Trek better than Cervelo?
#1
Senior Member
Thread Starter
Trek better than Cervelo?
Is Trek considered a better bike than Cervelo? I'm looking at a Trek Domane SL7 Di2 and the new Cervelo Caledonia Di2. The specs are pretty similar but the Caledonia is $1500 cheaper than the Trek. Haven't been real impressed with my Domane SL5 as I have had problems right from the start with it. My LBS has been great and eventually got it straightened out. I bought a Trek because that is what my LBS sold in my price range. I'd like to move up to Di2 and I'm looking at these bikes. The price makes the Caledonia very attractive. I'm pretty new to cycling and not all that knowledge about the different brands. Any thoughts are appreciated.
#2
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Liked 2,435 Times
in
1,187 Posts
Ride both and buy the one that fits best.
Likes For GlennR:
#3
Banned
It's a frame & fork with same (?) component parts .. After sale support ? Trek has a lot more retail dealers.. ..
Seems your issue is with the dealer, not the bike brand..
...
Seems your issue is with the dealer, not the bike brand..
...
Last edited by fietsbob; 08-03-20 at 11:22 AM.
Likes For fietsbob:
#4
Senior Member
Join Date: Jul 2013
Location: NJ, USA
Posts: 1,286
Bikes: two blacks, a blue and a white.
Liked 860 Times
in
412 Posts
Tough call since the Caledonia's pretty new, but I've been extreeeemly happy with my R3. Looking at the bikeradar "pre-review" -- looks like they've done some really smart mods to the R design. Have to agree w/ Glenn, above, nonetheless, fit is paramount. If you don't notice much difference, then buy the one you think is cooler - the second most important factor.
#5
Personally I would pass on any bike with a press-fit bottom bracket. That is my opinion based on experience and feed back from close friends.
What is so compelling about Di2?
That money over mechanical could go into better wheels which are generally pretty poor on complete bikes.
What is so compelling about Di2?
That money over mechanical could go into better wheels which are generally pretty poor on complete bikes.
#7
Banned
"Better" is an Opinion, you are welcome to form your own..
My LBS sells Trek since 88, but nobody here has Carbon Di 2 kind of money ..
Or, if they got more than basic $ they go eBike electric assist, instead.
My LBS sells Trek since 88, but nobody here has Carbon Di 2 kind of money ..
Or, if they got more than basic $ they go eBike electric assist, instead.
Last edited by fietsbob; 08-03-20 at 04:54 PM.
#8
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,872
Bikes: RSO E-tire dropper fixie brifter
Liked 3,306 Times
in
2,098 Posts
I'd go with the Cervelo Caledonia & dump the savings into accessories, new wheels, & a nice tall glass of your choice of beverage.
__________________
-YMMV
-YMMV
Likes For aclinjury:
#11
I would say they are equal bikes in quality. Trek however will give you much more reliable service. Cervelo is not a big brand for any independent retailer.
They are both mid-quality bikes that in either case would be great to own but if you get the Cervelo and the bottom bracket creaks, you will regret not keeping the Domane or getting another with a threaded bottom bracket.
Look at Specialized too.
They are both mid-quality bikes that in either case would be great to own but if you get the Cervelo and the bottom bracket creaks, you will regret not keeping the Domane or getting another with a threaded bottom bracket.
Look at Specialized too.
Likes For Mulberry20:
#12
Senior Member
Join Date: Jul 2019
Location: In the south but from North
Posts: 718
Bikes: Turner 5-Spot Burner converted; IBIS Ripley, Specialized Crave, Tommasini Sintesi, Cinelli Superstar, Tommasini X-Fire Gravel
Liked 395 Times
in
223 Posts
How is your Cervelo dealer? Your prior trek had problems but the dealer helped to get things worked out. Would your Cervelo dealer do the same? How hard are you on bikes? I have heard bad stories of people having to work with Cervelo regarding damaged frames. Not so much with Trek. Also, Trek appears to have dropped the price on the Trek Domane SL7 Di2 making it about $500 above the Cervelo.
#13
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,872
Bikes: RSO E-tire dropper fixie brifter
Liked 3,306 Times
in
2,098 Posts
I would say they are equal bikes in quality. Trek however will give you much more reliable service. Cervelo is not a big brand for any independent retailer.
They are both mid-quality bikes that in either case would be great to own but if you get the Cervelo and the bottom bracket creaks, you will regret not keeping the Domane or getting another with a threaded bottom bracket.
Look at Specialized too.
They are both mid-quality bikes that in either case would be great to own but if you get the Cervelo and the bottom bracket creaks, you will regret not keeping the Domane or getting another with a threaded bottom bracket.
Look at Specialized too.
