge
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Liked 78 Times
in
41 Posts
They're not for everyone, but like any component a rider has to give him or herself a chance to get the hang of using them. Someone told me they'd put a set on and rode for a couple miles and decided they "hated 'em." Jeez. A couple miles?
I have a pair on my Carre and I really like how handy they are when riding in the drops. It's not a big deal to reach down to shift, which I do intuitively with the palm of my hand to push down, and a finger to pull up. As for DT shifters being "extinct"... I beg to differ. They are my preferred shifting mechanism and I've got 'em on most of my bikes. I far prefer them over shifters integrated into the brake levers. But vive la difference! We all have our preferences.
#65
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
Same. I tried gripshifts once on a mountain bike and hated them immediately. I would accidentally shift all the time and the tiny stationary portion of the grip that was leftover was way too small for my hands. Gimme a trigger shifter or gimme single speed.
#66
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,801
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 157 Post(s)
Tagged: 0 Thread(s)
Quoted: 2357 Post(s)
Liked 5,351 Times
in
1,859 Posts
Bar end shifters, stem shifters, and downtube shifters are extinct. It's mind boggling to me that people are even still riding bicycles so equipped in the 21st Century.
I actually built my Surly from a frameset, primarily, because I refuse to ride a drop bar bicycle with anything other than integrated shifters.
I actually built my Surly from a frameset, primarily, because I refuse to ride a drop bar bicycle with anything other than integrated shifters.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#67
Senior Member
Join Date: Oct 2011
Location: New Mexico
Posts: 855
Bikes: Surly Disc Trucker, Ribble Nero Corsa, Surly Karate Monkey, Surly Ice Cream Truck, Cannondale MT800, Evil Insurgent
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#68
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,849
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1410 Post(s)
Liked 1,367 Times
in
860 Posts
I originally built the UO-8 from a bare frame -- I worked at a Peugeot-Nishiki dealership at the time -- for my wife, who want stemed shifters and UO-18 upright bars, which are similar to MTB bars. When she decided she preferred riding trails over streets, because of traffic intimidation, I built her a mountain bike and repurposed the UO-8 as my commuter and shopping beater. With its disproportionately long top tube and a downtube-mounted cable stop already bolted in place, drop bars and SunTour ratchet barcons were a natural choice, and they have worked superbly. My other road bikes all have downtube shifters, and I do not understand the comments about barcons being just as destabilizing or "inconvenient." In contrast, I find that the barcons give me fast access to gear changes, while maintaining two-hand control on the bars. Yes, the response is a bit slower than with DT levers, but it is not bad, so consider me a big fan of barcons. I bring the cables straight out in front, at the base of the bar bend.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#69
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,785
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 11104 Post(s)
Liked 7,712 Times
in
4,293 Posts
With that said, any loose cable or even bent hanger makes STIs useless while bar ends in friction mode will still work.
I agree that the claim of servicability is often repeated and overused, but it isnt nonsense like you claim.
#70
Senior Member
Join Date: Jul 2009
Location: Boston, MA
Posts: 1,541
Bikes: Bianchi Volpe, ANT 3-speed roadster, New Albion Privateer singlespeed, Raleigh One Way singlespeed, Raleigh Professional "retro roadie" rebuild, 198? Fuji(?) franken-5-speed, 1937 Raleigh Tourist, 1952 Raleigh Sports, 1966 Raleigh Sports step-through
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Liked 27 Times
in
18 Posts
#71
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,017
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 803 Times
in
392 Posts
Well played, sir!
Come to think of it, I had a set of those on a Cannondale R-900 some time back.
Come to think of it, I had a set of those on a Cannondale R-900 some time back.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
#72
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 393 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
My only dislike about Gevenalle shifters is the exposed cable that gets in the way of a handlebar bag. If you're on the hoods, they are just as ergo and handy as brifters. And permit almost any downtube shifter to be used, including friction.
#73
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,262
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 272 Post(s)
Tagged: 0 Thread(s)
Quoted: 4577 Post(s)
Liked 6,566 Times
in
3,770 Posts
Love em, plain, simple, period. Yes I ride brifters too.
#74
Senior Member
I'm laughing about this. My first trip out with DT shifter-equipped bike. Reached down to shift, swerved into traffic and nearly died, tried again, put my fingers right in the spokes BZZZZZZZZZZZ OWWW !!!!!!MOTHER MULCHER!!!!!! Never again. Back to nice, safe bar-ends.
#75
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 348 Times
in
176 Posts
I love STI and ergo - but STI and ergos get gummed up...springs break...they don't always survive a crash...
To say they're as durable as DT/barcons is just silly.
To say they're as durable as DT/barcons is just silly.