Interesting finds around the web
#2626
Elitist
Thread Starter
If you are #1 , then you are fighting the wind by yourself.
If you are #3 , then you have a draft, but you have to pass two people to win.
If you are #2 , then you have the benefit of a draft and only have to pass 1 person to win.
#2627
Member
Shimano released some track shoes called the RC901T. They look like a modification of their top end RC901 road shoe but with one boa dial instead of two. They look interesting and aren't too terribly priced.
I would link but i'm not allowed to.
I would link but i'm not allowed to.
#2628
#2631
Lapped 3x
They should have left off the strap near the toe. Any trackie using straps won't touch them, and any trackie not using straps will just grab the regular road model.
#2634
I'm honestly not sure what makes those Shimano shoes better than regular S-phyres for the track.
#2635
Elitist
Thread Starter
I mean, I get it. Being able to micro-adjust your shoes when on a long road ride with the turn of the wheel is nice as your feet swell. But, that's not gonna happen on the track for several reasons. So, the main benefit of BOA shoes is simply lost on trackies.
#2637
Elitist
Thread Starter
FYI, you can find metric Allen screws at local hardware stores: https://www.lowes.com/pl/Machine-scr...ent=4294710182
The type of screws that are used in stems, seat post clamps, and other odds and ends on the bike.
So, if your screws are stripped or simply looking shabby after lots of use, you may be able to find what you need at the local hardware store. Take one of the ones you intend to replace into the store with you to make sure you get the right size and thread pitch. Look for what you need in the Metric area (most bike screws, nuts, and bolts are Metric).
#2638
FYI, you can find metric Allen screws at local hardware stores: https://www.lowes.com/pl/Machine-scr...ent=4294710182
The type of screws that are used in stems, seat post clamps, and other odds and ends on the bike.
So, if your screws are stripped or simply looking shabby after lots of use, you may be able to find what you need at the local hardware store. Take one of the ones you intend to replace into the store with you to make sure you get the right size and thread pitch. Look for what you need in the Metric area (most bike screws, nuts, and bolts are Metric).
#2639
Senior Member
#2640
Senior Member
FYI, you can find metric Allen screws at local hardware stores: https://www.lowes.com/pl/Machine-scr...ent=4294710182
The type of screws that are used in stems, seat post clamps, and other odds and ends on the bike.
So, if your screws are stripped or simply looking shabby after lots of use, you may be able to find what you need at the local hardware store. Take one of the ones you intend to replace into the store with you to make sure you get the right size and thread pitch. Look for what you need in the Metric area (most bike screws, nuts, and bolts are Metric).
Some of the mass packed stuff, and a lot of the stuff in big box stores, is much lower quality. Sometimes that's okay - I use mass packed stainless sheet metal screws for downspouts, various projects around the house, etc). But for quality, machine threads, you can screw up something really expensive or really difficult to fix (a frame, a shifter, a derailleur) with bad threads and it's not worth saving 30 cents or whatever. I've literally tossed a new box of bolts into metal recycling because they were so bad.
__________________
"...during the Lance years, being fit became the No. 1 thing. Totally the only thing. It’s a big part of what we do, but fitness is not the only thing. There’s skills, there’s tactics … there’s all kinds of stuff..." Tim Johnson
"...during the Lance years, being fit became the No. 1 thing. Totally the only thing. It’s a big part of what we do, but fitness is not the only thing. There’s skills, there’s tactics … there’s all kinds of stuff..." Tim Johnson
Likes For carpediemracing:
#2641
Member
What shoes would yall recommend for track? I am looking around for a new pair as my specialized Torch 2.0's I am not able to get my shoes tight as I would like for sprints(toe box loose and mid foot tight enough). I was looking at those new Shimano shoes and some lace up shoes such as the Giro Empires, Lake CX1's and Bonts's after browsing the forum. Are lace ups the way to go for sprinting?
