Has anyone here purchased a Carbon Frame from China?
#1
Newbie
Thread Starter
Join Date: Jul 2017
Posts: 52
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Has anyone here purchased a Carbon Frame from China?
Looking to upgrade mine. I am getting mysterious creaks on climbs and the bicycle store mechanic cannot find the issue. My frame is 6 or 7 years old now and feel it might be time to replace it anyway.
Anyone here get one of those knockoff frames from one the Chinese manufacturers?
Please reply with your experience! Thanks!
Anyone here get one of those knockoff frames from one the Chinese manufacturers?
Please reply with your experience! Thanks!
#2
Senior Member
People have many different thoughts on this, but I feel better on a frame that a major manufacturer feels good enough about to put their name on it. If a Specialized frame fails spectacularly for no apparent reason and you are seriously hurt, they can be sued so they have more reason to sell you a frame that isn't going to fail like that. Knockoff Chinese frame there is no recourse for an injured rider.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
Likes For RoadKill:
#3
Just Keep Pedaling
Join Date: Mar 2012
Location: Lakewood, CA
Posts: 3,355
Bikes: 99 Schwinn Mesa GS MTB, 15 Trek Domane 5.9 Dura-Ace, 17 Trek Emonda SL6 Pro & 18 Bianchi Vigorelli
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 251 Post(s)
Likes: 0
Liked 67 Times
in
34 Posts
people have many different thoughts on this, but i feel better on a frame that a major manufacturer feels good enough about to put their name on it. If a specialized frame fails spectacularly for no apparent reason and you are seriously hurt, they can be sued so they have more reason to sell you a frame that isn't going to fail like that. Knockoff chinese frame there is no recourse for an injured rider.
Some parts i'm fine with buying cheap junk, but not frames or wheels.
Some parts i'm fine with buying cheap junk, but not frames or wheels.
#4
Heft On Wheels
Join Date: Nov 2014
Location: South Dakota
Posts: 3,123
Bikes: Specialized,Cannondale,Argon 18
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times
in
346 Posts
People have many different thoughts on this, but I feel better on a frame that a major manufacturer feels good enough about to put their name on it. If a Specialized frame fails spectacularly for no apparent reason and you are seriously hurt, they can be sued so they have more reason to sell you a frame that isn't going to fail like that. Knockoff Chinese frame there is no recourse for an injured rider.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
100 percent spot on!
#5
Senior Member
A guy I ride with has a Chinese Bianchi. He bought the entire bike piece by piece from Aliexpress. The frame looks nice, but has given him a lot of trouble. The seatpost won't stay in place. He resorted to putting a few layers of tape on the seatpost. Similar issues with the stem/bar combination. The knockoff FFWD wheels have been fine for him so far though.
#6
Senior Member
Most people that have bought a carbon bike from most LBS brands have bought a Chinese frame.
Not much is made at the North Pole anymore.
Not much is made at the North Pole anymore.
#7
Senior Member
Join Date: Jan 2013
Location: Gatorland and BlueRidge heaven
Posts: 774
Bikes: 2021 Trek Domane SLR 7, 2012 Giant Defy 0, 2012 Trek Domane 6.2 P1, Bianchi Infinito CV disc Di2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 1,000 Times
in
250 Posts
I have a Trek Domane 6.2, a Giant Defy 0, and a Bianchi Infinito CV. Only the Giant frame says ‘made in Taiwan’. The Domane says ‘designed in Wisconsin’. I don’t know about the Bianchi....
__________________
Ride hard and ride on......
Ride hard and ride on......
#8
Senior Member
This is true. But there can be a big difference in manufacturing quality between the big Chinese brands like Merida and Giant and these smaller companies that just do open mold frames.
#9
Senior Member
But OP implied the country (or the people within it) have an influence on quality. I haven't seen scientific evidence showing how a Chinese person would be less capable than an american person. I think much of the "china made" discussion is more based on xenophobia and fear of being inferior than anything else.
I could turn the china fear around and claim nowadays bicycles are much better than ever (better MTB geometry, material, weight...). so someone could say when bicycles were made int he US they were worse because of that. But that isn't the case, it is all in the engineering, manufacturing processes and QC. and that can be done with any people, regardless of nationality.
#10
Senior Member
"designed in".... just means they want to trick the customer and don't declare it was actually made in a low wage country. you also should look at what year the bikes wehre made. there was a large shift towards production in china, or Asia, in the past years.
