1977 PX10LE Peugeot?
#2
Senior Member
#3
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,954
Bikes: A bunch of old bikes and a few new ones
Liked 4,323 Times
in
2,383 Posts
Evaporust will be your friend in cleaning up all the rusty bits and pieces. Check out the inside. It would not surprise me if this bike ends up needing an oxalic acid bath if there is considerable rust on the inside.
These are great bikes. I like this version even more than the earlier ones. The stronglight 99 crank can be run as a compact crank. 86 bcd chainrings are available. Try Spa cycles in the UK for new chainrings. The maillard 700 hubs are good hubs. That saddle has seen better days.
If you plan on selling it as is, the rust won't help. This bike might be worth around $150. The pandemic has pushed up used bike prices but this bike is not serviceable as is and requires a lot of work to make it rideable. Plus it has tubulars which do not help the value.
These are great bikes. I like this version even more than the earlier ones. The stronglight 99 crank can be run as a compact crank. 86 bcd chainrings are available. Try Spa cycles in the UK for new chainrings. The maillard 700 hubs are good hubs. That saddle has seen better days.
If you plan on selling it as is, the rust won't help. This bike might be worth around $150. The pandemic has pushed up used bike prices but this bike is not serviceable as is and requires a lot of work to make it rideable. Plus it has tubulars which do not help the value.
#5
Senior Member
Is that where the serial number should be? Could be on the head tube, seat tube, dropout, etc.
Value will be next to impossible to assess until the rust is taken care of.
Value will be next to impossible to assess until the rust is taken care of.
#6
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,426
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Liked 2,338 Times
in
836 Posts
Serial number should be on the BB, parallel with the spindle; about 1978 or so the serial number starts getting stamped perpendicular to the spindle. This vintage they had returned to a slacker head and seat angles than some produced c.1973-74 but with less fork rake. Evapo-rust works wonders, and there's always an O/A bath option. It's been repainted, but who knows, maybe it will come off and reveal the original finish. You definitely want to soak all the components and chromed bits in Evapo-Rust, though, it won't harm the aluminum and will shock you at how well it removes rust. Good luck!
#7
Member
Thread Starter
Thanks everyone for your input so far. I think the brown is only a thin coat that was applied without much prep. Previous bikes I've worked on didn't require a OA bath, so this is new. I'm going to post a detailed frame restoration at C&V. I'm still curious why I can't find a S/N.
#8
Junior Member
Depends where you live honestly. Here in the Bay Area, CA - bike prices are through the god damn roof for everything. There was a guy selling his PX-10 for $1200 (!!!!) on CL. I'd say in a market like that, you could get $300 ish for this bike as is. Otherwise, just give it a tune-up, maybe some new tires, and enjoy it for what it is.
#9
Senior Member
Join Date: Sep 2010
Location: Rupert's Land
Posts: 1,295
Bikes: 1981 Raleigh GP, 1985 Norco Bush Pilot, . . .
Liked 208 Times
in
150 Posts
In general, Peugeot frames from the 1970s with forged dropouts did not have a serial number stamped on the dropout. Instead the serial number was usually put on the BB shell. Sometimes the serial number was stamped into the BB shell and other times the serial number was stamped onto a metal plate that was riveted to the BB shell.
I have taken a look at my collection of Peugeot photos. For the PX10LE from 1977 the serial number was usually on a riveted plate.
Here is link to an example from a PX-60 with a BB shell similar to yours.
https://2img.net/r/hpimg15/pics/686989IMG0431.jpg
This example is from:
Peugeot PX 60 Gentlemen de 1976
Sometimes the riveted plate is removed by accident or design. Then there are two rivet holes left in the BB shell.
The BB shell on your Peugeot does not have the holes for the rivets. Hmmm?
I have taken a look at my collection of Peugeot photos. For the PX10LE from 1977 the serial number was usually on a riveted plate.
Here is link to an example from a PX-60 with a BB shell similar to yours.
https://2img.net/r/hpimg15/pics/686989IMG0431.jpg
This example is from:
Peugeot PX 60 Gentlemen de 1976
Sometimes the riveted plate is removed by accident or design. Then there are two rivet holes left in the BB shell.
The BB shell on your Peugeot does not have the holes for the rivets. Hmmm?