#2642
Senior Member
What shoes would yall recommend for track? I am looking around for a new pair as my specialized Torch 2.0's I am not able to get my shoes tight as I would like for sprints(toe box loose and mid foot tight enough). I was looking at those new Shimano shoes and some lace up shoes such as the Giro Empires, Lake CX1's and Bonts's after browsing the forum. Are lace ups the way to go for sprinting?
Last edited by AmahlAmahlAmahl; 12-22-19 at 08:59 PM.
#2643
Senior Member
I'm loving the Lake lace up carbon shoes, come in wide sizes and about 50% the price of Bont's. The wide size was a game changer for me. All personal preference, of course.
#2644
I wanted to fit Bonts, but had to give up eventually.
Switched to Fizik R1 PowerStraps.
They were a limited version made for the movistar guys, but straps made from the same material as sprinting straps and a top level carbon sole was hard to argue with.
Switched to Fizik R1 PowerStraps.
They were a limited version made for the movistar guys, but straps made from the same material as sprinting straps and a top level carbon sole was hard to argue with.
#2645
The Lake CX1s are good. I had to replace the laces - I went with waxed hockey skate laces, which are much stronger. Probably the best bang for the buck option.
Likes For topflightpro:
#2646
Elitist
Thread Starter
I want to take this opportunity to remind newer users that they can convert their favorite velcro shoes to lace-ups by having a cobbler cut the straps and punch lace holes or doing it yourself.
Over the years, I've converted 3 pairs of shoes to lace-ups (1 pair of Sidi and 2 pair of Fizik). All 3 had the same configuration: 1 ratcheting strap and 2 velcro straps. I kept the ratcheting strap.
There might be pics in the DIY thread, but I don't have time to look now.
This could be a nice winter project for some...especially if you have some old cycling shoes around.
My absolute favorite track shoes were created this way: 1st generation Fizik R1 (ostrich skin):
Over the years, I've converted 3 pairs of shoes to lace-ups (1 pair of Sidi and 2 pair of Fizik). All 3 had the same configuration: 1 ratcheting strap and 2 velcro straps. I kept the ratcheting strap.
There might be pics in the DIY thread, but I don't have time to look now.
This could be a nice winter project for some...especially if you have some old cycling shoes around.
My absolute favorite track shoes were created this way: 1st generation Fizik R1 (ostrich skin):
#2647
Elitist
Thread Starter
Took a quick snap:
I've had these since, what? 2011? They haven't stretched a millimeter.
The Sidi Genius 5 I had became floppy like old gym socks after half a season. Comfy for casual riding. Sucked for performance riding.
I've had these since, what? 2011? They haven't stretched a millimeter.
The Sidi Genius 5 I had became floppy like old gym socks after half a season. Comfy for casual riding. Sucked for performance riding.
#2648
Yep, I generally scour ebay for old rough/damaged Bont's, then chop them up and lace them. So long as the sole is in (relatively) good shape you can fix/modify most uppers. I've got a pair of old Bont Vaypor's I cut the straps off of (like Carletons Fiziks) then laced and painted. $40 pair of Vaypor T's basically.
#2649
Senior Member
Indeed, the laces don't hold up. I replaced with some stiff nylon ones, done. Otherwise best shoes I've ever had. These Lakes are being marketed as "retro" and maybe "touring oriented", but the uppers are so stiff that I don't think they'd actually be good for that purpose. Great track shoes.
#2650
I'm on Sidi Kaos - two points tight Boa lace for the front part (I hate feeling it loose) and the good and old buckled serrated large strap.
They use a "pierced" material that stretched and laced with use for some colors combination, but there is also this more "continuous" and firm material.
Tried the Bont Vaypor but it simply doesn't fit my feet shape. Too large on front part, never feel it tight enough. Middle finger touching the front curve.. etc. Maybe with some heating/molding - didn't try.
They use a "pierced" material that stretched and laced with use for some colors combination, but there is also this more "continuous" and firm material.
Tried the Bont Vaypor but it simply doesn't fit my feet shape. Too large on front part, never feel it tight enough. Middle finger touching the front curve.. etc. Maybe with some heating/molding - didn't try.