1982 Nishiki Cresta
#101
Senior Member
Stunning
#103
Senior Member
Thread Starter
Saguaro Whats the front light you have here?
The light head is mounted to a custom bracket I made to fit to the front fender. This is a very bright light with three brightness settings. I purchased this before they came out with the cool handlebar mounted wireless control.
Like the other accessories on the bike, it was chosen for its performance and aesthetics, it just works.
#104
Senior Member
polymorphself The front light is a Gemini Lights Duo 1500 Lumens. The two-cell rechargeable battery is located in one of the rider side pockets in the front bag with the cord hidden from view under the bag. Gemini offers a four-cell battery as well. https://gemini-lights.com/products/duo-1500-lumens
The light head is mounted to a custom bracket I made to fit to the front fender. This is a very bright light with three brightness settings. I purchased this before they came out with the cool handlebar mounted wireless control.
Like the other accessories on the bike, it was chosen for its performance and aesthetics, it just works.
The light head is mounted to a custom bracket I made to fit to the front fender. This is a very bright light with three brightness settings. I purchased this before they came out with the cool handlebar mounted wireless control.
Like the other accessories on the bike, it was chosen for its performance and aesthetics, it just works.
#105
Newbie
Thanks for clarifying...
I thought the Crestas had cantilever brakes, but apparently not the earlier '82 (I recall an' 82 Miyata 610 I refurbed also had side-pulls)
Likes For Duke of Prunes:
#106
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,343
Bikes: Too Many
Liked 161 Times
in
106 Posts
I found out since posting a few years ago that this is an 84, not an 85. It does have cantis and is built for 27" wheels.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#107
Senior Member
Likes For polymorphself:
#108
Senior Member
Thread Starter
#109
Senior Member
#110
Senior Member
No, it is a 1985 model. That logo font was only used for the 1985 model year. Also, the 1984 version used band mounted shift levers, as opposed to the brazed-on style employed on your bicycle. I suspect the confusion may be related to a serial number that indcates manufacture during the 1984 calendar year. Manufacturers typically start building the new models around September, so there would be lots of 1985 models with 1984 serial numbers.
#111
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,343
Bikes: Too Many
Liked 161 Times
in
106 Posts
No, it is a 1985 model. That logo font was only used for the 1985 model year. Also, the 1984 version used band mounted shift levers, as opposed to the brazed-on style employed on your bicycle. I suspect the confusion may be related to a serial number that indcates manufacture during the 1984 calendar year. Manufacturers typically start building the new models around September, so there would be lots of 1985 models with 1984 serial numbers.
Thanks T-Mar, That is super helpful.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#112
Bike wrench volunteer
The first thing I did was disassemble the bike down to the frame and fork. It then got a wipe down with a soft damp cloth. After the initial cleaning, I applied an automotive paste wax, let it dry, and then buffed it out. The paste wax has mild abrasives that remove the film that builds up over time and obscures the paint finish. In my case, the project went on hold for about three months while I saved up to buy parts. During that three month period, I carefully and repeatedly buffed the frame and fork with a soft cotton cloth. I reapplied the paste wax several times and buffed it out again, by hand. You just have to be persistent and inspect the finish for flaws as you go with a critical eye and in good light.
Likes For retlaw53:
#113
Senior Member
I have the same Cresta and am in the process of restoring it. I used automotive polishing compound to clean it as it is also mildly abrasive. It was surprising how well it worked. The frame is gun metal grey. I just ordered red cable housing. At the crossroads of doing an OEM restoration or a cold set to 130mm and using a 105 10spd group that's gathering dust...decisions, decisions.
Likes For polymorphself:
#114
Bike wrench volunteer
Personally I see no use in OEM restorations for bikes that aren't very specific/niche/collectible/old etc. Touring bikes, especially, are asking to be upgraded/tampered with/customized. If 130mm is what you want, you're going to do it whether it's now or a year from now after having already put time and effort into the OEM path. So just do it now!
Likes For retlaw53:
#115
Senior Member
Awesome! 700x40 with fenders or are you going fenderless? Also, funny enough, me, you and the OP are all in Arizona.
#116
Bike wrench volunteer
Thread
Thread Starter
Forum
Replies
Last Post
jeffree59
Classic & Vintage
9
08-06-10 05:17 PM
hartleymartin
Classic & Vintage
6
07-26-10 11:57 AM