Tubulars - A Different Slant
#26
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,448
Bikes: Bikes??? Thought this was social media?!?
Liked 4,986 Times
in
2,294 Posts
Agreed, not everyone cares for tubulars (and that's a BIG OK) and non-racer folks, in reality, probably don't ride faster with tubulars. Any efficiency gains by riding light wheels is likely to be negligible unless measured over mts/big hills and longer distance rides. [truth is: engine+gearing (and not crashing) is almost all of it]
Better to have a mediocre frame and light wheels than a light frame with mediocre wheels. But guys in the 41 are soooo new frame oriented.
'my new frame only weighs 816gms, ..... it feels faster and 5% stiffer than my old one which weighed 920gms' = hahahahahahahahaha!
But what do I know?
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 10-21-19 at 04:17 PM.
Likes For PepeM:
#28
I do, from the guys and girls who get free stuff every year.
Ultimately, the gullible early adopters/trend followers with lots of disposable income pay the bills. Evidence: 12-speed, tubeless, disk brake snob-brand road bikes for the weekend-warrior lawyers and dentists.
Ultimately, the gullible early adopters/trend followers with lots of disposable income pay the bills. Evidence: 12-speed, tubeless, disk brake snob-brand road bikes for the weekend-warrior lawyers and dentists.
#29
Senior Member
I do, from the guys and girls who get free stuff every year.
Ultimately, the gullible early adopters/trend followers with lots of disposable income pay the bills. Evidence: 12-speed, tubeless, disk brake snob-brand road bikes for the weekend-warrior lawyers and dentists.
Ultimately, the gullible early adopters/trend followers with lots of disposable income pay the bills. Evidence: 12-speed, tubeless, disk brake snob-brand road bikes for the weekend-warrior lawyers and dentists.
DB, Tubeless, 12-speed 1x, for MTB or CX has to be nice, especially if electric
Most cyclist have a disposable income, just the amount that varies
#30
Most of the extra margin goes for big advertising budgets and pharmaceuticals for sponsored athletes.
As far as disc brakes, tubeless, 1 x whatever speeds, we were talking about road bikes here. Sure, these are worthwhile features on mountain and cross bikes, but are inappropriate impediments on real road bikes. A lot of recent road riders come from MTB backgrounds, and the bike industry is there to sell these inexperienced converts what they are comfortable with, and what they think they need. However misguided these perceived needs...
#31
Senior Member
Re aero,
my test is a riding buddy who outweighs me substantially, and always would coast past me on the descents.
When I got the Easton 60mm wheels, it reversed. Later he got a new bike w/ deeper wheels and it became more even.
Just recently one of those wheels fell apart and last weekend he was on the old bike (Spec Roubaix) w/ the alloy wheels, and I once again coasted past him on the descents.
my test is a riding buddy who outweighs me substantially, and always would coast past me on the descents.
When I got the Easton 60mm wheels, it reversed. Later he got a new bike w/ deeper wheels and it became more even.
Just recently one of those wheels fell apart and last weekend he was on the old bike (Spec Roubaix) w/ the alloy wheels, and I once again coasted past him on the descents.
#32
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,060
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,088 Times
in
2,643 Posts
I rode tubulars for decades exclusively, to train, to commute, to race. Went to clinchers in the late '90s. I am going back. The driving reason? I rolled an old clincher off the rear rim when it blew. At 25 mph. I never, ever want to see that happen going 40+, ever. I broke a collarbone, hit my head, broke rib(s?) and suffered an acre of road rash. (I kept my mouth shut re: the rib(s) to save 4 chest X-rays with of radiation and several hundred dollars.)
Now, I've blown tubulars, both new and old, front and rear going 40+ downhill. Not a big deal. Stop and change the tire and ride on. (Yes,this does assume a good glue job. But doing a good road-worthy glue job in areas without extreme heat is not difficult. I used to use Tubasti. Never removed the old glue. Older rims were totally dependable and road changed worked well with older tires; no pre-gluing needed. I just made it a point to be gentle on curves. By the time I got home, they were pretty well stuck but I would pull the spare and put on an either new tire or repaired tire I trusted and put the spare under the seat to use again.
If I lived in a really hot place, I research the best glues to be using. The pros race those conditions so the answers are out there. I raced and lived in New England and lived in the Bay Area and Tubasti worked just fine in both places year 'round. (I raced Clement on my race wheels, Tubasti on my training/spare/club race wheels. Never removed the Clement either. The glue I trusted the least was the first on a new rim.)
So, when it is time to go new tires and wheels, it's going to be tubulars so I can descend in confidence. (I love the Vittoria G+. Those in tubular on light, strong rims? I'll be in a heaven I haven't seen in many years.)
