Where Are Trek Bicycles Actually Made? Which Factory Makes Them?
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: Springdale, Arkansas
Posts: 318
Bikes: 2021 Trek Domane SLR7 Project One 62cm- 2010 Specialized Allez 61cm
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 118 Post(s)
Liked 88 Times
in
44 Posts
Where Are Trek Bicycles Actually Made? Which Factory Makes Them?
All,
Curious as to where Trek bicycles are actually made. By one of the big manufacturers and what country?
Thanks.
Glenn
Curious as to where Trek bicycles are actually made. By one of the big manufacturers and what country?
Thanks.
Glenn
Last edited by GAtkins; 08-17-20 at 05:26 PM.
#2
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,434 Times
in
1,187 Posts
Not in the USA anymore. My 2015 Project One was the last year for a USA made frame.
Likes For GlennR:
#3
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,667
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,176 Times
in
2,016 Posts
2012 iirc Wisconsin
__________________
-YMMV
-YMMV
#5
Banned
Giant makes a lot of them , highest end carbon are made in Wisconsin they did that for their partially USPS Sponsored Pro Team
Maybe the 520 are from Maxway , Big in multi brand contract manufacturing in Steel
.....
Maybe the 520 are from Maxway , Big in multi brand contract manufacturing in Steel
.....
Last edited by fietsbob; 08-20-20 at 09:58 AM.
#9
Senior Member
Giant right now is the best carbon bike manufacturer. Nothing Wisconsin knows that Giant doesn't already know or could do better (if they wanted to).
Likes For aclinjury:
Likes For Mulberry20:
#11
Senior Member
Join Date: Sep 2014
Location: Southern California
Posts: 595
Bikes: Bianchi Oltre XR4 Celeste, De Rosa SK Pininfarina, Giant TCR SL, Giant Revolt Advanced Revolt 0 Gravel Bike, Trek Madone SLR, Cervelo R5 Disk
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 376 Post(s)
Liked 124 Times
in
65 Posts
The owner of my Trek dealer told me Giant makes most Trek's. The owner of my Giant dealer told me most Trek's are made by Giant.
#13
Senior Member
Yes, despite all the "Trek Factory Tour" videos on Youtube, the Trek factory ain't really in Wisconsin.
#14
Senior Member
I got to visit the Trek Factory in Waterloo, WI after one of the races during SuperWeek in the early 1990s. They were actually working on OCLV frames when we went through, gluing them together on jigs.
Interestingly, I had crashed that day or maybe it was the day before on 2300 and someone sat down on my seatstay and bent it inwards. I brought the frame in and asked one of the guys there if it could be fixed and pulled out and he said, "Oh yea, we'll just heat it up and soften the bond and replace that tube-- probably the whole rear triangle just to be quick about it." He didn't recommend just pulling the aluminum straight again with the Park frame tool. He said I could leave it and pick it up in a couple days because they'd have to paint it again. I said that the wheel still sat straight and I only had a couple more days of racing to go and said I'd mail it back through the shop I worked at. He said that would be fine too, I'd just have to pay for the paint and shipping.
True to their word, I got the bike back looking brand new (and even a new threadless fork!) and with the latest color paint on it. For a minute I thought maybe they just sent me a new frame, but the serial number was the same on the bottom bracket.I think it was $120 with shipping.
Was a fan of Trek before then, and a bigger proponent of them after that.
Raced 3 more seasons in Europe (amateur stuff) including some nasty cobbled events and frame never gave me a bit of worry. Wish I hadn't sold it to help buy my plane ticket home...
Interestingly, I had crashed that day or maybe it was the day before on 2300 and someone sat down on my seatstay and bent it inwards. I brought the frame in and asked one of the guys there if it could be fixed and pulled out and he said, "Oh yea, we'll just heat it up and soften the bond and replace that tube-- probably the whole rear triangle just to be quick about it." He didn't recommend just pulling the aluminum straight again with the Park frame tool. He said I could leave it and pick it up in a couple days because they'd have to paint it again. I said that the wheel still sat straight and I only had a couple more days of racing to go and said I'd mail it back through the shop I worked at. He said that would be fine too, I'd just have to pay for the paint and shipping.
True to their word, I got the bike back looking brand new (and even a new threadless fork!) and with the latest color paint on it. For a minute I thought maybe they just sent me a new frame, but the serial number was the same on the bottom bracket.I think it was $120 with shipping.
Was a fan of Trek before then, and a bigger proponent of them after that.
Raced 3 more seasons in Europe (amateur stuff) including some nasty cobbled events and frame never gave me a bit of worry. Wish I hadn't sold it to help buy my plane ticket home...
Last edited by spank226; 08-20-20 at 12:01 PM.
#15
Full Member
Join Date: Oct 2019
Location: Foothills of West Central Maine
Posts: 410
Bikes: 2007 Motobecane Fantom Cross Expert, 2020 Motobecane Omni Strada Pro Disc (700c gravel bike), 2021 Motobecane Elite Adventure with Bafang 500W rear hub drive
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Likes: 0
Liked 144 Times
in
94 Posts
Taiwan
Don't know what factory, but I was reading up on this subject yesterday, starting by asking Google which bike brands are manufactured in USA. Long story short, all the big brands are made in Taiwan, even the ones that once were made in USA.
There are smaller, boutique brands manufactured in the states, but none of the dominant players.
There are smaller, boutique brands manufactured in the states, but none of the dominant players.