__________________
-YMMV
-YMMV
#15
Banned
I'm still seeing $6000 for the Trek and $4500 for the Cervelo. The Trek has carbon wheels and threaded bottom bracket. I'd be tempted to investigate, see if one of the threaded conversions is available for the Cervelo. If the price difference actually has come down to $500, it would be worth that for the threaded BB alone, IMO.
Likes For shelbyfv:
#16
Senior Member
Thread Starter
How is your Cervelo dealer? Your prior trek had problems but the dealer helped to get things worked out. Would your Cervelo dealer do the same? How hard are you on bikes? I have heard bad stories of people having to work with Cervelo regarding damaged frames. Not so much with Trek. Also, Trek appears to have dropped the price on the Trek Domane SL7 Di2 making it about $500 above the Cervelo.
Likes For Gundo:
#17
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,574
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Liked 2,367 Times
in
1,573 Posts
Are you in northern NJ? If so Garrisons in Wilmington can’t be beat for Cervelo
#21
If the bicycle has no major quality build issues within a season of riding, it would be safe to rely on it for a longer timeframe. TREK may be bigger as a business, but they have not shown me that they are superior than a smaller business when it comes to needing help with the products they've sold. If anything, a smaller business is likely to work harder to satisfy a customer or potential customer in order to established a good name for themselves.
I hear it every night riding around Central Park. If I go to the dark side and get a carbon bike I will only get a Specialized, Pinarello or Trek.
#22
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,300
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 & 2019 Cervelo R3’s & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Liked 1,318 Times
in
756 Posts
Bond it in with Loctite 641 Retaining Compound.
The Rotor I took out was a two piece with a plastic sleeve in the middle. Yuk.
I did just that and now I can pop just the sealed bearings out and replace them in 10mins should I ever need to.
Barry
#23
You may want to think about just upgrading the components on your Trek SL5 to Di2. The difference between the SL5 and 7 are the components and the wheelset. If you sell the SL5 you are going to take a hit on it, so that is money thrown away. Then you add the price difference between the two bikes and that is a chunk of change. It may be more cost effective to upgrade.
I am/was in similar predicament with my SL6. The mechanical is great but Di2 is better so I waited for deals and purchased everything I need to convert my SL6 to a SL7 (minus the wheels). Currently I am just awaiting the wiring which should arrive this week and then I will start the conversion myself. The Trek manual lays everything out for installation including which length of wiring to purchase. In the end it will be cheaper for me to do it this way then to try and sell my bike etc. It was cheaper for me to do it this way.
This option is not for everyone and may not work for you but it may when you start adding up the costs. Good luck in whatever you decide.
I am/was in similar predicament with my SL6. The mechanical is great but Di2 is better so I waited for deals and purchased everything I need to convert my SL6 to a SL7 (minus the wheels). Currently I am just awaiting the wiring which should arrive this week and then I will start the conversion myself. The Trek manual lays everything out for installation including which length of wiring to purchase. In the end it will be cheaper for me to do it this way then to try and sell my bike etc. It was cheaper for me to do it this way.
This option is not for everyone and may not work for you but it may when you start adding up the costs. Good luck in whatever you decide.
Likes For blakcloud:
#24
well hello there
Join Date: May 2005
Location: Point Loma, CA
Posts: 15,435
Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)
Liked 343 Times
in
211 Posts
good move on the upgrade to Di2. You won't regret it. No one ever does.
__________________
.
.
Two wheels good. Four wheels bad.
.
.
Two wheels good. Four wheels bad.
Likes For Nachoman:
#25
Retro-nerd
Cervelo are no longer located in Toronto or owned by the original owners.
Founded by Gerard Vrooman and Phil White, engineering students at McGill University in Montreal, the company was sold to the Dutch-based Pon Holdings in 2012, but the headquarters and design facility stayed in Toronto on Leswyn Road in Toronto. Both founders left the company, and now the last remaining Canadian connection is gone.
Most of their manufacturing has moved to China resulting in lower quality control. Their reputation has taken a little bit of a hit. Some of the bottom bracket issues are due to irregular ovals for the cavity housing the bottom bracket.
Founded by Gerard Vrooman and Phil White, engineering students at McGill University in Montreal, the company was sold to the Dutch-based Pon Holdings in 2012, but the headquarters and design facility stayed in Toronto on Leswyn Road in Toronto. Both founders left the company, and now the last remaining Canadian connection is gone.
Most of their manufacturing has moved to China resulting in lower quality control. Their reputation has taken a little bit of a hit. Some of the bottom bracket issues are due to irregular ovals for the cavity housing the bottom bracket.
__________________
Would you like a dream with that?
Would you like a dream with that?