Ben
Now, I've blown tubulars, both new and old, front and rear going 40+ downhill. Not a big deal. Stop and change the tire and ride on. (Yes,this does assume a good glue job. But doing a good road-worthy glue job in areas without extreme heat is not difficult. I used to use Tubasti. Never removed the old glue. Older rims were totally dependable and road changed worked well with older tires; no pre-gluing needed. I just made it a point to be gentle on curves. By the time I got home, they were pretty well stuck but I would pull the spare and put on an either new tire or repaired tire I trusted and put the spare under the seat to use again.
If I lived in a really hot place, I research the best glues to be using. The pros race those conditions so the answers are out there. I raced and lived in New England and lived in the Bay Area and Tubasti worked just fine in both places year 'round. (I raced Clement on my race wheels, Tubasti on my training/spare/club race wheels. Never removed the Clement either. The glue I trusted the least was the first on a new rim.)
So, when it is time to go new tires and wheels, it's going to be tubulars so I can descend in confidence. (I love the Vittoria G+. Those in tubular on light, strong rims? I'll be in a heaven I haven't seen in many years.)
Ben
#33
Senior Member
How do these things impede a real road bike (with the exception of 1x, which I never see on any road bikes)? What is a real road bike anyway?
#34
After buying my Synapse Ultegra Di2 I knew the Askium rims & clinchers were the first thing I would upgrade. Left me with the choice of staying with tubulars after 20+ years or clinchers. Campy Bora tubular carbon rims it was. I picked up a pair of Veloflex Vlanderen 28 tires and love the setup. Orange seal has given me many trouble free miles. Don’t care about rolling resistance, I just love the way they ride. As for statements about tubulars being so hard to change on the road they must come from those who don’t ride tubulars. All I can say is people don’t know what they are missing.
#35
Senior Member
Join Date: Aug 2004
Location: Prague, Czech Republic
Posts: 2,754
Bikes: Merlin Extra Light, Orbea Orca, Ritchey Outback,Tomac Revolver Mountain Bike, Cannondale Crit 3.0 now used for time trials.
Liked 55 Times
in
34 Posts
tubulars with a small amount of stan's or orangeseal are extremely flat proof.
Tubular wheels are lighter.
Tubular tires from uk/eu suppliers ~ $65 if you wait for deals (veloflex arenberg/roubaix/vlanderen).
Tubular tape is easy, if you don't wish to glue.
If you are serious about lightweight wheels, the problem with tubulars is in your head.
High-end clinchers with latex tubes are super nice as well - and about the same price.
Edit: Vittoria g+ tubulars for $49, veloflex from $65.
https://www.merlincycles.com/road-bi...e_type=tubular
i think it's funny, guys riding $5000+ bikes, disc brakes, carbon wheels complaining a small price difference for tubulars as a reason not to convert.
Tubular wheels are lighter.
Tubular tires from uk/eu suppliers ~ $65 if you wait for deals (veloflex arenberg/roubaix/vlanderen).
Tubular tape is easy, if you don't wish to glue.
If you are serious about lightweight wheels, the problem with tubulars is in your head.
High-end clinchers with latex tubes are super nice as well - and about the same price.
Edit: Vittoria g+ tubulars for $49, veloflex from $65.
https://www.merlincycles.com/road-bi...e_type=tubular
i think it's funny, guys riding $5000+ bikes, disc brakes, carbon wheels complaining a small price difference for tubulars as a reason not to convert.
Likes For Fox Farm:
#36
In contrast, my last clincher blowout occurred at little more than a walking pace. It took 20 years of mountain bike handling skills to keep my bod off of the pavement. If this blowout would have have happened at speed, or on a corner.....
As I posted earlier, the reason why elite-level riding (in all disciplines, including mountain biking) is done on tubulars is due to lower rotating mass. But safety is a close second.
#37
Senior Member
I would glue my own. You have a lot (skin) riding on the quality of the install. Many of the young mechanics don’t have much experience gluing tires. The more you do, the better you will get at it.
#38
Globo Gym lifetime member
Join Date: Jan 2006
Location: Redmond, Oregon
Posts: 5,204
Bikes: Fast ones
Liked 614 Times
in
306 Posts
I'm not sure why you keep spouting this garbage. As an elite level rider, I can tell you the main reason riders use tubulars is because they can be ridden while flat while waiting for the team/wheel car. You won't find many pro mtb'ers running tubular tires anymore.
Likes For Cypress:
#39
Newbie racer
Right now the fastest tire is a Corsa Speed TLR. Put that onto a "modern width" tubeless 60mm wheelset and call it a day.
Don't bother as the tubular versions right now are a touch slower. I run tubs on my trispoke and disc wheel because it's marginally faster at the speed I TT at versus the CRR gain of modern size clinchers....for the money. But the drawback is a 19mm front 23mm rear race only setup. Not a daily rider friendly kinda thing.
