Yet another PX10 restoration.....
#1
Full Member
Thread Starter
Yet another PX10 restoration.....
I know there are alot of these postings, so bear with me. I believe this is a 1973, which is what was stamped on the Brooks saddle frame and judging from others I've seen. The last owner said it came to him with turkey levers, which he replaced with the aero levers. So, my theory is, judging from the vintage of the rest of the parts, when it was bought new, someone replaced the wheelset with 27" clinchers, replaced the 21t rear cog with a 32 tooth rear cog (but kept the 52t 45t chainrings), replaced the rear derailleur with a larger Simplex, and replaced the Mafac brakes with the Universal side pull to fit to the 27" wheels, and put in the bar-ende shifters. And then the front derailleur was replaced somewhere along the line. But I have wanted one of these for (oh, about 45 years, off and on), had most of the parts I wanted to swap on hand....
#2
Full Member
Thread Starter
The left crank bolt was severely rusted, so I soaked it in Kroil for a few days, and then drilled into it and applied a reverse helical extractor. Hadn't used one of those before and was relieved that it worked.
#3
Full Member
Thread Starter
Cleaned out the rust spots on the frame, touched up with a little bottle of Rust-Oleum appliance white touch-up that cost $3.25, wet sanded, and then Meguires, new UV laminate decals, and waxed. Swapped the crank for a 52t-42t Stronglight, put on a tubular wheelset with a 24t cog, returned to Mafac brakes, replaced the shifters and derailleurs (Simplex except for the front--which is a Huret to keep it all French), re-tapped the pedal threads and went with SPD pedals, and made a couple other small changes. Not everything is 1973 original, but close enough for me! Have been riding and making some adjustments and quite like it! It tracks nice and straight with hands off (which I am never very comfortable with). Will stick with the Ava stem for now, but will watch that closely.
#4
Senior Member
Great work! And I never get tired of seeing PX10 restorations.
#5
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,266
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,207 Times
in
703 Posts
Beautiful!
Someone else is bound to warn you, but is that stem in far enough? Just thought it was worth a mention...
Someone else is bound to warn you, but is that stem in far enough? Just thought it was worth a mention...
#6
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,750
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 2,092 Times
in
1,145 Posts
Very nice. I waited 43 years for mine.
#7
Senior Member
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,782
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 766 Post(s)
Liked 666 Times
in
353 Posts
Yes, very nice!.
Not to one-up you, but I waited 48 years for mine.
I agree with the previous comment about checking the stem insertion--it looks to me to be well about the minimum insertion line.
Not to one-up you, but I waited 48 years for mine.
I agree with the previous comment about checking the stem insertion--it looks to me to be well about the minimum insertion line.
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#8
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
Nice work on your PX-10, kudos for saving the original paint, even if it needed new decals. I like the chrome Simplex downtube cable guide, it's much better than that ugly plastic one, a nice classic touch. Nice work!
I'd suggest that your frame is a 1972, since it has the plain Dubois lugs. The 1971 and 1973 models had the Professional lugs.
I'd suggest that your frame is a 1972, since it has the plain Dubois lugs. The 1971 and 1973 models had the Professional lugs.
#9
Full Member
Thread Starter
Thank you for that note--I had been watching that, and started from what I thought was the highest safe position as I fitted into the bike, but I'll lower it a bit before the next ride!
#10
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,508
Bikes: A bunch of old bikes and a few new ones
Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 5913 Post(s)
Liked 3,567 Times
in
2,120 Posts
Very, very nice. I picked up a Mercier 300 recently that I'm looking forward to rebuilding.
#12
Senior Member
Join Date: Sep 2014
Location: Irvine, CA
Posts: 604
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Likes: 0
Liked 13 Times
in
12 Posts
Very nice - Impressed with the cord wrapping on the bar tape.
Warms my heart bringing these back toward original.
Keep that long cage - i use one for my hill climbing (e.g., eroica) setup.
Warms my heart bringing these back toward original.
Keep that long cage - i use one for my hill climbing (e.g., eroica) setup.
#13
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,261
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 824 Post(s)
Liked 1,434 Times
in
699 Posts
Lovely bike and excellent return to glory! I'm with jj1091, the plain Nervex DuBois lugs, painted black, combined with the frame angles AND the 531 decal at the top of the seat tube say 1972 to me. In '73 they switched the 531 decal to the top of the down tube, and the ones I have seen had steeper angles. The Nervex Pro lugs came and went over the next couple of years, I suspect due to availability.