I agree, brand matters for QC, design etc. Especially for carbon where layering is so important for the function the design part is important.
But OP implied the country (or the people within it) have an influence on quality. I haven't seen scientific evidence showing how a Chinese person would be less capable than an american person. I think much of the "china made" discussion is more based on xenophobia and fear of being inferior than anything else.
I could turn the china fear around and claim nowadays bicycles are much better than ever (better MTB geometry, material, weight...). so someone could say when bicycles were made int he US they were worse because of that. But that isn't the case, it is all in the engineering, manufacturing processes and QC. and that can be done with any people, regardless of nationality.
I agree, brand matters for QC, design etc. Especially for carbon where layering is so important for the function the design part is important.
But OP implied the country (or the people within it) have an influence on quality. I haven't seen scientific evidence showing how a Chinese person would be less capable than an american person. I think much of the "china made" discussion is more based on xenophobia and fear of being inferior than anything else.
I could turn the china fear around and claim nowadays bicycles are much better than ever (better MTB geometry, material, weight...). so someone could say when bicycles were made int he US they were worse because of that. But that isn't the case, it is all in the engineering, manufacturing processes and QC. and that can be done with any people, regardless of nationality.
I didn't read it that way. He mentioned "knockoff" frames from China. I assumed he meant the fake ones on Aliexpress, DHGate, etc.
Likes For chadtrent:
#11
Banned
ROC is not the same country as PRC, though the C is China in both places.. Taiwan is the Go-To manufacturing of nice bicycles now..
want to buy direct via Alibaba, just to save money ? it happens..
want to buy direct via Alibaba, just to save money ? it happens..
Likes For fietsbob:
#12
Senior Member
I'm sure there are 1,000 like products and some are better than others. OP would be better served to ask about a specific one, than just asking for a blanket opinion. Same like asking if all ebay or amazon products are bad.
#13
2nd In Charge of My House
Join Date: Jun 2020
Location: Vancouver, Canada
Posts: 4
Bikes: Giant Defy Advanced 2, MEC 1971
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
If I could ...
I have been to China a couple of times and my wife goes there quite often as she works for an airline.
I have purchased Items and received gifts that were considered knock offs. Most of these being luxury goods. Most of the knock off stuff will last for a year at the best. Sometimes you will get a good quality knock off that might last longer.
The only thing that we now buy in China is prescription eye wear- glasses and sunglasses, not contact lenses.
I won’t use any electronics that are sold in the markets in China. These are not subject to rigorous QC as they would be if going to the general marketplace. If I were to have a fire or suffered an injury as a result of using a knock off electronic, I doubt my insurance will cover anything.
I would pass on a carbon frame from China or at least, anything sold that is not from a reputable brand. Your only asking for disappointment, potential injuries with no recourse. These knock off manufactures come and go and they will certainly deny ever having made it let alone selling it.
I hate spending a lot of money, but you get what you pay for.
I have been to China a couple of times and my wife goes there quite often as she works for an airline.
I have purchased Items and received gifts that were considered knock offs. Most of these being luxury goods. Most of the knock off stuff will last for a year at the best. Sometimes you will get a good quality knock off that might last longer.
The only thing that we now buy in China is prescription eye wear- glasses and sunglasses, not contact lenses.
I won’t use any electronics that are sold in the markets in China. These are not subject to rigorous QC as they would be if going to the general marketplace. If I were to have a fire or suffered an injury as a result of using a knock off electronic, I doubt my insurance will cover anything.
I would pass on a carbon frame from China or at least, anything sold that is not from a reputable brand. Your only asking for disappointment, potential injuries with no recourse. These knock off manufactures come and go and they will certainly deny ever having made it let alone selling it.
I hate spending a lot of money, but you get what you pay for.
#14
Senior Member
Creaks are hard to diagnose, and often involve a lot of trial and error. Having a creak is not necessarily a reason for a new frame
However if you want a new frame you could look at a bikes direct frame. I’ve had a number of their bikes/frames and been happy with them.
However if you want a new frame you could look at a bikes direct frame. I’ve had a number of their bikes/frames and been happy with them.
#15
Senior Member
Assuming knockoff is a forged product (uses the very same brandname, but not authorized by that brand) or a slightly altered name to deceive (i.e. Call it Trekx instead of Trek) it would be an inferior and likely dangerous product regardless of what country the knockoff was made in.