Don't bother as the tubular versions right now are a touch slower. I run tubs on my trispoke and disc wheel because it's marginally faster at the speed I TT at versus the CRR gain of modern size clinchers....for the money. But the drawback is a 19mm front 23mm rear race only setup. Not a daily rider friendly kinda thing.
#40
Senior Member
This draws on the canard that road tubulars coming off is even a thing- it just isn't (CX is a different story).
Pro race mechanics use minimal glue and you may have heard of glue softening on 140˚ roads in Dubai but even so thousands of tires have stayed on over hundreds of thousands of racer-miles.
Having a shop glue the tires is probably more likely to give you sprained thumbs trying to eventually get the tire off.
If you have any direct experience otherwise, post it here:
https://www.bikeforums.net/road-cycl...d-tubular.html
#41
Senior Member
4 years pro XC, and I never used a tubular.
Likes For pickettt:
#42
Senior Member
Join Date: Feb 2018
Posts: 1,410
Bikes: 2017 Specialized Allez Sprint Comp
Liked 344 Times
in
247 Posts
I sliced my front (clincher) tire going over 30mph downhill and was able to save it - though it did feel sketchy, and I don’t know what would have happened if I had to turn or brake suddenly.
#43
Senior Member
This draws on the canard that road tubulars coming off is even a thing- it just isn't (CX is a different story).
Pro race mechanics use minimal glue and you may have heard of glue softening on 140˚ roads in Dubai but even so thousands of tires have stayed on over hundreds of thousands of racer-miles.
Having a shop glue the tires is probably more likely to give you sprained thumbs trying to eventually get the tire off.
If you have any direct experience otherwise, post it here:
https://www.bikeforums.net/road-cycl...d-tubular.html
Pro race mechanics use minimal glue and you may have heard of glue softening on 140˚ roads in Dubai but even so thousands of tires have stayed on over hundreds of thousands of racer-miles.
Having a shop glue the tires is probably more likely to give you sprained thumbs trying to eventually get the tire off.
If you have any direct experience otherwise, post it here:
https://www.bikeforums.net/road-cycl...d-tubular.html
#44
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,060
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,088 Times
in
2,643 Posts
Just curious, were you using a tubeless-ready rim? One with strong bead shelves that make it hard to remove the tire? It’s a feature that’s becoming quite popular on modern road rims and I don’t know how well-developed or common it was until very recently.
I sliced my front (clincher) tire going over 30mph downhill and was able to save it - though it did feel sketchy, and I don’t know what would have happened if I had to turn or brake suddenly.
I sliced my front (clincher) tire going over 30mph downhill and was able to save it - though it did feel sketchy, and I don’t know what would have happened if I had to turn or brake suddenly.
Yes, in theory, those new rims should stop what I saw from happening. But as one who has ridden long enough to see a few of those rare events that "theory" rules out, I am getting less willing to take chances. And I know glue does work to keep fabric and rubber on aluminum rims, even if the tire is blown ot shreds. Also that aluminum rims are not much better than rubber on ice for traction. And jamming a tire in a seatstay or fork does not end well.
Ben
#46
Senior Member
#47
Senior Member
Not an argument. I've noticed over the years that many folks think of tubulars as unsafe because they could roll off,
but I have hardly heard of a single first-hand, or even very reliable second-hand account of it happening. Maybe a report of a rolled tire at a crit race.
So just interested in adding data points.
#48
Senior Member
Not an argument. I've noticed over the years that many folks think of tubulars as unsafe because they could roll off,
but I have hardly heard of a single first-hand, or even very reliable second-hand account of it happening. Maybe a report of a rolled tire at a crit race.
So just interested in adding data points.
but I have hardly heard of a single first-hand, or even very reliable second-hand account of it happening. Maybe a report of a rolled tire at a crit race.
So just interested in adding data points.
#49
Senior Member
I have seen tires at criterium and track events. Mine was a front wheel in a 35 mile downhill into a corner. The problem I have found with someone else gluing you’re tires is many times they don’t know you or how you are going to use the wheel. A 130 lb roadie riding his wheels on a fixie is much different than a 210 lb sprinter on a 250 meter indoor track in terms of demand on the tire and its glue job. I remember seeing a rider doing sprint training have both his tires come off as he accelerated through the corner.
Thanks.
#50
Senior Member
Only pair of tubs I have came with the CX bike bought 2nd hand, and those grifos are great for racing
I could see having a road set in the future, with the newer road tubs being tubless-ish now days
Corsa tubs would be very nice though too
I could see having a road set in the future, with the newer road tubs being tubless-ish now days
Corsa tubs would be very nice though too