#14
Senior Member
Join Date: Mar 2005
Location: Pinole, CA, USA
Posts: 17,392
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 443 Post(s)
Likes: 0
Liked 28 Times
in
26 Posts
Lovely bike and excellent return to glory! I'm with jj1091, the plain Nervex DuBois lugs, painted black, combined with the frame angles AND the 531 decal at the top of the seat tube say 1972 to me. In '73 they switched the 531 decal to the top of the down tube, and the ones I have seen had steeper angles. The Nervex Pro lugs came and went over the next couple of years, I suspect due to availability.
#15
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,261
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 824 Post(s)
Liked 1,434 Times
in
699 Posts
#16
Full Member
Thread Starter
Then checked around on line and found Sheldon Brown recommended 50mm as a minimum: Hands Up (Or Down)! Adjusting Handlebar Stem Height on Your Bicycle
I don't want to be at the bare minimum, and am fairly confident 60 will work out for me, for how I plan to use this bike (morning exercise for 45 minutes or an hour, not long distance).
Will be keeping a close eye on this in any event, and may ultimately swap out the stem anyway--but did want to give the original a try.
Thanks again for raising the issue!
#17
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,838
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1405 Post(s)
Liked 1,356 Times
in
855 Posts
That is a great-looking bike and a superb restoration. The 52-42/14-24 classic 1.5-step is a great alternative to the stock 52-45/14-21.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#19
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,591
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 513 Post(s)
Tagged: 0 Thread(s)
Quoted: 7397 Post(s)
Liked 2,572 Times
in
1,499 Posts
Outstanding work. I saw the first pictures and thought it's not necessary to do much on this bike. Then I saw your work, and I'm glad you did it your way.
It's a nice bike, isn't it?
It's a nice bike, isn't it?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#20
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,797
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 958 Post(s)
Liked 3,122 Times
in
1,011 Posts
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#21
Senior Member
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,782
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 766 Post(s)
Liked 666 Times
in
353 Posts
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#22
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,221
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 270 Post(s)
Tagged: 0 Thread(s)
Quoted: 4564 Post(s)
Liked 6,537 Times
in
3,751 Posts
Still waiting for mine......
#23
Senior Member
Join Date: Jun 2018
Location: Hayward, CA
Posts: 102
Bikes: 1983 Peugeot PSV10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
As Kactus said above, I never get tired of PX10 restorations either.
I love how it turned out and it made me excited to start on mine in a couple of weeks! I was hoping I could ask for some pointers. I love the details so was wondering about:
• the red pulleys (should I get some online or spray them white a thin layer of red and clear coat)
• what kind of cord did you use to wrapping the handlebar tape
• the oval decal by the seatpost (did you touch that up yourself or buy the decal) I did a quick google search and could only find gold ones
I'll attach photos in the next post.
I love how it turned out and it made me excited to start on mine in a couple of weeks! I was hoping I could ask for some pointers. I love the details so was wondering about:
• the red pulleys (should I get some online or spray them white a thin layer of red and clear coat)
• what kind of cord did you use to wrapping the handlebar tape
• the oval decal by the seatpost (did you touch that up yourself or buy the decal) I did a quick google search and could only find gold ones
I'll attach photos in the next post.
#24
Senior Member
Join Date: Jun 2018
Location: Hayward, CA
Posts: 102
Bikes: 1983 Peugeot PSV10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
Sorry for the screenshot photos. My phone wasn't giving me an option to press down and save the photos from ebay
I haven't received the bike yet but worried about the seat post
Going to try my best to polish and and shine the components.
Only ordered the Reynolds stickers to replace
Are Rigida rims of decent quality? Not too concerned about getting the original rims but I do like some of the vintage Mavic rims and the red stickers
#25
So it goes.
Join Date: Apr 2014
Location: W. Tennessee
Posts: 967
Bikes: A few. Quite a few.
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 433 Post(s)
Liked 645 Times
in
263 Posts
Very nice indeed, great job of refurbishment! I picked up a 1972 last year - had no idea I needed one but after setting up and riding I discovered what I've been missing. Oh yeah...