I'm sure there are 1,000 like products and some are better than others. OP would be better served to ask about a specific one, than just asking for a blanket opinion. Same like asking if all ebay or amazon products are bad.
I'm sure there are 1,000 like products and some are better than others. OP would be better served to ask about a specific one, than just asking for a blanket opinion. Same like asking if all ebay or amazon products are bad.
#16
Senior Member
Join Date: Jun 2013
Location: Yolo County, West Sacramento CA
Posts: 517
Bikes: Modified 26 inch frame Schwinn Varsity with 700c wheels and 10 speed cassette hub. Ryan Vanguard recumbent. 67cm 27"x1 1/4" Schwinn Sports Tourer from the 1980's. 1980's 68cm Nishiki Sebring with 700c aero wheels, 30 speeds, flat bar bicycle.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked 141 Times
in
102 Posts
People have many different thoughts on this, but I feel better on a frame that a major manufacturer feels good enough about to put their name on it. If a Specialized frame fails spectacularly for no apparent reason and you are seriously hurt, they can be sued so they have more reason to sell you a frame that isn't going to fail like that. Knockoff Chinese frame there is no recourse for an injured rider.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
Some parts I'm fine with buying cheap junk, but not frames or wheels.
Unfortunately it is not entirely true that a major bicycle manufacture like Specialized can be sued for a broken frame or fork. This is a particularly egregious legal problem that is only now being addressed in courts in Australia and the USA. Bicycle frames and forks are generally reliable products but sometimes a dud gets through and someone is injured or killed by a broken bicycle frame or fork. The suing starts and that is when you find out that these International bicycle manufacturing/sales corporations have shielded themselves very well from product liability lawsuits. The lawsuits almost always end up being thrown out because of jurisdictional disputes about who made what and in which country and by what other company and who sold it. Everyone points fingers at one another and claims innocence for themselves. Other countries may not have laws that cover product liability lawsuits and settlements. This has been a big problem concerning bicycle failure compensation for injured parties. Always inspect your bicycle for safety and mechanical integrity before riding. All frame materials fail and can injure or kill you.
#17
Newbie
Thread Starter
Join Date: Jul 2017
Posts: 52
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
I would love a Litespeed ti frame, for instance, but I would not like to spend 1800 bucks on one!
Guess I was hoping someone who actually bought something from, say, Workswell would have a word here.
#18
Senior Member
What qualifies as "fake"? What I am looking for is a quality frame that I don't have to pay a thousand bucks to get.
I would love a Litespeed ti frame, for instance, but I would not like to spend 1800 bucks on one!
Guess I was hoping someone who actually bought something from, say, Workswell would have a word here.
I would love a Litespeed ti frame, for instance, but I would not like to spend 1800 bucks on one!
Guess I was hoping someone who actually bought something from, say, Workswell would have a word here.
It's a Chinese frame that says Pinarello on it, but not an actual Pinarello. In all honesty that does not mean it's a bad frame. I've seen a lot of people riding similar frames and they love them. But to me a frame painted to be something it's not is a fake.
#19
Senior Member
Join Date: Jul 2019
Location: In the south but from North
Posts: 701
Bikes: Turner 5-Spot Burner converted; IBIS Ripley, Specialized Crave, Tommasini Sintesi, Cinelli Superstar, Tommasini X-Fire Gravel
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 406 Post(s)
Liked 390 Times
in
219 Posts
I go to China at least 6-8 times a year and have seen fake Apple iPhones to full on fake Ferrari's and Ford Mustangs. I have been to Apple stores that are completely 100% fake. They are selling laptops and iPhones and everything but are all fake. Business ethics are few and patents and intellectual property mean zero. I am in the biotech space and the corners that are cut for manufacturing biologics would terrify you. If you are not on top of them all the time, they will cut corners. And this is for things that are going to be used to treat people!
For a bike, unless some guy is there that knows 100% what a bike is going to be used for and the standards that need to be met, I would not trust some guy to make an honest part.
For a bike, unless some guy is there that knows 100% what a bike is going to be used for and the standards that need to be met, I would not trust some guy to make an honest part.
#20
Senior Member
I'm with the OP, I wonder about the carbon frames on ebay by BXT...looks good but who knows, price almost makes it worth a shot,lol.....
