SRAM Red GXP crank installation
#1
Newbie
Thread Starter
Join Date: Apr 2018
Posts: 2
Likes: 0
Liked 0 Times
in
0 Posts
SRAM Red GXP crank installation
Hi,
I'm trying to install a Sram Red GXP crank on a Cervelo S5 2014 with a Wheels Manufacturing Bottom Bracket but I have a hard time compressing the wave washer enough that it's almost flat. The Wheels Mfg installation guide says to add some cup spacer on the non drive side but if I do that, my chainring is rubbing against my chainstay. Should I add spindle spacers instead ? On which side ?
Thanks for the help.
I'm trying to install a Sram Red GXP crank on a Cervelo S5 2014 with a Wheels Manufacturing Bottom Bracket but I have a hard time compressing the wave washer enough that it's almost flat. The Wheels Mfg installation guide says to add some cup spacer on the non drive side but if I do that, my chainring is rubbing against my chainstay. Should I add spindle spacers instead ? On which side ?
Thanks for the help.
#2
Banned
Join Date: Mar 2018
Location: Providence
Posts: 732
Bikes: Specialized tarmac sl2 giant tcx zero
Likes: 0
Liked 3 Times
in
3 Posts
i know you usually add the thicker spacer on the drive side , but if its hitting the frame you might not need one , just the internal ring adapters , but each company deals with gxp in a different way !!!!