#21
Senior Member
Join Date: Jun 2015
Location: South Korea
Posts: 783
Bikes: Merida Speeder
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 165 Times
in
115 Posts
China (The People's Republic of China; Mainland China; "Communism with Chinese Characteristics;" the CCP etc) is a different place to Taiwan (The Republic of China; Formosa; Asian Tiger economy, etc.).
If you have bought a carbon bike or frame from a major company, chances are it was made in Taiwan by a company like Giant. Giant has been really innovative over the years and lead the way with making carbon frame technology widely available to consumers. They also have a generous carbon frame replacement offer and coverage for manufacturing defects. In general, carbon frames made in Taiwan have the carbon fibers carefully laid by hand in molds--it's one of the most highly paid jobs in the Giant factory and often performed by very skilled women--to achieve optimal strength and frame safety. I trust carbon products made in Taiwan as I have ridden them for years without mishap.
The carbon frames OP is talking about are the ones you see on eBay, Aliexpress and Alibaba. They're made in Mainland China and lack all or almost all of the features that make Taiwanese carbon frames reliable. The carbon fibers often aren't laid carefully, and their orientation, based on frame axis, etc, may be off. The vacuum machines for removing all air bubbles from the resin are not as good in some cases and can potentially leave voids within the frame, creating weak spots. Those frames also used to break down under UV light exposure and were weak around the junction of the head tube and the downtube in some cases, leading to failures where the front wheel "dived" under the downtube. There is a small but often vocal minority of Chinese carbon frame defenders who will say that all of the above points are either exaggerated or have been solved, and it may be somewhat accurate, but on the whole, they just can't be trusted. The whole "think light, cheap and durable, now choose two" comes into play, as they're cheap and light. I just don't trust carbon products from Mainland China.
If you have bought a carbon bike or frame from a major company, chances are it was made in Taiwan by a company like Giant. Giant has been really innovative over the years and lead the way with making carbon frame technology widely available to consumers. They also have a generous carbon frame replacement offer and coverage for manufacturing defects. In general, carbon frames made in Taiwan have the carbon fibers carefully laid by hand in molds--it's one of the most highly paid jobs in the Giant factory and often performed by very skilled women--to achieve optimal strength and frame safety. I trust carbon products made in Taiwan as I have ridden them for years without mishap.
The carbon frames OP is talking about are the ones you see on eBay, Aliexpress and Alibaba. They're made in Mainland China and lack all or almost all of the features that make Taiwanese carbon frames reliable. The carbon fibers often aren't laid carefully, and their orientation, based on frame axis, etc, may be off. The vacuum machines for removing all air bubbles from the resin are not as good in some cases and can potentially leave voids within the frame, creating weak spots. Those frames also used to break down under UV light exposure and were weak around the junction of the head tube and the downtube in some cases, leading to failures where the front wheel "dived" under the downtube. There is a small but often vocal minority of Chinese carbon frame defenders who will say that all of the above points are either exaggerated or have been solved, and it may be somewhat accurate, but on the whole, they just can't be trusted. The whole "think light, cheap and durable, now choose two" comes into play, as they're cheap and light. I just don't trust carbon products from Mainland China.
#22
Newbie
Thread Starter
Join Date: Jul 2017
Posts: 52
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Creaks are hard to diagnose, and often involve a lot of trial and error. Having a creak is not necessarily a reason for a new frame
However if you want a new frame you could look at a bikes direct frame. I’ve had a number of their bikes/frames and been happy with them.
However if you want a new frame you could look at a bikes direct frame. I’ve had a number of their bikes/frames and been happy with them.
Anyone else have a place they could recommend?
#24
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,998
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2402 Post(s)
Liked 2,962 Times
in
1,618 Posts
Looking to upgrade mine. I am getting mysterious creaks on climbs and the bicycle store mechanic cannot find the issue. My frame is 6 or 7 years old now and feel it might be time to replace it anyway.
Anyone here get one of those knockoff frames from one the Chinese manufacturers?
Please reply with your experience! Thanks!
Anyone here get one of those knockoff frames from one the Chinese manufacturers?
Please reply with your experience! Thanks!
first is the famous economic fact of TANSTAAFL (There aint no such thing as a free lunch) you do get what you pay for always
Define upgrade: new frame and move parts? or ??? If you are getting new parts it is almost always cheaper to buy a whole new bike.
If you can find the creaks you can't be sure it is not the parts....just be aware of that
What type of bike, what type of riding?
What is your budget?
What is your wrenching skill and tool box size?
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.